Signature Design by Ashley D335-15 Round Drop Leaf Dining Table Assembly Instructions
Product Model: D335-15
Brand: Signature Design by Ashley
Important Safety Information
General Assembly Precautions:
- Always use the correct tools for assembly.
- Follow the assembly steps in the sequence provided; do not skip any steps.
- Carefully inspect all packing materials for any small parts that may have become loose during shipping. If any parts are missing, contact the retailer from which the product was purchased to obtain replacements. Do not use substitute parts.
- Periodically check to ensure all connectors (bolts, screws, etc.) remain tight.
- Retain these instructions for future reference.
- Exercise extreme caution when handling glass or mirrors, as breakage can cause severe injury. Never handle large pieces of glass or mirrors alone.
- For products with electrical cords (lamps, lights), ensure the cord is unplugged before assembly and avoid twisting the cord during the process.
- When assembling shelves or entertainment centers, use a step ladder; do not stand on lower shelves to reach upper ones.
- Do not stand on tables, including end tables, coffee tables, and dining tables, as they are not designed to support the weight of a person.
- If assembly instructions indicate that two or more people are required, do not attempt to assemble the unit by yourself to avoid the risk of injury.
Manufacturer's Liability Notice: Ashley Furniture Industries, LLC is not liable for damages or injuries that may occur due to failure to properly follow assembly instructions, correctly assemble the product, or use the product appropriately.
Product Appearance: Please note that your unit may differ in appearance from the illustrations provided on this instruction sheet.
The original document also contains safety notices in Spanish, French, and Chinese, reiterating these important precautions.
Parts Identification
The following parts are included for assembly:
| Part | Description | Quantity | Details |
|---|---|---|---|
| A | Tabletop | 1 | Oval-shaped main surface. |
| B | Leg | 4 | Vertical support pieces. |
| C | Bolt Assembly | 8 | Includes bolt, washer, and nut; 5/16" x 60mm. |
| D | Screw | 1 | M4 size. |
Assembly Steps
Important Assembly Note: It is recommended that this unit be assembled by two or more people. Do not fully tighten any bolts until all bolts have been started and are in place.
Step 1: Attach Legs to Tabletop
Secure each of the four legs (Part B) to the underside of the tabletop (Part A). Use eight bolt assemblies (Part C), each consisting of a bolt, washer, and nut, to attach the legs. A detailed view shows a bolt passing through a mounting bracket on the tabletop and into the top of the leg. An M4 screw (Part D) is also shown, which may be used for an additional fastening point.
[Diagram Description: The diagram illustrates the underside of the tabletop (Part A) with four legs (Part B) positioned for attachment. Bolt assemblies (Part C) are shown being inserted through brackets and into the legs. A magnified view details the bolt, washer, and nut connection. The M4 screw (Part D) is also depicted.]
Step 2: Final Placement
Once assembly is complete, the table is shown with its drop leaves in the lowered position. A curved arrow indicates the action of rotating or positioning the assembled table.
[Diagram Description: The illustration shows the fully assembled dining table, standing on its four legs, with the drop leaves in the down position. A curved arrow suggests turning or moving the table into its final location.]
Customer Support
For assistance with replacement parts or product support, please contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Telephone: 1-844-966-0809
