Signature Design by Ashley D594, D595, D596, D589-42 Assembly Instructions

Important Safety Notice

Always use proper tools. Follow the assembly steps in order; do not skip any steps. Carefully check all packing materials for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS. Periodically check to ensure that all connectors (bolts, screws, etc.) are tight. Keep these instructions for future reference.

Some assembly may involve attaching glass or mirrors. Be very careful handling glass or mirrors, as severe injury may result if they break. Never handle large pieces of glass or mirrors alone.

When assembling products with electrical cords (lamps, lights, etc.), always ensure the electrical cord is unplugged before assembly and be careful not to twist the electrical cord during assembly.

When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.

Do not stand on tables, including end tables, coffee tables, and dinner tables, as tables are not designed to support the weight of a person.

Where assembly instructions state that two or more people are required, do not attempt assembly alone, as there is a risk of injury.

Note: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.

Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.

(Safety notices also provided in Spanish, French, and Chinese in the original document.)

Parts List

Please verify all parts are present before beginning assembly.

A: Table Top (x1)
B: Leaf (x1)
C: Legs (x4)
D: Lower Shelf (x1)
E: Support Brace (x1)
F: Corner Brackets (x4)
G: Screws (x8)
H: Bolts (x16)
J: Screws (x4)
K: Allen Wrench (x1) - [tool not included]
L: Washers (x8)

Note: Each leg and corner are labeled with a number. Align each leg with the corresponding corner.

Assembly Steps

Important Note: The unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started.

Step 1: Attach Legs to Table Top

Attach the four Legs (C) to the underside of the Table Top (A) using sixteen Bolts (H) and eight Washers (L). Use the Allen Wrench (K) to start tightening the bolts. Ensure all bolts are started before fully tightening.

[Diagram shows four legs being attached to the underside of the table top using bolts and washers.]

Step 2: Attach Lower Shelf and Support Brace

Attach the Lower Shelf (D) and Support Brace (E) between the Legs (C). Secure them using eight Screws (G).

[Diagram shows the lower shelf and support brace being fitted between the legs and secured with screws.]

Step 3: Secure Corner Brackets

Attach the four Corner Brackets (F) to connect the Lower Shelf (D) and Support Brace (E) to the Legs (C). Use four Screws (J) for this step.

[Diagram shows corner brackets being attached to reinforce the structure, using screws.]

Step 4: Attach Table Top Surface

Attach the main Table Top surface (part of A) to the assembled leg structure. Secure it using four Screws (G).

[Diagram shows the top surface being attached to the base assembly with screws.]

Step 5: Prepare Table Top

Prepare the table top for leaf attachment. This may involve removing a component or sliding a part.

[Diagram shows a callout with the text "Remove" and an arrow pointing upwards, indicating a part is to be removed or detached.]

Step 6: Position Base on Table Top

Carefully place the assembled base structure onto the prepared table top.

[Diagram shows the assembled leg structure being placed onto the table top.]

Step 7: Prepare for Leaf Attachment (Optional)

Follow these instructions to add the leaf to the table (optional).

[Diagram shows the table with extending mechanisms and the leaf positioned nearby. Callouts show leaf locking mechanisms.]

Step 8: Extend Table Mechanism

Extend the table mechanism by sliding the table halves apart. Arrows indicate the direction of extension.

[Diagram shows the table top extending outwards with arrows indicating the movement.]

Step 9: Place Leaf

Place the Leaf (B) onto the extended table top, aligning it with the gap.

[Diagram shows the leaf being placed onto the extended table.]

Step 10: Secure Leaf

Slide the Leaf (B) into place to close the gap and complete the table extension. Arrows indicate the direction of sliding.

[Diagram shows the leaf being slid into its final position.]

Step 11: Lock Leaf in Place

Secure the leaf using the provided locking mechanisms. These mechanisms are typically located on the underside of the table and leaf.

[Diagram shows the underside of the table with the leaf attached, and callouts detailing the leaf locking hardware.]

	Signature Design by Ashley D594, D595, D596, D589-42 Assembly Instructions Assembly instructions and safety notices for Signature Design by Ashley furniture models D594, D595, D596, D589-42. Includes parts list and step-by-step guidance for assembly.
	Signature Design by Ashley D743-35 Oval Dining Extension Table Assembly Instructions Step-by-step assembly guide and safety information for the Signature Design by Ashley D743-35 Oval Dining Extension Table. Includes parts list and contact details for assistance.
	Signature Design by Ashley D589-01 Assembly Instructions Comprehensive assembly instructions and safety guidelines for the Signature Design by Ashley D589-01 dining chair. Includes parts list, step-by-step guidance, and contact information for support.
	Signature Design by Ashley D394-32 Table Assembly Instructions Assembly instructions and safety guide for the Signature Design by Ashley D394-32 table. Includes parts list, step-by-step assembly, and important safety warnings for furniture assembly.
	Signature Design by Ashley D629-32 Table Assembly Instructions Detailed assembly instructions for the Signature Design by Ashley D629-32 table. Includes a comprehensive parts list, step-by-step guidance, and essential safety warnings for proper furniture assembly.
	Signature Design by Ashley D594-35 Dining Table Assembly Instructions Assembly instructions for the Signature Design by Ashley D594-35 Dining Table, including safety notices and parts list.
	Signature Design by Ashley D617-45 Assembly Instructions Comprehensive assembly guide for the Signature Design by Ashley D617-45 furniture item, including detailed safety precautions and step-by-step instructions for proper construction.
	Signature Design by Ashley D617-45 Rectangle Dining Table Assembly Instructions Concise and SEO-optimized assembly instructions for the Signature Design by Ashley D617-45 rectangle dining table. Includes safety warnings, parts list, and step-by-step guidance.