Signature Design by Ashley T372-1 Coffee Table Assembly Instructions

Important Safety Notice

Always use proper tools.

Follow the assembly steps in order. Do not skip any steps.

Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.

Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.

Keep the instructions for future reference.

Be very careful handling glass or mirrors, as severe injury may result if they break. Never handle large pieces of glass or mirrors alone.

When assembling products with electric cords (lamps, lights, etc.), always ensure the electrical cord is unplugged before assembly and be careful not to twist the electrical cord during assembly.

When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.

Do not stand on tables, including end tables, coffee tables, and dinner tables, as they are not designed to support a person's weight.

Where assembly instructions state that two or more people are required, do not attempt by yourself as there is a risk of injury.

Note: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.

Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.

Identifier	Description	Quantity
A	Base Panel	1
B	Side Frame	2
C	Side Panel	2
D	Back Panel	2
E	Top Panel	1
F	Screw (1/4" x 32mm)	16
G	Allen Wrench (4mm)	1
H	Screw (4 x 35mm)	2

Identifier

Description

Quantity

Base Panel

Side Frame

Side Panel

Back Panel

Top Panel

Screw (1/4" x 32mm)

Allen Wrench (4mm)

Screw (4 x 35mm)

Assembly Instructions

Step 1

Attach the base panel (A) to the side frames (B). Use screws (F) and the Allen wrench (G). Ensure all bolts are started before tightening.

Visual Description: The diagram shows two side frames (B) positioned vertically, with the base panel (A) laid horizontally between them. Fasteners (F) are shown being inserted through holes in the side frames into the base panel, secured by Allen wrench (G). An inset shows a close-up of the connection point. A prominent warning states: "DO NOT TIGHTEN ANY BOLTS UNTIL ALL BOLTS HAVE BEEN STARTED!"

Step 2

Attach the side panels (C) to the assembled frame. Use screws (F) and the Allen wrench (G).

Visual Description: The diagram shows the partially assembled unit from Step 1. Two side panels (C) are being attached to the outer sides of the frame. Insets show close-ups of screws (F) and Allen wrench (G) used for this connection.

Step 3

Attach the back panels (D) to the frame.

Visual Description: The diagram shows the unit from Step 2. Two back panels (D) are being inserted and attached to the rear of the unit.

Step 4

Attach the top panel (E) to the assembled unit. Use screws (F) and the Allen wrench (G).

Visual Description: The diagram shows the unit from Step 3. The top panel (E) is being placed onto the top of the frame. Insets show close-ups of screws (F) and Allen wrench (G) being used to secure the top panel.

Step 5

Attach the feet (labeled '1') to the bottom of the unit using screws (H).

Visual Description: The diagram shows the unit from Step 4. Four feet (labeled '1') are shown being attached to the underside corners of the unit. Screws (H) are indicated for this attachment, with an arrow showing the screwing motion.

Step 6

Final assembly complete.

Visual Description: The diagram shows the fully assembled coffee table, appearing as a finished piece of furniture with sliding barn doors.

	Signature Design by Ashley D629-32 Table Assembly Instructions Detailed assembly instructions for the Signature Design by Ashley D629-32 table. Includes a comprehensive parts list, step-by-step guidance, and essential safety warnings for proper furniture assembly.
	Signature Design by Ashley T102-13/T103-213 Cocktail and End Table Assembly Instructions Assembly guide for Signature Design by Ashley's T102-13/T103-213 furniture set, detailing parts, step-by-step assembly for cocktail and end tables, and care instructions.
	Signature Design by Ashley D629-45 Dining Table Assembly Instructions Step-by-step assembly guide for the Signature Design by Ashley D629-45 dining table, including safety precautions, parts identification, and detailed instructions for assembly and optional leaf attachment.
	Signature Design by Ashley D615-15 Table Assembly Instructions Concise and accessible assembly instructions for the Signature Design by Ashley D615-15 table, including safety notices, parts list, and step-by-step guidance.
	Signature Design by Ashley T255-13 Assembly Instructions Comprehensive assembly instructions for the Signature Design by Ashley T255-13 table series, detailing safety precautions, parts identification, and step-by-step assembly for various configurations. Includes contact information for support.
	Signature Design by Ashley T270-13 Accent Table Assembly Instructions & Safety Guide Comprehensive guide for assembling the Signature Design by Ashley T270-13 accent table, including safety precautions, parts list, and step-by-step instructions for various configurations.
	D546-35 Extendable Dining Table Assembly Instructions \| Signature Design by Ashley Official assembly instructions for the Signature Design by Ashley D546-35 extendable dining table. Includes safety warnings, parts list, and step-by-step assembly guide.
	Signature Design by Ashley D594, D595, D596, D589-42 Assembly Instructions Assembly instructions and safety notices for Signature Design by Ashley furniture models D594, D595, D596, D589-42. Includes parts list and step-by-step guidance for assembly.

Signature Design by Ashley T372-1 Coffee Table