Signature Design by Ashley T102-13/T103-213 Assembly Instructions

Important Safety Information:

Please read all instructions carefully before beginning assembly. Ashley Furniture is not liable for any losses or injuries resulting from improper assembly, incorrect assembly, or misuse of the product. Note that your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.

General Safety & Care Notes:

• For products with electrical cords (lamps, etc.), ensure the power is disconnected before installation and do not twist the cord during installation.
• When installing shelves or cabinets, do not stand on lower shelves; use a ladder for installation.
• Do not stand on tables such as coffee tables, end tables, or dining tables, as they cannot support body weight.
• If assembly requires two or more people, do not attempt to assemble alone, as this may pose a safety risk.
• Use appropriate tools for assembly.
• Follow assembly steps sequentially; do not skip any steps.
• Carefully check packaging materials for small parts that may have scattered during transit. If parts are missing, contact your local retailer for replacements; do not substitute parts.
• Periodically check to ensure all connections (screws, bolts, etc.) are tightened.
• Keep these assembly instructions for future reference.
• When handling glass or mirrors, exercise caution to prevent injury from breakage. Do not attempt to install large pieces of glass or mirrors alone.
• Furniture surfaces require proper maintenance; clean and polish furniture regularly to prevent dust accumulation.

Parts List

Cocktail Table (-1)

• A: Table Top (1 pc)
• B: Frame (1 pc)
• C: Legs (2 pcs)
• D: Bolts (M6x32mm) (8 pcs)
• E: Feet (4 pcs)
• F: Allen Wrench (1 pc)

End Table (-3) (x2)

• G: Table Top (1 pc per table)
• H: Side Panels (2 pcs per table)
• J: Crossbars (2 pcs per table)
• K: Crossbars (2 pcs per table)
• L: Bolts (M6x25mm) (12 pcs per table)
• F: Allen Wrench (1 pc)
• M4: Bolts (Quantity not specified for M4, likely for feet or minor connections)

Assembly Instructions

Important Assembly Notes:

• The unit should be assembled by two or more people.
• Do not tighten any bolts until all bolts have been started.

Cocktail Table Assembly

Step 1: Prepare Components

Lay out all parts for the cocktail table. Identify components A (top), B (frame), C (legs), D (bolts), E (feet), and F (Allen wrench).

Step 2: Assemble Base Frame

Attach the two legs (C) to the frame (B). Then, attach this assembled frame to the underside of the table top (A). Use bolts (D) and the Allen wrench (F) to secure these connections. Arrows in diagrams indicate insertion points.

Step 3: Secure Frame

Continue attaching the remaining two legs (C) to the frame (B) and then to the table top (A), using bolts (D) and the Allen wrench (F) to ensure all frame components are securely fastened.

Step 4: Attach Feet

Screw the feet (E) into the designated holes at the bottom of each leg (C).

Step 5: Finalize Cocktail Table

Ensure all bolts are now fully tightened. The cocktail table is now assembled.

End Table Assembly (Repeat for 2 Tables)

Step 6: Assemble End Table Frame

For each end table, connect the side panels (H) to the crossbars (J and K). Use bolts (L) and the Allen wrench (F) to secure these connections. Arrows in diagrams indicate insertion points. This step is repeated for both end tables.

Step 7: Attach End Table Top

Place the table top (G) onto the assembled end table frame. Secure it using bolts (F). This step is repeated for both end tables.

Step 8: Finalize End Tables

Ensure all bolts are fully tightened on both end tables. The end tables are now assembled.

Step 9: Complete Set

Arrange the assembled cocktail table and the two end tables as desired.

Care and Maintenance

To maintain the finish of your furniture, clean and polish it regularly. Handle glass and mirror components with care during assembly and use to prevent breakage.

Contact Information

For replacement parts or assistance with assembly, please contact:

• Email: RTAParts@ashleyfurniture.com
• Website: www.ashleyfurniture.parts
• Phone: 1-844-966-0809