Assembly Instructions
Caution: You must read this before you proceed.
CAUTION: This table is NOT a TOY. Keep your child / children at bay during the assembly process.
Parts List
| NO. | Picture | Description | QTY |
|---|---|---|---|
| A | [Circular Table Top with an intricate, decorative pattern on its surface.] | Table Top | 1 |
| B | [A single, curved metal leg designed for outdoor furniture, featuring an adjustable leveller at its base.] | Table Leg(with pre-attached Levellers) | 4 |
| C | [A flat, circular metal ring, used to connect the table legs.] | Support Ring | 1 |
Hardware
| No. | Picture | Description | Qty |
|---|---|---|---|
| ① | [A flat, circular metal washer with an 8mm inner diameter.] | Washer(8mm) | 8 |
| ② | [A split, circular metal washer designed to provide tension, with an 8mm inner diameter.] | Spring Washer(8mm) | 8 |
| ③ | [A metal bolt with a hexagonal head, measuring 30mm in length.] | Hex Bolt(30mm) | 8 |
| [A metal bolt with a hexagonal head, measuring 25mm in length.] | Hex Bolt(25mm) | 8 | |
| [A metal tool designed to grip and turn hexagonal bolts.] | Spanner | 1 |
Assembly Preparation
Before Beginning Assembly:
- Read instructions, cover to cover.
- Have 2 adults on hand for assembly.
- Do not assemble on flooring or carpet.
- Assemble on a clean non-marring surface (packing foam).
- Save all packaging until finished.
Assembly Steps
This Table has multiple parts and may require up to some 30 minutes to assemble. The overview pictures are to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1: Unpack and Prepare
Unpack and place all parts on a clean, soft surface.
[Visual: All table parts and hardware laid out neatly on a surface.]Step 2: Attach First Leg to Support Ring
Loosely affix the Support Ring(C) to a Table Leg with pre-attached Levellers(B) using Washers (①), Spring Washers (②), and Hex Bolts (③), with the Spanner(). DO NOT OVERTIGHTEN.
[Visual: Close-up of one Table Leg being attached to the Support Ring. Shows a Hex Bolt passing through a Spring Washer, then a flat Washer, into the leg and support ring. A Spanner is shown engaging the bolt head.]Step 3: Attach Remaining Legs
Repeat Step 2 to attach the remaining 3 Legs(B) to the Support Ring(C). DO NOT OVERTIGHTEN.
[Visual: The Support Ring with all four Table Legs loosely attached.]Step 4: Attach Legs to Table Top
Lay the Table Top(A), facedown, onto a flat, soft, clean surface. Attach the Table Legs(B) to the Table Top(A) using Washers (①), Spring Washers (②), and Hex Bolts (③) with the Spanner(). Tighten all these Hex Bolts and Washers in a sequential manner. DO NOT OVERTIGHTEN.
[Visual: The Table Top is upside down. The assembly of legs to the tabletop is shown, similar to Step 2, with hardware and spanner indicated.]Step 5: Final Tightening and Levelling
Stand the table right side up. Now tighten up all screws. Adjust the Legs' pre-installed Levellers until the Table is level with the ground.
Caution: This TABLE can only be used on a flat, level surface.
[Visual: The assembled table standing upright. An arrow points to the base of a leg, indicating the adjustable leveller, with text "Adjust Pre-installed Levellers height for balance".]Care & Maintenance
- ? Do not put hot items directly on furniture surface.
- ? Do not clean furniture with harsh cleansers or polish.
- ☀️ To obtain the longest lifespan of your outdoor products, minimizing exposure to direct sunlight is recommended.
- ?♂️ Children should not climb or jump on the furniture.
- ✏️ Do not write on furniture without a padded barrier to protect the surface.
- ?️ To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the product and/or place under patio or awnings.
- ? Not for commercial use. For residential use only.
- ? Stains may be removed with mild soap solution and damp cloth.
- ? Dust and pick-up spills using a clean, non-colored, lint-free cloth.
