Use and Care Manual
Assembly Instructions
Please follow these steps carefully for assembly:
- DO NOT fix screws tightly before all screws and holes are connected.
- Keeping all screws half-tightened will make assembling easier.
- Install video available on YOUTUBE. YOUTUBE CODE: QZoCl5C0atw
Important Notes:
- Do not expose the cushions in the sun for a long period of time.
- Cover the set or put cushions indoors when rain or snow is expected for long periods.
- For any inquiries, please email us through your order. We will reply as soon as possible.
Parts List
The following parts are included in your furniture set:
- A: Arm rest-R (3 Pcs)
- B: Arm rest-L (3 Pcs)
- C: Seat frame-Lounge (2 Pcs)
- D: Front-frame-Lounge (2 Pcs)
- E: Back frame-Lounge (2 Pcs)
- F: Seat frame-loveseat (1 PCS)
- G: Front-frame-loveseat (1 PCS)
- H: Back frame-loveseat (1 PCS)
- I: Side frame (2 PCS)
- J: Top frame (2 PCS)
- K: Top frame (1 PCS)
- L: Seat cushion (4 PCS)
- M: Back cushion (4 PCS)
- Q: Wrench (1 PCS)
- R: M6*35mm (20 PCS)
- S: Flat Washer (79 PCS)
- T: M6 NUT (28 PCS)
- U: Wrench (1 PCS)
- V: M6*45mm (28 PCS)
- W: M6*30mm (3 PCS)
Assembly Steps
The following diagrams illustrate the assembly process. Please refer to the part labels (A, B, C, etc.) and hardware (Q, R, S, T, U, V, W) as indicated.
Step 1 & 2: Attach arm rests (B) to the seat frame (C) using screws (V), washers (S), and nuts (T). Repeat for the other arm rest.
Step 3 & 4: Attach the front frame (D) to the assembled seat frame using screws (Q), washers (S), and nuts (T). Repeat for the other side.
Step 5 & 6: Attach the back frame (E) to the seat frame using screws (U), washers (S), and nuts (T). Repeat for the other side.
Step 7 & 8: Assemble the loveseat frame by attaching the arm rests (B) to the seat frame (F) using screws (V), washers (S), and nuts (T). Repeat for the other arm rest.
Step 9 & 10: Attach the front frame (G) to the loveseat seat frame using screws (S) and nuts (T). Repeat for the other side.
Step 11 & 12: Attach the back frame (H) to the loveseat seat frame using screws (R), washers (S), and nuts (T). Repeat for the other side.
Step 13 & 14: Assemble the coffee table by attaching the top frame (J, K) to the side frames (I) using screws (Q) and washers (S).
Final Step: Place the seat cushions (L) and back cushions (M) onto the assembled furniture.
Care Instructions
To maintain the quality and longevity of your outdoor furniture:
- Avoid prolonged exposure of cushions to direct sunlight.
- Store cushions indoors or cover the furniture set during periods of rain or snow.
