Outdoor Furniture Assembly Guide
Model Numbers: PAT7305, PAT-7305
Care and Maintenance
Store outdoor furniture indoors or cover well when not in use. Remove wooden furniture from standing water. Dust regularly with a small brush or vacuum. Spills should be taken care of immediately before they harden or stain with a slightly dampened sponge.
Notice
- Please make sure that you have all parts indicated before you begin assembly of this item.
- This item should be assembled on a soft surface to prevent scratching the finish during assembly.
- This item may require periodic tightening.
Chair and Sofa Assembly
Estimated Assembly Time: 10 minutes. Tools Required: Allen Key (included).
Chair (Model PAT7305)
Weight Capacity: 242 lbs
Warning: Do not stand on chair.
Warning: Do not over torque bolts / screws.
Product Dimensions: 26.7" W x 29.92" D x 30.71" H
Part List and Hardware List (Chair)
| Piece | Description | Quantity | Visual Description |
|---|---|---|---|
| A | Leg Frame | 2X | Tall, U-shaped pieces forming the sides of the chair/sofa frame. |
| B | Back frame | 1X | Rectangular frame with horizontal slats, forming the backrest. |
| C | Seat Frame | 1X | Rectangular frame with horizontal slats, forming the seat base. |
| D | Cross Bar | 1X | A straight bar connecting the two leg frames at the bottom. |
| E | Cushion Seat | 1X | A rectangular cushion for the seat. |
| F | Cushion Back | 1X | A rectangular cushion for the backrest. |
| G | Screw (M6x60) | 2X | Standard screw for initial frame connections. |
| H | Screw (M6x80) | 2X | Longer screws for attaching seat and back frames. |
| I | Bolt (M6x35) | 6X | Bolts used for connecting leg frames to seat and back frames. |
| K | Allen key (LG4) | 1X | Tool for tightening bolts and screws. |
Assembly Steps (Chair)
- Step 1: Attach leg frame (A) to cross bar (D). Use screws (G) and tighten with allen key (K). Diagram shows two leg frames (A) positioned upright, with a cross bar (D) placed between them at the bottom. Screws (G) are shown being inserted.
- Step 2: Tighten screws (H) with allen key (K) to attach seat frame (C) and back frame (B). Diagram shows the back frame (B) and seat frame (C) being attached to the assembled leg structure. Screws (H) are indicated.
- Step 3: Attach leg frame (A) to back frame (B) and seat frame. Use bolt (I) and tighten with allen key (K). Diagram shows bolts (I) being used to connect the leg frames (A) to the back frame (B) and seat frame (C). An enlarged view shows the bolt and allen key connection.
- Step 4: Tighten bolt (I) with allen key (K) to attach seat frame (C) and leg frame (A). Diagram shows the final tightening of bolts (I) connecting the seat frame (C) and leg frames (A).
- Step 5: Ensure all screws are fully locked into position. Place seat cushion (E) and back cushion (F) into the chair. The chair is ready to be used. Diagram shows cushions (E) and (F) being placed onto the assembled chair frame. Arrows indicate placement.
- Step 6: Caution: This chair can only be used on a flat, level surface.
Sofa (Model PAT7305)
Weight Capacity: 488 lbs
Warning: Do not stand on bench.
Warning: Do not over torque bolts / screws.
Product Dimensions: 48.82" W x 29.92" D x 30.71" H
Part List and Hardware List (Sofa)
| Piece | Description | Quantity | Visual Description |
|---|---|---|---|
| A | Leg Frame | 2X | Tall, U-shaped pieces forming the sides of the chair/sofa frame. |
| B | Back frame | 1X | Rectangular frame with horizontal slats, forming the backrest. |
| C | Seat Frame | 1X | Rectangular frame with horizontal slats, forming the seat base. |
| D | Cross Bar | 1X | A straight bar connecting the two leg frames at the bottom. |
| E | Cushion Seat | 2X | Two rectangular cushions for the seat. |
| F | Cushion Back | 2X | Two rectangular cushions for the backrest. |
| G | Screw (M6x60) | 2X | Standard screw for initial frame connections. |
| H | Screw (M6x80) | 2X | Longer screws for attaching seat and back frames. |
| I | Bolt (M6x35) | 6X | Bolts used for connecting leg frames to seat and back frames. |
| K | Allen key (LG4) | 1X | Tool for tightening bolts and screws. |
Assembly Steps (Sofa)
The assembly steps for the sofa are identical to the chair, using the same part labels and hardware. The primary difference is the quantity of seat and back cushions (E and F).
- Step 1: Attach leg frame (A) to cross bar (D). Use screws (G) and tighten with allen key (K).
- Step 2: Tighten screws (H) with allen key (K) to attach seat frame (C) and back frame (B).
- Step 3: Attach leg frame (A) to back frame (B) and seat frame. Use bolt (I) and tighten with allen key (K).
- Step 4: Tighten bolt (I) with allen key (K) to attach seat frame (C) and leg frame (A).
- Step 5: Ensure all screws are fully locked into position. Place seat cushions (E) and back cushions (F) into the sofa. The sofa is ready to be used.
- Step 6: Caution: This sofa can only be used on a flat, level surface.
Table Assembly
Estimated Assembly Time: 10 minutes. Tools Required: Allen Key (included).
Model Number: PAT-7305
Product Dimensions: 35.43" W x 22.44" D x 16.93" H
Part List and Hardware List (Table)
| Piece | Description | Quantity | Visual Description |
|---|---|---|---|
| A | Table Top | 1X | The main rectangular surface of the table, with visible slats. |
| B | Table leg | 4X | Straight legs that attach to the underside of the table top. |
| C | Bolt (M6x65) | 8X | Long bolts used to secure the legs to the table top. |
| D | Flat washer | 8X | Washers used with bolts to distribute pressure. |
| E | Allen key (LG4) | 1X | Tool for tightening bolts. |
Assembly Steps (Table)
- Step 1: Attach leg frame (B) to Table top (A). Use Bolts (C) and Flat washer (D), tighten with allen key (E). Diagram shows the underside of the table top (A) with legs (B) being attached. Bolts (C) and washers (D) are shown being inserted and tightened with the allen key (E). An enlarged view shows the connection detail.
- Step 2: Caution: This table can only be used on a flat, level surface.
