Outdoor Furniture Set Assembly Instructions
Safety and Care Advice
Important Safety Information
-
Warning: This unit weighs approximately 28.5 kgs. Please lift with care.
-
Check you have all the components and tools listed on page 2 and 3.
-
Remove all fittings from the plastic bags and separate them into their groups.
-
Keep children and animals away from the work area; small parts could cause choking if swallowed.
-
Make sure you have enough space to lay out the parts before starting.
-
Do not stand or put weight on the product, this could cause damage.
-
Assemble the item as close to its final position (in the same room) as possible.
-
Assemble on a soft level surface to avoid damaging the unit or your floor (use opened out unit carton).
-
[Warning Symbol] We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers. [Use Hand Screwdriver]
-
Dispose of all packaging carefully and responsibly.
Care and Maintenance
-
From time to time check that there are no loose screws on this unit.
-
This product should not be discarded with household waste. Take to your local authority waste disposal center.
Note: If required, the next page can be cut out and used as reference throughout the assembly. Keep this page with these instructions for future reference.
Components
[Two People Recommended]
Parts List
- Part 1: Sofa Seat Frame (x1)
- Part 2: Sofa Back Frame (x1)
- Part 3: Sofa Armrest (x2)
- Part 4: Armchair Seat Frame (x3)
- Part 5: Armchair Back Frame (x3)
- Part 6: Armchair Armrest (x2)
- Part 7: Coffee Table Base Frame (x2)
- Part 8: Coffee Table Top (x1)
- Part 9: Coffee Table Slatted Top (x1)
- Part 10: Cushions (x4)
- Part 11: Cushions (x2)
- Part 12: Cushion (x1)
Hardware List
- A: Bolt M6x70 mm (x4)
- B: Bolt M6x60 mm (x12)
- C: Bolt M6x50 mm (x2)
- D: Bolt M6x40 mm (x12)
- E: Bolt M6x50 mm (x16)
- F: Allen Key (x3)
Assembly Instructions
Please note when building this product, bolts should be finger tightened until all parts are in place. Only once all parts and bolts are in place should the bolts then be fully tightened using the Allen key.
Step 1: Assemble Sofa
Attach the two Sofa Armrests (Part 3) to the Sofa Seat Frame (Part 1) and Sofa Back Frame (Part 2) using four Bolts A (M6x70 mm) and two Bolts C (M6x50 mm).
Step 2: Assemble Armchairs (x2)
Assemble two Armchairs. For each armchair, attach the Armchair Back Frame (Part 5) to the Armchair Seat Frame (Part 4) using four Bolts B (M6x60 mm) and four Bolts D (M6x40 mm). Then, attach the Armchair Armrests (Part 6) to the seat frame using two Bolts E (M6x50 mm) per armrest. (Note: Diagrams show 2x E per armchair, total 4x E for two armchairs. The components list states E x16).
Step 3: Assemble Coffee Table
Assemble the Coffee Table. Attach the Coffee Table Base Frame (Part 7) to the Coffee Table Top (Part 8) and Slatted Top (Part 9) using four Bolts B (M6x60 mm) and four Bolts D (M6x40 mm). Secure the base to the tops using two Bolts E (M6x50 mm).
Congratulations! Now you have finished assembling the product.
If You Find a Defective Part
We fully stock all parts and components. Any defective part can be quickly replaced. Take note of the defective part number in the manual and we will arrange a replacement.
Copyright
All material in this instruction manual is copyrighted. Any unauthorized use may violate worldwide copyright, trademark, and other laws.
