Assembly Instructions
Caution: You must read these Assembly Instructions before you proceed
Care & Maintenance
[No commercial use icon] Not for commercial use. For residential use only.
[Hot items icon] Do not put hot items directly on furniture surface.
[Cleaner icon] Do not clean furniture with harsh cleansers or polish.
[Sun icon] To obtain the longest lifespan of your outdoor products, minimizing exposure to direct sunlight is recommended.
[Children climbing icon] Children should not climb or jump on the furniture.
[Writing icon] Do not write on furniture without a padded barrier to protect the surface.
[Rain/sun icon] To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the product and /or place under patio or awnings.
[Stain icon] Stains may be removed with mild soap solution and damp cloth.
[Dust icon] Dust and pick-up spills using a clean, non-colored, lint-free cloth.
Ottoman Assembly
Please look on the Seat Panel for hardware packs.
A line drawing of an ottoman.
CAUTION: This Footrest is NOT a TOY. Keep your child / children at bay during the assembly process. For moving the Footrest and to prevent damage to the Footrest, two adults may be needed to execute this action.
Parts List
| Label | Picture | Description | QTY |
|---|---|---|---|
| K | Diagram of a leg panel. | Leg Panel | 2 |
| L | Diagram of a side panel. | Side Panel | 2 |
| M | Diagram of a seat panel. | Seat Panel | 1 |
| N | Diagram of a seat cushion. | Seat Cushion | 1 |
Hardware
| Label | Picture | Description | QTY |
|---|---|---|---|
| ⑤ | Diagram of a bolt. | Bolt (M6 x 40mm) | 9 |
| ⑥ | Diagram of a screw. | Screws (M6x45mm) | 5 |
| ⑦ | Diagram of an Allen wrench. | Allen Wrench | 1 |
Assembly Preparation
Before Beginning Assembly:
Diagram showing parts and hardware.
Read instructions, cover to cover.
[Two people icon] Have 2 adults on hand for assembly.
[No assembly on floor icon] Do not assemble on flooring or carpet.
[Clean surface icon] Assemble on a clean non-marring surface (packing foam).
[Packaging icon] Save all packaging until finished.
Assembly Steps
Overview
Diagram of the ottoman with parts labeled: Seat Cushion (N), Panel legs side (L), Panel legs Front, rear (K), Seat Panel (M).
This Ottoman has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Ottoman parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1
Unpack and place all parts on a clean, non-marring surface.
Step 2
Diagram showing the assembly of leg panels and side panels using bolts and an Allen wrench.
Place Leg Panel (K) facedown as pictured above. Insert the tenons on Side Panels (L) into the mortises of Leg Panel (K). Attach Side Panels (L) to Leg Panel (K) using Bolts (⑤) with Allen Wrench (⑦). Repeat the same process with the remaining Leg Panel (K). Do not fully tighten the Bolts.
Step 3
Diagram showing the attachment of the seat panel to the assembled frame using screws and an Allen wrench.
Insert Seat Panel (M) into assembled Ottoman frame as pictured above. Attach Seat Panel (M) to Side Panels (L) using Screws (⑥) with Allen Wrench (⑦). Note: Insert Screws (⑥) from inside to outside of Seat Panel (M). Do not fully tighten the Screws.
Step 4
Diagram showing how to adjust the levellers for balance.
Place the Ottoman onto a flat, level surface. Then EXERT pressure, floorwards onto the Ottoman with both hands. This pressure will help the Ottoman reach full alignment at all joints. In a sequential manner, gradually tighten all Bolts and Screws at all joints until evenly secured. Inspect the Ottoman and make sure all parts are adequately connected. Adjust the Levellers until the Chair is level with the ground. To adjust the Levellers, get assistance from an adult partner to lift/lean and hold the Chair while you are working.
Step 5
Diagram showing the placement of the seat cushion.
Place Seat Cushion (N), to Seat Panel (M). Inspect it and make sure all parts are adequately connected. Ensure all screws, bolts are fully locked into position and secured. The Footrest is ready to be used. Caution: This Armchair can only be used on a flat, level surface.
Coffee Table Assembly
Please look on the Top Panel for hardware packs.
A line drawing of a coffee table.
CAUTION: This Table is NOT a TOY. Keep your child / children at bay during the assembly process. For moving the Sun Lounger and to prevent damage to the Table, One adult may be needed to execute this action.
Parts List
| Label | Picture | Description | QTY |
|---|---|---|---|
| O | Diagram of a table top. | Table Top | 1 |
| P | Diagram of legs. | Legs | 4 |
Hardware
| Label | Picture | Description | QTY |
|---|---|---|---|
| 8 | Diagram of a bolt. | Bolts (M8 x 60mm) | 9 |
| 9 | Diagram of a flat washer. | Flat Washers (D20xT2mm) | 9 |
| 10 | Diagram of an Allen wrench. | Allen Wrench | 1 |
Assembly Preparation
Before Beginning Assembly:
Diagram showing parts and hardware.
Read instructions, cover to cover.
[Two people icon] Have 2 adults on hand for assembly.
[No assembly on floor icon] Do not assemble on flooring or carpet.
[Clean surface icon] Assemble on a clean non-marring surface (packing foam).
[Packaging icon] Save all packaging until finished.
Assembly Steps
Overview
Diagram of the coffee table with parts labeled: Table top (O), Legs (P).
This Sun Lounger has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Sun Lounger parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1
Unpack and place all parts on a clean, non-marring surface.
Step 2
Diagram showing the attachment of legs to the table top using bolts, flat washers, and an Allen wrench.
2.1) Turn the Table top (O) up side down as shown in picture above. 2.2) Attach the Leg (P) to by using Bolts (8), Flat washer (9) and Allen Wrench (10) as shown in picture above. Repeat the same process to attach the 3 remaining Leg (P). into the Table Top (O). Do not fully tighten the Bolts.
Step 3
Diagram showing the assembled coffee table.
Turn the Table back to normal flat ground. EXERT pressure, floorwards, onto the Table. This pressure will help the Legs and Table Top reach alignment at all joints. Check for wobbles. In a sequential manner, gradually tighten all Bolts/Screws until evenly secured. Inspect the Table and make sure all parts are adequately connected. Your Table is ready for use. This Table can only be used on a flat, level surface.
3 Seater Assembly
Please look in the Seat Panel for hardware packs.
A line drawing of a 3-seater sofa.
CAUTION: This 3 Seater is NOT a TOY. Keep your child / children at bay during the assembly process. Whenever lifting or moving the 3 Seater and to prevent any damage to it, two adults may be needed to execute these actions.
Part List
| Label | Picture | Description | QTY |
|---|---|---|---|
| A | Diagram of a right leg panel. | Right Leg Panel | 1 |
| B | Diagram of a right middle leg panel. | Right Middle Leg Panel | 1 |
| C | Diagram of a left leg panel. | Left Leg Panel | 1 |
| D | Diagram of a left middle leg panel. | Left Middle Leg Panel | 1 |
| E | Diagram of a backrest panel. | Backrest Panel | 2 |
| F | Diagram of a seat panel. | Seat Panel | 2 |
| G | Diagram of a support bar. | Support Bar | 4 |
| H | Diagram of a seat cushion. | Seat Cushion | 3 |
| I | Diagram of a back cushion. | Back Cushion | 2 |
| J | Diagram of a middle back cushion. | Middle Back Cushion | 1 |
Hardware
| Label | Picture | Description | QTY |
|---|---|---|---|
| 1 | Diagram of a bolt. | Bolt (M6x35mm) | 9 |
| 2 | Diagram of a bolt. | Bolt (M6x40mm) | 11 |
| 3 | Diagram of a screw. | Screws (M6x45mm) | 9 |
| 4 | Diagram of an Allen wrench. | Allen Wrench | 2 |
Assembly Preparation
Before Beginning Assembly:
Diagram showing parts and hardware.
Read instructions, cover to cover.
[Two people icon] Have 2 adults on hand for assembly.
[No assembly on floor icon] Do not assemble on flooring or carpet.
[Clean surface icon] Assemble on a clean non-marring surface (packing foam).
[Packaging icon] Save all packaging until finished.
Assembly Steps
Overview
Diagram of the 3-seater sofa with parts labeled: Back Cushion (I), Backrest Panel (E), Right Leg Panel (A), Seat Cushion (H), Left Leg Panel (C), Seat Panel (F), Support Bar (G), Right middle leg panel (B), Left middle leg panel (D), Middle Back Cushion (J).
This 3 Seater has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the 3 Seater parts, the above picture is provided to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1
Unpack and place all parts on a clean, non-marring surface.
Step 2
Diagram showing the attachment of backrest panel and support bars to the right leg panel using bolts and an Allen wrench.
Place the Right Leg Panel (A) liedown as shown in the picture above onto a clean, soft surface to avoid any scratches or damage to the product. With assistance from your adult partner(s): 2.1 Insert dowel on Backrest Panel (E) into housing on Right leg Panel (A). Attach the Backrest Panel (E) to the Right leg Panel (A), using 2 (two) Bolts (2) and the Allen Wrench (4) as shown above. 2.2 Insert dowel on 2 (two) Support Bar (G) into housing on Right leg Panel (A). Attach 2 (two) Support Bar (G) to the Right leg Panel (A), using 2 (two) Bolts (1) and the Allen Wrench (4) as shown above. DO NOT fully tighten the Bolts at this time.
Step 3
Diagram showing the attachment of the right middle leg panel to the assembled frame.
Stand the Chair frame up as pictured: With assistance from your adult partner(s) Attach the Right Middle Leg panel (B) to the assembled parts in Step 2 by using Bolts (1) and Bolts (2) and the Allen Wrench (4) as shown above. DO NOT fully tighten the Bolts at this time.
Step 4
Diagram showing the attachment of backrest panel and support bars to the left leg panel using bolts and an Allen wrench.
Place the Left Leg Panel (C) liedown as shown in the picture above onto a clean, soft surface to avoid any scratches or damage to the product. With assistance from your adult partner(s): 4.1 Insert dowel on Backrest Panel (E) into housing on Left Leg Panel (C). Attach the Backrest Panel (E) to the Left Leg Panel (C), using 2 (two) Bolts (2) and the Allen Wrench (4) as shown above. 4.2 Insert dowel on 2 (two) Support Bar (G) into housing on Left Leg Panel (C). Attach 2 (two) Support Bar (G) to the Left Leg Panel (C), using 2 (two) Bolts (1) and the Allen Wrench (4) as shown above. DO NOT fully tighten the Bolts at this time.
Step 5
Diagram showing the attachment of the left middle leg panel to the assembled frame.
Stand the Chair frame up as pictured: With assistance from your adult partner(s) Attach the Left Middle Leg Panel (D) to the assembled parts in Step 4 by using Bolts (1) and Bolts (2) and the Allen Wrench (4) as shown above. DO NOT fully tighten the Bolts at this time.
Step 6
Diagram showing how to connect two chair frames together.
With assistance from your adult partner(s): place 2 (two) Chair frame stand up and connect the Chairs together by using Bolts (2) and the Allen Wrench (4) as shown above. DO NOT fully tighten the Bolts at this time.
Step 7
Diagram showing the attachment of seat panels using screws and an Allen wrench.
With assistance from your adult partner(s), attach 2 (two) Seat Panel (F) to the assembled parts in step 6 using Screws (3) and the Allen Wrench (4) as shown above. DO NOT fully tighten the Screws at this time.
Step 8
Diagram showing how to adjust levellers for balance.
Turn the 3 Seater right side up. Inspect the 3 Seater and make sure all parts are adequately connected. In a sequential manner, tighten all Screws and Bolts at all joints. With assistance from your adult partner, adjust the Levelers to the desired height to avoid wobbles. CAUTION: When tightening these screws and bolts, tighten sequentially. DO NOT tighten any screw or bolt fully and then move towards the next one. This could cause the frame to warp. WARNING!! IF THE 3 Seater IS NOT STABLE, IT COULD LEAD TO DAMAGING THE PRODUCT.
Step 9
Diagram showing the placement of cushions and securing them with magic tape straps.
Place 3 (Three) Seat Cushion (H), and 2 (Two) Back Cushions (I) and Middle Back cushion (J) onto the 3 Seater. Then affix the "magic tape straps" around the 3 Seater as shown above. Your 3 Seater is ready to be used. This 3 Seater can only be used on a flat, level surface.
Questions & Answers about Proposition 65
-
What is Proposition 65?
Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals.
Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.
Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987.
-
What types of chemicals are on the Proposition 65 list?
The list contains a wide range of naturally occurring and synthetic chemicals that include additives or ingredients in pesticides, common household products, food, drugs, dyes, or solvents. Listed chemicals may also be used in manufacturing and construction, or they may be byproducts of chemical processes, such as motor vehicle exhaust.
-
What does a warning mean?
If a warning is placed on a product label or posted or distributed at a workplace, a business, or in rental housing, the business issuing the warning is aware or believes that it is exposing individuals to one or more listed chemicals.
By law, a warning must be given for listed chemicals unless the exposure is low enough to pose no significant risk of cancer or is significantly below levels observed to cause birth defects or other reproductive harm.
-
Where can I get more information on Proposition 65?
If you have specific questions on the administration or implementation of Proposition 65, you can contact OEHHA's Proposition 65 program at P65.Questions@oehha.ca.gov, or by phone at (916) 445-6900.
