Assembly Instructions

3-Seat Sofa

Advice:

• Power tools are suggested to be used during installation.
• More than one person may be required to assemble this product.
• The best advice is not tightening up any screws until the whole piece is assembled. If having difficulty aligning holes, loosen the screws already installed and readjust the armrest.
• To avoid mess-up or mismatch, please use the hardware of each box to install the furniture in the same box.

Parts List

The best advice is not tightening up any screws until the whole piece is assembled.

Assembly Steps

STEP 1: Attach panels S-G, S-H, S-I, S-B, S-E, S-F to form the base structure. Use screws V+N (x6).

STEP 2: Connect the side panels S-I and S-F to the base. Use screws V+N (x8) and nuts M.

STEP 3: Attach the back panels S-A and S-C to the frame. Use screws V+N (x6) and nuts M.

STEP 4: Secure the top frame elements. Use screws V+N (x6).

STEP 5: Attach the arms S-J and S-K. Use screws V+N (x4).

STEP 6: Install the sofa legs S-L and S-M. Use screws Z1+N (x16).

STEP 7: Place the cushions S-N and S-O. Tap cushions to allow them to fully rebound (wait 48-72 hours). Adjust the middle legs to ensure the sofa is parallel to the ground.

Single Chair

Advice:

• Power tools are suggested to be used during installation.
• More than one person may be required to assemble this product.
• The best advice is not tightening up any screws until the whole piece is assembled. If having difficulty aligning holes, loosen the screws already installed and readjust the armrest.
• To avoid mess-up or mismatch, please use the hardware of each box to install the furniture in the same box.

Parts List

The best advice is not tightening up any screws until the whole piece is assembled.

Assembly Steps

STEP 1: Attach chair back C-B to chair seat C-E. Use screws V+N (x2).

STEP 2: Attach left arm C-K to the assembled seat and back. Use screws V+N (x2).

STEP 3: Attach right arm C-J to the assembled seat and back. Use screws V+N (x2).

STEP 4: Secure the back cushion C-N. Use screws U+N (x2).

STEP 5: Place the seat cushion C-O. Tap cushions to allow them to fully rebound (wait 48-72 hours).

Ottoman

Advice:

• Power tools are suggested to be used during installation.
• More than one person may be required to assemble this product.
• The best advice is not tightening up any screws until the whole piece is assembled. If having difficulty aligning holes, loosen the screws already installed and readjust the armrest.
• To avoid mess-up or mismatch, please use the hardware of each box to install the furniture in the same box.

Parts List

The best advice is not tightening up any screws until the whole piece is assembled.

Assembly Steps

STEP 1: Attach side panels with legs O-B to the top panel O-A. Use screws V+N (x2).

STEP 2: Attach the other side panels with legs O-B. Use screws V+N (x2).

STEP 3: Attach side panels without legs O-C. Use screws V+N (x5).

STEP 4: Attach the remaining side panels without legs O-C. Use screws V+N (x5).

FINISH: Place the cushion O-D. Tap cushions to allow them to fully rebound (wait 48-72 hours).

Table

Advice:

• Power tools are suggested to be used during installation.
• More than one person may be required to assemble this product.
• The best advice is not tightening up any screws until the whole piece is assembled. If having difficulty aligning holes, loosen the screws already installed and readjust the armrest.
• To avoid mess-up or mismatch, please use the hardware of each box to install the furniture in the same box.

Parts List

The best advice is not tightening up any screws until the whole piece is assembled.

Assembly Steps

STEP 1: Attach long side panels T-D to the base. Use screws V+N (x4).

STEP 2: Attach the other long side panel T-D. Use screws V+N (x4).

STEP 3: Attach short side panels T-E and support bracket T-C. Use screws X+N (x4). Ensure the bulged rod of the support bracket faces the glass for parallel alignment with the solar lamp.

STEP 4: Attach sofa legs T-F. Use screws W (x8).

STEP 5: Place the glass top T-B. Install the solar lamp T-A.

Solar Panel User Manual

Working Principle:

The solar light operates by converting sunlight into electrical energy through the solar panel, which is then stored in the rechargeable battery to power the light. During the day, sunlight hits the solar panel, converting light energy into electrical energy, which is stored in the battery. At night, the battery releases the stored energy to the LED light, providing illumination. The solar light features a photosensitive switch that automatically turns off the light when it detects sufficient brightness in the surroundings. Conversely, when it senses dim lighting conditions, the light automatically turns on. Additionally, the product includes a power switch that allows you to manually turn off the light when illumination is not needed.

Working Time:

When exposed to 8 hours of direct sunlight each day, the light can operate continuously for up to 6 hours. The amount of sunlight converted and stored during the day determines the duration of illumination at night. This duration may vary depending on the intensity of the sunlight, the user's geographic location, weather conditions, and the season. As sunlight becomes weaker during winter, the lighting duration may be shortened. Optimal performance is achieved with direct sunlight.

Usage Notes:

• Before first use, allow the solar panel to charge in direct sunlight for 8 hours. This fully activates the rechargeable battery, which helps extend its lifespan. Long periods of disuse may cause the battery to self-discharge.
• Place the solar light in a location where it can receive direct sunlight without being blocked by other objects. Ensure there are no nearby high-intensity light sources, as they may create a false daylight environment for the solar light.
• Regularly clean the surface of the solar panel to improve the efficiency of light energy conversion.
• Turn off the main switch if the light will not be used for an extended period.
• During regular use, the switch does not need to be turned off. The solar light will automatically charge during the day and illuminate at night.
• Variations in the light sensitivity of the solar panel may result in different lighting times, which is normal.

Testing the Solar Panel's Functionality:

Daytime Testing: Cover the solar panel completely with your hand or a non-transparent object (not a light-transmitting one). Turn on the switch; the light should turn on. When the cover is removed and the solar panel is exposed to light, the light should turn off. If the light does not turn on when the panel is fully covered and the switch is on, it may indicate that the battery is not sufficiently charged and needs to be placed in sunlight for charging during the day.