Installation Instructions
Step 1: Attach Roller Slides
Visual Description: An image displays the underside of a wooden cabinet. Four small wheels are attached. A close-up inset shows a roller slide being secured to the bottom surface with screws.
Install the roller slide at the bottom of the cabinet. Ensure there are no pre-drilled holes on the bottom surface. Find a suitable position and fix the slide directly with screws. ⚙️
Step 2: Install Glasses Holders
Visual Description: A wooden vertical support is shown with multiple white pegs or holders inserted. These are designed to hold glasses.
Install the nose pads (or holders) for the glasses. ?
Step 3: Assemble Panel and Base
Visual Description: A wooden panel and a base piece are visible. A hand is using a screwdriver to attach the panel to the base with screws.
Fix the panel and the base below, one by one, using screws. ?
Step 4: Connect Bottom to Top Panels
Visual Description: The image shows the underside of the cabinet structure where a screw is being driven through a panel into a supporting wooden piece.
After the bottom panels are all fixed, they should be attached to the top panels in sequence. ⬆️
Step 5: Attach Door Handle
Visual Description: The side of a cabinet door is shown. A wooden handle is being attached to the door, with a screw being driven from the inside using a screwdriver.
The door handle of the cabinet is fixed. Assembly is now complete. ✔️
