SHOE STORAGE CABINET

Introduction

Thank you for purchasing this Shoe Storage Cabinet. Please read these installation instructions carefully before assembly to ensure a smooth process. If you encounter any missing parts or damaged goods, please contact customer support for assistance.

Parts List

Please verify all parts and accessories are present before beginning assembly.

Assembly Instructions

1. Step 1: Attach Left Side Panel

   Snap the left side panel (B) to the front frame (A).

   Diagram Description: Shows part B being connected to part A.

2. Step 2: Attach Right Side Panel

   Install the right side panel (C) to the front frame in the same manner as the left side.

   Diagram Description: Shows part C being connected to the assembly from Step 1.

3. Step 3: Attach Back Panel

   Attach the back panel (D) to the side panels using four (4) M5*10 self-tapping screws.

   Diagram Description: Shows part D being attached to the rear of the cabinet frame, secured with screws.

4. Step 4: Attach Base Plate

   Position the base plate (E) face down. Secure it all around to the cabinet frame using eight (8) M5*10 self-tapping screws.

   Diagram Description: Shows part E being attached to the bottom of the cabinet frame, secured with screws.

5. Step 5: Attach Top Plate

   Snap the top plate (F) onto the top of the shoe cabinet. Secure it using ten (10) M5*10 self-tapping screws. Pay attention to the orientation of the top plate.

   Diagram Description: Shows part F being placed on top of the cabinet and secured with screws.

6. Step 6: Install Triangular Reinforcements

   Align the triangular reinforcements (L) with the mounting holes in the back and top panels. Attach them using four (4) M5*10 self-tapping screws.

   Diagram Description: Shows part L being attached to the interior corners of the cabinet, connecting the back and top panels.

7. Step 7: Assemble Drawer Frame

   Align the drawer side panels (H) with the holes in the drawer front panel (I). Ensure proper alignment of the shaft holes. Secure them together using six (6) M4*10 handle screws.

   Diagram Description: Shows parts H and I being joined to form a drawer frame, secured with screws.

8. Step 8: Attach Drawer Baffle

   Bend the drawer baffle (J) so that the smooth surface faces inwards. Attach it to the drawer side panels and the drawer front panel using eleven (11) M4*10 handle screws.

   Diagram Description: Shows part J being attached to the assembled drawer frame, secured with screws.

9. Step 9: Insert Drawer Partition and Stopper

   Insert the drawer partition (K) into the drawer. Adjust it to the correct position and secure it using four (4) M6*10 plastic expansion plugs. Extend the stopper outward and attach the shock absorber sleeve.

   Diagram Description: Shows part K being inserted into the drawer, secured with plugs. Also shows a stopper mechanism and shock absorber sleeve being attached. Note: "Do not fully bend the stopper here" is a cautionary note.

10. Step 10: Place Washers

    Place four (4) M8*12 T-washers into the attachment holes in the side frames of the main cabinet.

    Diagram Description: Shows washers being inserted into specific holes on the side panels of the main cabinet.

11. Step 11: Fasten Drawer Front

    Fasten the drawer front panel using four (4) M6*25 flat head Phillips screws from the inside of the drawer into the nuts in the attachment holes. With the drawer partially open, position the stopper in the shoe cabinet and bend the stopper along with the shock absorber sleeve to a 90° angle.

    Diagram Description: Shows screws being inserted from inside the drawer to attach the front panel. Also shows the drawer stopper and shock absorber sleeve being adjusted.

12. Step 12: Install Buffers

    Place the two (2) buffers into the designated holes in the front frame of the cabinet.

    Diagram Description: Shows buffers being inserted into holes on the front of the cabinet.

Customer Support & Feedback

We value your feedback. If you have any questions or require assistance, please contact us via email. Sharing your experience by leaving a product review online can help other customers make informed decisions.