ASSEMBLY INSTRUCTION
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
- Check you have all the components and tools listed on the following pages.
- Remove all fittings from the plastic bags and separate them into their groups.
- Keep children and animals away from the work area, small parts could choke if swallowed.
- Make sure you have enough space to layout the parts before starting.
- During assembly do not stand or put weight on the product, this could cause damage.
- Assemble the item as close to its final position (in the same room) as possible.
- Assemble on a soft level surface to avoid damaging the unit or your floor.
- Parts of the assembly will be easier with 2 people.
- To reduce the likelihood of damaging your product, please ensure that your power drill is set on a low torque setting.
Care and maintenance
- Only clean using a damp cloth and mild detergent, do not use bleach or abrasive cleaners.
- From time to time check that there are no loose screws on this unit.
- This product should not be discarded with household waste. Take to your local authority waste disposal centre.
Handy Hints
- Assemble all parts and bolts loosely during assembly, only once the product is complete should you fully tighten the bolts.
- Regularly check and ensure that all bolts and fittings are tightened properly.
WARNING: To help prevent overturning
Please follow these instructions to help prevent product toppling over:
- Use the anti-tip strap or wall fixing method provided (if applicable).
- Do not allow children to climb or hang on the furniture.
- Do not open more than one drawer at a time.
- Do not place heavy items in the top drawers.
- Do not place heavy items on top of the furniture, unless the furniture has been designed for this purpose.
Please note that only the anti-tip strap is provided. You will need to provide wall plugs and screws applicable for your wall type.
⚠ Warning: Excessive weight hazard! Use two or more people to move, assemble, or install cabinets to avoid back injury. Do not leave children unattended near cabinets, high risk of tipping if cabinets are installed incorrectly: securely attach cabinets to the wall to avoid serious injury.
Visual comparison showing incorrect lifting (one person struggling, marked with a cross ❌) versus correct lifting (two people lifting safely, marked with a checkmark ✔️).
PRODUCT PARTS
| Part Code | Description | Quantity |
|---|---|---|
| LSP | Left Side Panel | 1pc(s) |
| RSP | Right Side Panel | 1pc(s) |
| DE | Deck | 1pc(s) |
| FCP | Connecting Panel | 5pc(s) |
| DF | Drawer Face | 3pc(s) |
| BP | Back Panel | 1pc(s) |
| LD | Left Drawer Side | 4pc(s) |
| RD | Right Drawer Side | 4pc(s) |
| DDF | Drawer Face | 1pc(s) |
| BD | Drawer Back | 4pc(s) |
| DD | Drawer Bottom | 4pc(s) |
| DCP | Connecting Panel | 2pc(s) |
Hardware
| Identifier | Description | Quantity |
|---|---|---|
| a | Cam Bolt | 50 |
| b | Cam Lock | 18 |
| d | Screw Φ4*16 | 60 |
| f | Dowel | 34 |
| g | Cam Bolt | 4 |
| h | Drawer Slide Screw | 8 |
| sb | Cam Lock | 32 |
Recommended Tools
- Screwdriver
- Drill
- Rubber Mallet
Assembly Steps
Step 1
Attach the Left Side Panel (LSP) and Right Side Panel (RSP) to the base structure. Insert 14 cam bolts (a) into the designated holes and 6 dowels (f) into their respective holes. Secure by tightening the cam bolts.
Visual shows two side panels being prepared with cam bolts and dowels before attachment.
Step 2
Attach drawer slides to the Left Side Panel (LSP). Insert 9 screws (d) and 3 screws (h) to secure the slides. Arrows indicate the direction of attachment.
Visual shows drawer slides being attached to the inner side of the LSP panel using screws d and h.
Step 3
Attach drawer slides to the Right Side Panel (RSP). Insert 9 screws (d) and 3 screws (h) to secure the slides. Arrows indicate the direction of attachment.
Visual shows drawer slides being attached to the inner side of the RSP panel using screws d and h.
Step 4
Attach the Deck (DE) to the base structure. Insert 4 cam bolts (a) into the designated holes and secure by tightening them.
Visual shows the Deck panel being attached to the base using cam bolts.
Step 5
Prepare Connecting Panels (FCP) and Connecting Panels (DCP). Insert 28 dowels (f) into the designated holes on 5 FCP panels and 2 DCP panels.
Visual shows dowels being inserted into multiple connecting panels.
Step 6
Attach the prepared Connecting Panels (FCP and DCP) to the base structure (LSP). Ensure correct alignment.
Visual shows vertical connecting panels being attached to the base panel.
Step 7
Secure the vertical panels (FCP and DCP) to the base structure (LSP) using 7 cam locks (b). Insert cam locks into the holes and turn clockwise to tighten.
Visual shows cam locks being inserted and turned to secure vertical panels to the base.
Step 8
Attach the Back Panel (BP) to the assembled cabinet frame. Slide the back panel into the grooves.
Visual shows the back panel being slid into place on the cabinet frame.
Step 9
Prepare drawer slides for insertion into the cabinet. For the left side, attach the inner slide component (ha) to the cabinet structure (LSP). Repeat for 3 drawers.
Visual shows the separation of drawer slide components and attachment of the inner slide (ha) to the cabinet's left side.
Step 10
Prepare drawer slides for insertion into the cabinet. For the right side, attach the inner slide component (ha) to the cabinet structure (RSP). Repeat for 3 drawers.
Visual shows the separation of drawer slide components and attachment of the inner slide (ha) to the cabinet's right side.
Step 11
Continue assembling the cabinet frame by attaching the Back Panel (BP) and ensuring all vertical panels (FCP) and side panels (LSP, RSP) are correctly positioned.
Visual shows the back panel being attached and the overall cabinet structure taking shape.
Step 12
Secure the cabinet frame using 7 cam locks (b). Insert cam locks into the designated holes on the Right Side Panel (RSP) and turn clockwise to tighten.
Visual shows cam locks being used to secure the right side of the cabinet.
Step 13
Attach the Deck (DE) to the top of the cabinet frame. Slide it into place and ensure it aligns with the side panels (LSP, RSP) and back panel (BP).
Visual shows the top deck panel being attached to the cabinet.
Step 14
Secure the Deck (DE) to the cabinet frame using 4 cam locks (b). Insert cam locks into the designated holes on the Right Side Panel (RSP) and turn clockwise to tighten.
Visual shows cam locks being used to secure the top deck panel to the right side of the cabinet.
Step 15
Attach cam bolts (d x 12) and cam bolts (g x 4) to the drawer front (DE). Insert cam locks (d) and cam locks (g) into the corresponding holes on the side panels (FCP, DCP) and turn clockwise to secure.
Visual shows cam bolts being inserted into a drawer front and cam locks being used to connect it to side panels.
Step 16
Assemble the drawer slides. Attach the outer slide component (hb) to the inner slide component (ha) using 2 screws (h). Repeat for all drawer slides.
Visual shows the assembly of drawer slide components.
Step 17
Assemble the drawer sides (LD, RD) and drawer front (DF). Insert 32 cam bolts (a) into the drawer front and secure using cam locks (a). Repeat for 4 drawer assemblies.
Visual shows drawer sides being attached to a drawer front using cam bolts and cam locks.
Step 18
Attach the drawer back (BD) to the drawer sides (LD, RD) using 8 cam locks (sb). Insert cam locks and turn clockwise to secure. Repeat for 4 drawer assemblies.
Visual shows drawer back being attached to drawer sides using cam locks.
Step 19
Slide the drawer bottom (DD) into the grooves of the assembled drawer sides and back. Attach the drawer front (DF) to the drawer sides and bottom, securing with cam locks (sb).
Visual shows the drawer bottom being slid into place and the drawer front being attached to the drawer box.
Step 20
Assemble the drawer box by attaching the drawer back (BD) to the drawer sides (LD, RD) using 8 cam locks (sb). Ensure the drawer bottom (DD) is correctly positioned within the grooves. Repeat for 4 drawer assemblies.
Visual shows the drawer back being attached to the drawer sides, with the drawer bottom in place.
Step 21
Assemble the drawer front (DF) to the drawer box. Ensure the drawer bottom (DD) is correctly seated. Secure using cam locks (sb). Repeat for 4 drawer assemblies.
Visual shows the drawer front being attached to the drawer box using cam locks.
Step 22
Secure the drawer assembly using 16 cam locks (sb). Insert cam locks into the designated holes and turn clockwise to tighten. Repeat for 4 drawer assemblies.
Visual shows cam locks being used to secure the entire drawer assembly.
Step 23
Attach the inner drawer slides (ha) to the assembled drawer boxes using 8 screws (d). Ensure correct orientation. Repeat for 4 drawer assemblies.
Visual shows inner drawer slides being screwed onto the sides of the assembled drawer boxes.
Step 24
Shows completed drawer assemblies: 3 standard drawer fronts (DF) and 1 wider drawer front (DDF).
Visual displays three completed standard drawers and one completed wider drawer.
Step 25
Insert the assembled drawers into the cabinet frame. Arrows indicate the direction of insertion.
Visual shows a drawer being slid into the cabinet on its runners.
Step 26
Insert the assembled drawers into the cabinet frame. Arrows indicate the direction of insertion.
Visual shows a drawer being slid into the cabinet on its runners.
Step 27
Insert the assembled drawers into the cabinet frame. Arrows indicate the direction of insertion.
Visual shows a drawer being slid into the cabinet on its runners.
Step 28
Insert the assembled drawers into the cabinet frame. Arrows indicate the direction of insertion.
Visual shows a drawer being slid into the cabinet on its runners.
Step 29
Final view of the assembled cabinet with all drawers installed.
Visual shows the completed cabinet with all drawers in place.
