Important Information
Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.
AVOID SCRATCHES! In order to avoid scratching, this furniture should be assembled on a soft layer, such as a rug.
IMPROVE EFFICIENCY! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.
ANTI-TOPPLE WARNING! Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.
IMPORTANT! It is important that any product which is assembled using any kind of screw is re-tightened 2 weeks after assembly, and once every 3 months to assure stability throughout the lifespan of the product. For regular maintenance and cleaning of the product, for the frame, please use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use too much force when installing, because the board is easy to break.
Tools Required
Please prepare the following tools:
- Pencil
- Drill
- Screwdriver
- Hammer
- Allen Wrench
Hardware List
When installing, please carefully confirm whether each screw corresponds to the manual; accessories with similar shapes can be distinguished by size.
- A x 36: M5 x 42 mm
- B x 36: Ø15 x 12 mm
- C x 24: Ø8 x 40 mm
- D x 72: M3.5 x 12 mm
- E x 40: M3.5 x 14 mm
- F x 8: M3.5 x 14 mm
- G x 8: M8 x 40 mm
- H x 12: DW
- I x 4: 220-96
- J x 6: (No specific dimensions provided)
- K x 12: M4 x 18 mm
- L x 12: Ø12 x Ø4 x 1.0
- M x 25: 1.5 x 15 mm
- N x 25: 15 x 10
- O x 20: BBK
- P x 2: SETS
- #5 x 1: (No specific dimensions provided)
Assembly Steps
ASSEMBLED BY 2 ADULTS
Step 1: Fix leg part 15 to panel 5 using screw(G) as shown. (Uses 4x G screws, M8 x 40 mm)
Step 2: Screw eccentric rod(A) into panel 5 as shown. (Uses 8x A screws, M5 x 42 mm)
Step 3: Screw eccentric rod(A) into panel 8 as shown. Connect panel 8 to panel 10, add cam lock(B) into panel 10 and turn clockwise to tighten as shown. (Uses 8x A screws, M5 x 42 mm; 4x B cam locks, Ø15 x 12 mm)
Step 4: Attach panel 5 to panel 8 using wooden dowel(C), add cam lock(B) into panel 8 and turn clockwise to tighten as shown. (Uses 4x C dowels, Ø8 x 40 mm; 4x B cam locks, Ø15 x 12 mm)
Step 5: Screw eccentric rod(A) into panel 6 and 7 at first. Fix leg part 15 to panel 6 using screw(G) as shown. Attach panel 7 to panel 6 using wooden dowel(C), add cam lock(B) into panel 7 and turn clockwise to tighten as shown. (Uses 4x A screws, M5 x 42 mm; 2x G screws, M8 x 40 mm; 2x C dowels, Ø8 x 40 mm; 2x B cam locks, Ø15 x 12 mm)
Step 6: Screw eccentric rod(A) into panel 4 and 7 at first. Fix leg part 15 to panel 4 using screw(G) as shown. Attach panel 7 to panel 4 using wooden dowel(C), add cam lock(B) into panel 7 and turn clockwise to tighten as shown. (Uses 4x A screws, M5 x 42 mm; 2x G screws, M8 x 40 mm; 2x C dowels, Ø8 x 40 mm; 2x B cam locks, Ø15 x 12 mm)
Step 7: Connect the two components with panel 9 and 8 using wooden dowel(C), add cam lock(B) into panel 9, 4, 6 and turn clockwise to tighten as shown. (Uses 12x B cam locks, Ø15 x 12 mm; 4x C dowels, Ø8 x 40 mm)
Step 8: Fix part(I) to panel 4, 5 and 6 with screw(E) as shown. (Uses 16x E screws, M3.5 x 14 mm; 4x I parts, 220-96)
Step 9: Insert back panel 13 and 14 along available grooves at first. Fix back panels to the item using screw(F) and knock wooden dowel(C) into panel 7 and 8 as shown. (Uses 8x C dowels, Ø8 x 40 mm; 8x F screws, M3.5 x 14 mm)
Step 10: Screw eccentric rod(A) into panel 1, 2 and 3 as shown. Knock wooden dowel(C) into panel 1 and 3 as shown. (Uses 12x A screws, M5 x 42 mm; 4x C dowels, Ø8 x 40 mm)
Step 11: Attach panel 2 to panel 8 at first. Connect panel 1 and 3 to panel 2, then attach to panel 7 as shown.
Step 12: Make sure positions 1, 2, and 3 are correct before locking B. Add cam lock(B) into panel 7, 1, 8 and 3, and turn clockwise to tighten as shown. (Uses 12x B cam locks, Ø15 x 12 mm)
Step 13: Insert buckle(O) into back slots and fix with screw(E) as shown. Fix iron sheet part(N) to the gaps using nail(M) as shown. (Uses 20x E screws, M3.5 x 14 mm; 20x M nails, 1.5 x 15 mm; 20x N parts, 15 x 10; 20x O buckles, BBK)
Step 14: Fix hinge(H) to panel 11 with screw(D), fix handle(J) with washer(L) and screw(K) as shown. Attach door panel 11 to panel 7 and 8 by fixing hinge with screw(D) as shown. (Uses 48x D screws, M3.5 x 12 mm; 8x H hinges, DW; 4x J handles; 8x K screws, M4 x 18 mm; 8x L washers, Ø12 x Ø4 x 1.0)
Step 15: Fix hinge(H) to panel 12 with screw(D), fix handle(J) with washer(L) and screw(K) as shown. Attach door panel 12 to panel 8 by fixing hinge with screw(D) as shown. (Uses 24x D screws, M3.5 x 12 mm; 4x H hinges, DW; 2x J handles; 4x K screws, M4 x 18 mm; 4x L washers, Ø12 x Ø4 x 1.0)
Anti-Tipping Device Installation
Install anti-tipping device as shown. (Uses 4x E screws, M3.5 x 14 mm; 2x P sets)
Door Alignment
If doors are still not aligned, if the hinges are properly correctly, please watch the video. The diagrams illustrate hinge adjustment for vertical, horizontal, and depth alignment using screws on the hinges.
Warranty
WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, please call us. Provide your purchase order number and details of the problem for a replacement part. We will arrange within 48 hours. If out of stock, we will reply with a shipping date.
- The product must be used in accordance with the instructions provided.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty.
- Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
- After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
Returns
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
- If you have purchased and have simply changed your mind, follow the retailer's instructions for returns.
DEFECTIVE ITEMS
- If your item is defective in any way, i.e. it doesn't work but you can't identify why, in the first instance, please call us.
DAMAGED ITEMS
If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardise your chances of making a claim, and you may not receive a credit for the return.
