Latitude Run Rotating Bookcase Assembly Instructions

Parts List

• B4: Screw
• A16: Metal Bracket
• A1: Screw
• KO: Connector/Dowel
• B0: Screw
• J15: Caster Wheel
• Part 1: Top Circular Shelf
• Part 2: Middle Circular Shelf
• Part 3: Bottom Circular Base (for column)
• Part 4: Square Base with Rotating Mechanism
• Part 5: Vertical Shelf Panel (with slot)
• Part 6: Vertical Shelf Panel (solid)
• Part 7: Vertical Shelf Panel (with slot)
• Part 8: Base Support Piece
• Part 9: Base Side Panel
• Part 10: Base Side Panel
• Part 11: Base Support Piece

Assembly Instructions

Step 1: Prepare the Main Base

Take the square base (Part 4). This base contains the rotating mechanism. Ensure it is oriented correctly, with the text "Impervious to holes in the back" facing the rear. Align all four sides of the rotating mechanism and secure it by turning the screws (A1).

Step 2: Attach Base Side Panels

Attach the side panels (Part 9 and Part 10) to the square base (Part 4). Note the indication "Two impermeable holes on this side". Use screws (B4) to fasten these panels.

Step 3: Install Base Supports and Caster

Attach the base support pieces (Part 11, KO, B0) to the assembled base. Install the caster wheel (J15) as shown.

Step 4: Assemble the Rotating Core - Initial Structure

Begin assembling the central rotating core. Take two vertical shelf panels (Part 5 and Part 7), which have slots. Slot them together to form a cross shape. This is referred to as the "Opening Cross".

Step 5: Assemble the Rotating Core - Add Shelves

Continue building the rotating core. Insert the solid vertical shelf panel (Part 6) into the structure. The text "Install the remaining shelves in the same way" indicates this process is repeated for all vertical panels.

Step 6: Assemble the Rotating Core - Attach Top Shelf

Attach the top circular shelf (Part 1) to the assembled rotating core. Use screws (B4). A caution is provided: "Screw in the hole before tightening or it will crack", suggesting careful alignment is needed.

Step 7: Prepare the Column Base Structure

Start assembling the base structure for the rotating column itself. Take a base piece. Dimensions "short" (短) and "long" (长) are indicated. Part KO is shown and should be "Installed on the long side".

Step 8: Attach Column Base Supports

Attach a support piece (Part 11) to the column base structure prepared in the previous step.

Step 9: Add More Column Base Supports

Attach additional support pieces (Part 8 and Part 11) to the column base structure. Use screws (B4) for fastening.

Step 10: Attach Column Base Brackets

Fasten the metal brackets (A16) to the top surface of the column base structure.

Step 11: Attach Column Bottom Base and Caster

Attach the bottom circular base (Part 3) to the column structure. Install a caster wheel (J15) onto this base. Use screws (B4).

Step 12: Integrate Rotating Core into Column

Place the assembled rotating core (from Steps 4-6) into the column structure (built in Steps 7-11). Use screws (B4) to secure it. The diagram shows the core being integrated.

Step 13: Continue Column Assembly

Continue attaching the vertical panels and shelves to build up the rotating column. Use screws (B4) as indicated.

Step 14: Further Column Assembly

Continue the assembly process for the rotating column, ensuring all parts are securely fastened with screws (B4).

Step 15: Attach Final Top Shelf

Attach the final top circular shelf (Part 1) to the top of the assembled rotating column. Use screws (B4).

Your Latitude Run Rotating Bookcase is now assembled.