Tunturi RC20 Pro Power Rack - Dip Horn

Welcome

Welcome to the world of Tunturi! Thank you for purchasing this piece of Tunturi equipment. Tunturi offers a wide range of home fitness equipment, including crosstrainers, treadmills, exercise bikes, rowers, strength benches and multi stations. The Tunturi equipment is suitable for the entire family, no matter what fitness level. For more information, please visit our website www.tunturi.com.

Important Safety Instructions

The RC20 Pro Power Rack - Dip Horn is an accessory for the RC20 Cross Fit Rack-Base Rack and cannot be used as a stand-alone trainer or station. For safety and warranty information, please refer to the RC20 Cross Fit Rack-Base Rack manual. The Owner's Manual is an essential part of your training equipment; read all instructions in this manual before you start using this appliance. Always follow safety precautions.

Important Assembly Information

Before You Start

We recommend using two adjustable wrenches (not included) for assembly. If you have metric-sized wrenches of the correct size, that is also fine. It is strongly recommended that this equipment is assembled by two or more people to avoid possible injury.

Ensure carriage bolts are inserted through the SQUARE holes on components that need to be assembled. Attach washers only to the end of the carriage bolt. Use Allen bolts or hex bolts inserted through the ROUND hole on components that need to be assembled. Always wait until all bolts are assembled onto the bench before tightening the bolts.

Description of Illustration A

The illustrations show the correct order for assembling the trainer. Part numbers shown in the assembly steps correspond to spare part drawings found in the online full version user manual.

WARNING: Assemble the equipment in the given order.

Usage

Adjusting the Dip Horn

Fig. Assembly step #1 & #2: The suitable height for the Dip Horn is at the height where you feel comfortable doing your workout.

To adjust the Dip Horn:

• Pull out the magnetic pin and unscrew the 2 plum bolts (star-shaped bolts) to remove them.
• Pull the Dip Horn 90 degrees upwards and pull it out of the upright tube.
• Place the Dip Horn in your required position on the upright tube, and turn it back in a vertical position again.
• Fit the 2 plum bolts and fit the magnetic pin back again to secure the fixture.

NOTE: It is recommended to locate the Dip Horn at a location where it feels comfortable to use.

Cleaning and Maintenance

Inspect and tighten all parts before using the equipment. The equipment can be cleaned using a damp cloth and mild non-abrasive detergent. DO NOT use solvents. Examine the equipment regularly for signs of damages or wear. Replace any defective components immediately and/or keep the equipment out of use until repair. Failure to examine regularly may affect the safety level of the equipment.

Defects and Malfunctions

Despite continuous quality control, defects and malfunctions caused by individual parts can occur in the equipment. In most cases, it will be sufficient to replace the defective part. If the equipment does not function properly, immediately contact the dealer. Provide the model number and the serial number of the equipment to the dealer. State the nature of the problem, conditions of use, and purchase date.

Additional Information

Packaging Disposal

Government guidelines ask that we reduce the amount of waste material disposed of in land fill sites. We therefore ask that you dispose of all packaging waste responsibly at public recycling centres.

End of Life Disposal

We at Tunturi hope you enjoy many years of enjoyable use from your fitness trainer. However, a time will come when your fitness trainer will come to the end of its useful life. Under 'European WEEE Legislation', you are responsible for the appropriate disposal of your fitness trainer to a recognised public collection facility.

Disclaimer

© 2020 Tunturi New Fitness BV. All rights reserved. The product and the manual are subject to change. Specifications can be changed without further notice. Check our website for the latest user manual version.