Tunturi Platinum Wide Chest Press - User Manual ⚙️
Model: 25PVP14000
Important Safety Instructions
This manual is an essential part of your training equipment. Please read all instructions in this manual before you start using this equipment. The following precautions must always be followed:
Important Safety Notice
- Keep children and pets away from the equipment at all times.
- DO NOT leave children unattended in the same room with the equipment.
- Only one person at a time should use the equipment.
- If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
- Position the equipment on a clear, levelled surface. DO NOT use the equipment near water or outdoors.
- Keep hands away from all moving parts.
- Always wear appropriate workout clothing when exercising. DO NOT wear robes or other clothing that could become caught in the equipment. Running or aerobic shoes are also required when using the equipment.
- Use the equipment only for its intended use as described in this manual. DO NOT use attachments not recommended by the manufacturer.
- Do not place any sharp object around the equipment.
- Disabled persons should not use the equipment.
- Before using the equipment to exercise, always do stretching exercises to properly warm up.
- Never operate the equipment if the equipment is not functioning properly.
Warning
Before beginning any exercise program, consult your physician. This is especially important for individuals over the age of 35 or persons with pre-existing health problems. Read all instructions before using any fitness equipment. Tunturi New fitness bv. assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
Important Assembly Information
Before you start:
- We recommend using two adjustable wrenches to assemble your product. If you have metric sized wrenches in the correct size, this is fine too.
- NOTE: Suitable (adjustable) wrenches are NOT provided with the product, neither included in the assembly kit.
- It is strongly recommended that this equipment is assembled by two or more people to avoid possible injury.
Description Illustration B
This illustration shows what components and parts you should find when un-boxing your product.
- NOTE: Pay attention when unpacking; small parts can be hidden/packed in hollow spaces used as the product protective materials. If a part is missing, contact your dealer.
Description Illustration C
This illustration shows the hardware kit that comes with your product. The hardware kit contains bolts, washers, screws, nuts etc. and the required tools to properly fit your trainer.
Description Illustration D
These illustrations show you in the correct following order how to assembly your trainer best.
- WARNING: Assemble the equipment in the given order.
- WARNING: Carry and move the equipment with at least two persons.
- CAUTION: Place the equipment on a firm, level surface.
- CAUTION: Place the equipment on a protective base to prevent damage to the floor surface.
- Refer to the illustrations for the correct assembly of the equipment.
Free Area (Fig. D-0)
Adequate space is a prerequisite for use. The free area should be no less than 100 cm greater than the *training area in the directions from which the equipment is accessed. The free area must also include the area for emergency dismount. Where equipment is positioned adjacent to each other, the value of the free area may be shared.
Usage
Weight plate storage bars
- When using the weight-plate storage bars for weight plates, do make sure to use sufficient locking supports to secure your weight plates at all times.
- When storing weight-plates on the storage bars, do make sure you divide the weigh-plates evenly over the left and right side.
- Never exceed the maximum weight capacity of the weight plate storage bar.
Exercise Guidelines
Building Muscle and Gaining Weight
Unlike aerobic exercise, which emphasizes endurance training, anaerobic exercise focuses on strength training. A gradual weight gain can occur while building the size and strength of muscles. While developing muscle mass, your body adapts to the stress placed upon it. You can modify your diet to include foods such as meat, fish and vegetables. These foods help muscles recover and replenish important nutrients after a strenuous workout.
Muscle Strength and Endurance
To achieve the greatest benefit from exercise, it is important to develop an exercise program that allows you to work all of the major muscle groups equally.
To increase muscle strength; follow this principle: Increasing resistance and maintaining the number of repetitions of an exercise results in increased muscle strength. To tone your body, follow the principle: Decreasing resistance plus increasing the number of repetitions of an exercise results in increased body tone.
Once you feel comfortable with an exercise, you can change the resistance, the number of repetitions, or the speed at which you do the exercise. It is not necessary to change all three variables. For example, let's say that you are training at 10 kg. and performing the exercise 10 times in 3 minutes. When this becomes too easy, you may decide to move up lifting 12 kg. for the same number of repetitions in the same amount of time. Lifting more weights fewer times most often develops muscle strength. To gain both muscle strength and endurance, it is recommended that you perform each exercise 15 to 20 reps per set.
Training Intensity
How hard you begin to train depends on your overall level of fitness. The soreness you experienced can be lessened by decreasing the load you place on your muscles and by performing fewer sets. To avoid injury, you should gradually work into an exercise program and set the load to your individual fitness level. The load should increase as your fitness level increases. Muscle soreness is common, especially when you first start exercising. If you are painfully sore for a long time, it may be time to change your program. Eventually, your muscle system will become accustomed to the stress and strain placed on it.
Beginning a Strength Building Program
Warming Up
To begin strength training, it is important to stretch and perform light exercise for 5 to 10 minutes. This helps prepare the body for more strenuous exercise by increasing circulation, raising your body temperature and developing more oxygen to your muscles.
Workout
Each workout, keep in mind that muscle soreness that lasts for a long period is not desirable and may mean that injury has occurred.
Cool Down
At the end of each workout, perform slow stretching exercises for 5 to 10 minutes. Ease into each stretch only going as far as you can. This stage allows your muscles to wind down after training.
To provide a total workout program, it is also recommended that 2 to 3 days of aerobic exercise is performed in addition to the strength training.
Drinking Water
For the body to function properly, it must be properly hydrated. If you are exercising, you should increase your fluid intake. The reason for this is that the water you take in will leave your system through the sweating mechanism that cools your body during exercise. The water you lose through exercise must be replaced so that the muscles can recover properly.
Rest Day
Although you may not feel like doing it, taking a rest day at least once a week is important because it gives your body a chance to heal itself. Continuously working your muscles will result in overtraining, which will not benefit in the long run.
Cleaning and Maintenance
- Lubricate moving parts with WD-40 or light oil periodically.
- Inspect and tighten all parts before using the equipment.
- The equipment can be cleaned using a damp cloth and mild non-abrasive detergent. DO NOT use solvents.
- Examine the equipment regularly for signs of damages or wear.
- Replace any defective components immediately and/or keep the equipment out of use until repair.
- Failure to examine regularly may affect the safety level of the equipment.
Defects and Malfunctions
Despite continuous quality control, defects and malfunctions caused by individual parts can occur in the equipment. In most cases, it will be sufficient to replace the defective part.
- If the equipment does not function properly, immediately contact the dealer.
- Provide the model number and the serial number of the equipment to the dealer. State the nature of the problem, conditions of use, and purchase date.
- Further contact information or user manuals in other languages can be found on our website.
Warranty
Tunturi Purchaser's Warranty
The consumer is entitled to the applicable legal rights stated in the national legislation concerning the commerce of consumer goods. This warranty does not restrict these rights. The Purchaser's Warranty is only valid if the item is used in an environment approved by Tunturi New Fitness BV, and is maintained as instructed for that particular equipment. The product-specific approved environment and maintenance instructions are stated in the "user manual" of the product. The "user manual" can be downloaded from our website: http://manuals.tunturi.com.
Limited Warranty
Tunturi New Fitness warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the frame and one year on all other parts and components from the date of purchase. This warranty extends only to the original purchaser. Tunturi New Fitness's obligation under this Warranty is limited to replacing damaged or faulty parts at Tunturi New Fitness's option.
All returns must be pre-authorised by Tunturi New Fitness. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage, purchasers own repairs or for products used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorised by Tunturi New Fitness.
Tunturi New Fitness is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other consequential damages or whatsoever natures.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein. Your statutory rights are not affected.
Disclaimer
© 2025 Tunturi New Fitness BV. All rights reserved. The product and the manual are subject to change. Specifications can be changed without further notice. Check our website for the latest user manual version.
Parts and Hardware Summary
The manual includes detailed diagrams illustrating all components and parts (labeled 1-24) and hardware (labeled A-P) used in the assembly process. These visual aids guide the user through the construction of the equipment.
Hardware List
Label | Description |
---|---|
A | M10*125 Hex socket flat round head bolt |
B | M10*75 Hex bolt with flat round cross-section, cylinder head bolt |
C | M12*130 Hex bolt with flat round cross-section, cylinder head bolt |
D | M6*10 Hex bolt with flat round cross-section, cylinder head bolt |
E | M10*20 Hex bolt with flat round cross-section, cylinder head bolt |
F | M10*70 Hex bolt with flat round head, cylinder head bolt |
G | M10 Lock nut |
H | M12 Flat washer |
I | M10 Flat washer |
J | M8 Flat washer |
K | 12 Lock nut |
L | M10*60 Hex socket flat round head bolt |
M | M10*65 Hex head with flat round thread, cylinder head bolt |
N | M10*30 Hex socket flat round head bolt |
O | M10*25 Hex head with flat round thread, cylinder head bolt |
P | M8*16 Hex bolt with flat round cross-section, cylinder head bolt |
Assembly diagrams (D-1 to D-5) detail the step-by-step process of putting the machine together using these parts.