Tunturi RC20 Pro Power Rack - Rope Trainer Accessory
SKU: 18TSRC2020
Introduction
Welcome to the world of Tunturi! Thank you for purchasing this Tunturi equipment. The Tunturi RC20 Pro Power Rack - Rope Trainer is an accessory for the Tunturi RC20 Pro Power Rack - Base Rack and cannot be used as a stand-alone trainer or station. For safety and warranty information, please refer to the main Tunturi RC20 Pro Power Rack - Base Rack manual. You can download the user manual for the RC20 Cross Fit Rack-Base Rack from the Tunturi website at any time.
⚠️ IMPORTANT SAFETY INSTRUCTIONS: Please read this user manual carefully prior to using this product. This manual is an essential part of your training equipment; read all instructions before use. Always follow these precautions:
Important Assembly Information
Before You Start
It is recommended to use two adjustable wrenches to assemble the product. Metric wrenches of the correct size will also suffice.
- ? NOTE: Suitable adjustable wrenches are NOT provided with the product or included in the assembly kit.
- ⚠️ WARNING: It is strongly recommended that this equipment is assembled by two or more people to avoid possible injury.
- Always wait until all bolts are assembled onto the rack before tightening them.
Description of Illustration A
The illustrations show the correct order for assembling your trainer.
- ? NOTE: Part numbers shown in the assembly steps correspond to the spare part drawing found in the online full version user manual.
⚠️ WARNING: Assemble the equipment in the indicated order.
Parts List (Diagram A-01)
| NE. | Description | Specification | Quantity |
|---|---|---|---|
| 1 | Rope Pulley Assembly (Lower) | 1 | |
| 2 | Rope Pulley Assembly (Upper) | 1 | |
| 3 | Support Bracket | 1 | |
| 4 | Round Pin | 2 | |
| 5 | Locking Pin | 4 | |
| 7 | Hex Socket Screw | M12x110 | 2 |
| 8 | Hex Socket Screw | M12x20 | 2 |
| 9 | Lock Nut | M12 | 4 |
| 10 | Washer | M12 | 6 |
| 11 | Large Washer | M12 | 2 |
Parts List (Diagram A-02)
| NE. | Description | Specification | Quantity |
|---|---|---|---|
| 6 | Rope (not included) | Max. Ø50 mm | 1 |
Cleaning and Maintenance
Inspect and tighten all parts before using the equipment. The equipment can be cleaned using a damp cloth and mild, non-abrasive detergent. DO NOT use solvents. Examine the equipment regularly for signs of damages or wear. Replace any defective components immediately and/or keep the equipment out of use until repair. Failure to examine regularly may affect the safety level of the equipment. ⚙️
Defects and Malfunctions
Despite continuous quality control, defects and malfunctions caused by individual parts can occur. In most cases, it will be sufficient to replace the defective part. If the equipment does not function properly, immediately contact the dealer. Provide the model number and the serial number of the equipment to the dealer. State the nature of the problem, conditions of use, and purchase date. ❓
Additional Information
Packaging Disposal
Government guidelines ask that we reduce the amount of waste material disposed of in landfill sites. We therefore ask that you dispose of all packaging waste responsibly at public recycling centres. ♻️
End of Life Disposal
We at Tunturi hope you enjoy many years of enjoyable use from your fitness trainer. However, a time will come when your fitness trainer will come to the end of its useful life. Under European WEEE Legislation, you are responsible for the appropriate disposal of your fitness trainer to a recognised public collection facility. ?
Disclaimer
© 2020 Tunturi New Fitness BV. All rights reserved.
- The product and the manual are subject to change.
- Specifications can be changed without further notice.
- Check the Tunturi website for the latest user manual version.
Tunturi Fitness | Feel Better Every Day - Tunturi New Fitness B.V.
