Tunturi RC20 Pro Power Rack Rotary Core Trainer

Welcome

Welcome to the world of Tunturi Fitness! Thank you for purchasing this Tunturi equipment. Tunturi offers a wide range of home fitness equipment, including crosstrainers, treadmills, exercise bikes, rowers, strength benches, and multi-stations. Tunturi equipment is suitable for the entire family, regardless of fitness level. For more information, please visit our website at www.tunturi.com.

The Tunturi RC20 Pro Power Rack - Multigr Pull Sliders is an accessory for the RC20 Cross Fit Rack-Base Rack and cannot be used as a standalone trainer or station. For safety and warranty information, please refer to the main RC20 Cross Fit Rack-Base Rack manual, as this information is not included in this assembly manual. You can download the user manual for the RC20 Cross Fit Rack-Base Rack from our website at any time.

This user manual is an essential part of your training equipment; please read all instructions in this manual before you start using the equipment.

Important Assembly Information

Before You Start

It is recommended to use two adjustable wrenches to assemble your product. Metric wrenches of the correct size are also acceptable.

Note: Suitable adjustable wrenches are NOT provided with the product and are not included in the assembly kit.

Warning: For safety, it is strongly recommended that this equipment be assembled by two or more people to avoid potential injury.

• Ensure carriage bolts are inserted through the SQUARE holes on components that need to be assembled. Attach washers only to the end of the carriage bolt.
• Use Allen bolts or hex bolts inserted through the ROUND hole on components that need to be assembled.
• Always wait until all bolts are assembled onto the bench before tightening them.

Description Illustration A

The illustrations show the correct order for assembling your trainer.

Note: Part numbers shown in the assembly steps correspond to the spare part drawing found in the online full version user manual.

It is recommended to place the Ball Pull-UP Grips in a location where they are comfortable to use.

Warning: Assemble the equipment in the given order.

Diagram and Parts List

Diagram A-01 illustrates the components of the RC20 - Rotary Core Trainer.

Cleaning and Maintenance

• Inspect and tighten all parts before using the equipment.
• The equipment can be cleaned using a damp cloth and a mild, non-abrasive detergent. DO NOT use solvents.
• Regularly examine the equipment for signs of damage or wear.
• Replace any defective components immediately and/or keep the equipment out of use until repaired.
• Failure to examine regularly may affect the safety level of the equipment.

Defects and Malfunctions

Despite continuous quality control, defects and malfunctions caused by individual parts can occur. In most cases, it will be sufficient to replace the defective part.

• If the equipment does not function properly, contact the dealer immediately.
• Provide the dealer with the model number and serial number of the equipment.
• State the nature of the problem, the conditions of use, and the date of purchase.

Additional Information

Packaging Disposal

Government guidelines require reducing waste material sent to landfills. Please dispose of all packaging waste responsibly at public recycling centers.

End of Life Disposal

Tunturi hopes you enjoy many years of use from your fitness trainer. However, when the trainer reaches the end of its useful life, you are responsible for its proper disposal according to European WEEE legislation at a recognized public collection facility.

Disclaimer

© 2020 Tunturi New Fitness BV. All rights reserved.

The product and manual are subject to change. Specifications may change without further notice. Please check our website for the latest user manual version.