Safety Instructions
- If strong winds cause the windscreen protector to move, sand and other debris can have an abrasive effect on the paintwork.
- Clean the vehicle before use to avoid damaging the paintwork.
IMPORTANT: Do not use the windscreen protector in severe weather and strong winds when there is a limited possibility of it staying in place. The car can also be damaged.
Technical Data
| Size | 174x100 cm |
| Weight | 320 g |
Symbols
- Read the instructions.
- Recycle discarded product in accordance with local regulations.
Mounting
- Place the elastic bands round the rear view mirrors.
(Illustration description: Two hands are shown attaching elastic straps to the side mirrors of a car.) - Adjust to cover the windscreen. Make sure that the curved part covers the windscreen wipers.
(Illustration description: A person is holding the windscreen protector, adjusting it over the car's windshield. The curved part is near the windshield wipers.) - Open the doors and tuck in the ends. Make any last adjustments.
(Illustration description: A hand is shown tucking the edge of the windscreen protector into the car door frame.) - Close and lock the doors.
(Illustration description: A hand is shown closing and locking a car door, securing the windscreen protector.)
(Final illustration description: A car is shown with the windscreen protector fully installed, covering the windshield and extending down to the hood area.)
Removal
- Unhook the elastic bands from the mirrors.
- Open the doors to free the ends.
- Shake off snow and ice. Allow the windscreen protector to completely dry before putting it in the storage bag.
Maintenance
Cleaning
- Clean the windscreen protector from sand and other particles that can damage and scratch the car before putting into storage and before using on the car.
- Use water and if necessary a mild soap solution. Do not use strong chemicals as this can affect the appearance and durability of the windscreen protector.
Storage
Store the windscreen protector in a dry and safe place.
