HAMRON 619-603 Car Heater
Operating Instructions and Safety Guide
Product Overview
The HAMRON 619-603 is a compact and efficient car interior heater designed to provide warmth in your vehicle. It features a ceramic heating element and automatic temperature regulation for optimal comfort.
Technical Data
| Specification | Value |
|---|---|
| Rated Voltage | 230 V ~ 50 Hz |
| Output / Power | 1400 W (at -25 °C) |
| Cable Length | 1 m |
| Dimensions (W x H x D) | 170 x 50 x 230 mm |
Safety Instructions
Read the operating instructions carefully before use. Save them for future reference.
- Keep children under supervision to ensure they do not play with the car heater.
- Do not cover the car heater – risk of overheating. [Do not cover]
- Do not place the car heater under a power outlet.
- Check that the rated voltage for the car heater matches the voltage on the power outlet.
- Do not pull the cable to disconnect the car heater from the power outlet. Always pull the plug.
- There must be a free space of at least 30 cm in front of and behind the car heater.
- Do not use the car heater in the immediate vicinity of a bathtub, shower, or swimming pool.
- This appliance is not intended for use by persons (including children) with diminished physical, sensory, or mental abilities, or lack of experience and knowledge, unless supervised or instructed by a person responsible for their safety.
- This appliance can be used by children from 8 years and upwards and by persons with reduced physical or mental abilities or lack of experience or knowledge, if they are supervised or receive instructions concerning safe use and understand the risks involved.
- If the power cable is damaged, it must be replaced immediately by an authorized service center.
Installation
Positioning of the Car Heater
- The car heater should be placed on the center console, under the glove compartment, or under the A-pillar.
- Screw the car heater in place so that there is a free space of at least 30 cm in front and behind it.
- The car heater must only be connected to a fixed power outlet in the car.
Operation
- The car heater has a ceramic heating element.
- The heating capacity is controlled automatically in relation to the ambient temperature.
- The car heater starts with the I/O switch.
Overheating Protection
The car heater is equipped with overheating protection, which automatically switches off the heater if it gets too hot. To restart the heater, unplug the cable from the power outlet. Wait at least ten minutes until the heater has cooled down sufficiently. Then, the car heater can be plugged into the power outlet and switched on again.
Environmental Responsibility
Recycle discarded products in accordance with local regulations. JULA AB, BOX 363, SE-532 24 SKARA. Date: 2021-12-28.
