Xlink TCS100 TPMS Sensor
Spesifikasi Produk
- Model: TCS100 Sensor
- Kompatibilitas: Universal
- Bahan: Baja tahan karat
- Sumber Daya: Baterei dilakokno
- Range pangukuran: 0-100 unit
Pandhuan Safety
Before using the TCS100 Sensor, please read and follow these safety instructions:
- Always wear appropriate protective gear when handling the sensor.
- Avoid exposing the sensor to extreme temperatures or moisture.
- Do not disassemble the sensor yourself; contact a qualified technician for any repairs.
Paramèter
The TCS100 Sensor comes with the following parameters.
- Akurasi: +/- 2%
- Suhu operasi: 0-50°C
- Resolusi: 0.1 unit
Sensor Component Diagram
The diagram below illustrates the components of the TCS100 Sensor for your reference:
Langkah-langkah Operasi Instalasi
- Langkah 1: Pass nozzle liwat hub lan ndandani karo nozzle fixing nut. Elinga yen ora tightening.
Pandhuan Panggunaan Produk
- Ensure the sensor is properly connected to the power source.
- Calibrate the sensor based on your specific measurement requirements.
- Place the sensor in the desired location for accurate readings.
Pandhuan Safety
- Mangga waca manual iki kanthi teliti sadurunge nggunakake produk, kenal karo struktur produk lan master cara instalasi produk. Sadurunge instalasi, mangga konfirmasi manawa aksesoris produk wis lengkap, produk bisa mlaku kanthi normal, lan ora ana tampilan lan struktur sing ora normal. Sajrone proses instalasi, perusahaan kudu netepi spesifikasi operasi pangopènan lan nggunakake alat pangopènan profesional. Yen ora, perusahaan ora bakal tanggung jawab kanggo masalah sing disebabake dening operasi ilegal pelanggan. Yen ana masalah ing proses nggunakake produk, kudu diganti utawa mandheg langsung lan dites dening personel pangopènan profesional utawa layanan sawise-sales. Sawise nginstal produk, priksa maneh ngukur keseimbangan dinamis ban kanggo ngilangi risiko safety.
Paramèter
- Model produk: TCS-100
- Suhu panyimpenan:-10 ℃ ~ 50 ℃
- Suhu operasi:-40 ℃ ~ 125 ℃
- Range pemantauan tekanan:0-900Kpa
- Waterproof grade： IP67
- urip baterei:3-5 taun
- Tingkat daya:-33.84d Bm
- Frekuensi:314.9MHz
- Akurasi tekanan： ±7Kpa
- Akurasi suhu:± 3 ℃
- Bobot ：26g (Kanthi katup)
- ukuran:kira-kira 72.25mm * 44.27mm * 17.63mm
- Garansi: 2 taun
Diagram Komponen Sensor
Langkah-langkah Operasi Instalasi
- Langkah 1: Pass nozzle liwat hub lan ndandani karo nozzle fixing nut. Elinga yen ora tightening.
- Langkah 2: Ndandani sensor ing nozzles udhara karo sekrup mbenakake sensor. Elinga yen sensor kudu cedhak karo hub kanthi torsi 4N•m.
- Langkah 3: Kencengake nut mbenakake nozzle udara kanthi kunci kanggo ngrampungake instalasi. Elinga yen kunci nganggo torsi 7 N•m.
FCC
Piranti iki tundhuk karo Part 15 saka Aturan FCC. Operasi tundhuk karo rong syarat ing ngisor iki:
- Piranti iki bisa uga ora nyebabake gangguan mbebayani, lan
- Piranti iki kudu nampa gangguan sing ditampa, kalebu gangguan sing bisa nyebabake operasi sing ora dikarepake.
Sembarang owah-owahan utawa modifikasi sing ora disetujoni kanthi jelas dening pihak sing tanggung jawab kanggo kepatuhan bisa ngilangi wewenang pangguna kanggo ngoperasikake peralatan kasebut.
Cathetan: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient utawa pindhah antena panampa.
- Tambah pamisahan antarane peralatan lan panrima.
- Sambungake peralatan menyang stopkontak ing sirkuit beda saka sing panrima disambungake.
- Hubungi dealer utawa teknisi radio/TV sing berpengalaman kanggo njaluk bantuan.
Pitakonan sing Sering Ditakoni
- Q: How often should I calibrate the TCS100 Sensor?
- A: It is recommended to calibrate the sensor every three months for optimal performance.
- P: Apa sensor bisa digunakake ing lingkungan njaba?
- A: The sensor is designed for indoor use; avoid exposing it to outdoor conditions to prevent damage.
Dokumen / Sumber Daya
 |
Xlink TCS100 TPMS Sensor [pdf] Pandhuan TCS100, TCS100 TPMS Sensor, TPMS Sensor, Sensor |