Xlink TCS100 TPMS Sensor
Khoom Specifications
- Qauv: TCS100 Sensor
- Compatibility: Universal
- Khoom siv: Stainless hlau
- Lub zog Source: Roj teeb ua haujlwm
- Kev ntsuas ntau: 0-100 units
Cov lus qhia kev nyab xeeb
Before using the TCS100 Sensor, please read and follow these safety instructions:
- Always wear appropriate protective gear when handling the sensor.
- Avoid exposing the sensor to extreme temperatures or moisture.
- Do not disassemble the sensor yourself; contact a qualified technician for any repairs.
Tsis muaj
The TCS100 Sensor comes with the following parameters.
- Qhov tseeb: +/- 2%
- Ua haujlwm kub: 0-50 ° C
- Kev daws teeb meem: 0.1 units
Sensor Component Diagram
The diagram below illustrates the components of the TCS100 Sensor for your reference:
Cov kauj ruam ua haujlwm installation
- Kauj ruam 1: Hla lub nozzle los ntawm lub hub thiab kho nws nrog lub nozzle fixing txiv ntseej. Nco ntsoov tias nws tsis nruj.
Cov lus qhia siv khoom
- Ensure the sensor is properly connected to the power source.
- Calibrate the sensor based on your specific measurement requirements.
- Place the sensor in the desired location for accurate readings.
Cov lus qhia kev nyab xeeb
- Thov nyeem phau ntawv no ua tib zoo ua ntej siv cov khoom, paub txog cov qauv ntawm cov khoom thiab paub txog cov txheej txheem installation ntawm cov khoom. Ua ntej kev teeb tsa, thov paub meej tias cov khoom siv ua tiav, cov khoom tuaj yeem ua haujlwm ib txwm, thiab tsis muaj qhov txawv txav thiab cov qauv. Thaum lub sij hawm lub installation txheej txheem, lub tuam txhab yuav tsum nruj me ntsis raws li cov txij nkawm kev ua hauj lwm specifications thiab siv cov kev tu cov cuab yeej. Txwv tsis pub, lub tuam txhab yuav tsis muaj lub luag haujlwm rau cov teeb meem tshwm sim los ntawm cov neeg siv khoom tsis raug cai. Yog tias muaj teeb meem nyob rau hauv cov txheej txheem ntawm kev siv cov khoom, nws yuav tsum tau hloov los yog nres tam sim ntawd thiab kuaj los ntawm cov kws tu neeg mob los yog kev pab cuam tom qab muag. Tom qab txhim kho cov khoom, nco ntsoov rov ntsuas qhov sib npaug ntawm cov log tsheb kom tshem tawm cov kev pheej hmoo ntawm kev nyab xeeb.
Tsis muaj
- Khoom Model: TSO-100
- Cia kub:-10 ℃ ~ 50 ℃
- Ua haujlwm kub:-40 ℃ ~ 125 ℃
- Kev ntsuas siab ntau:0-900 hli
- Waterproof grade： IP67
- Roj teeb lub neej:3-5 xyoo
- Lub zog theem:- 33.84d wb
- Zaus:314.9MHz
- Siab raug： ±7Kpa
- Kub qhov tseeb:± 3 ℃
- Qhov hnyav:26g (Nrog valve)
- Dimensions:72.25mm * 44.27mm * 17.63 hli
- Warranty: 2 xyoo
Sensor Component daim duab
Cov kauj ruam ua haujlwm installation
- Kauj ruam 1: Hla lub nozzle los ntawm lub hub thiab kho nws nrog lub nozzle fixing txiv ntseej. Nco ntsoov tias nws tsis nruj.
- Kauj ruam 2: Txhim kho lub sensor ntawm huab cua nozzles nrog lub sensor kho ntsia hlau. Nco ntsoov tias lub sensor yuav tsum nyob ze rau lub hub nrog lub zog ntawm 4N•m.
- Kauj ruam 3: Tighten lub cua nozzle kho txiv ntoo nrog ib tug ciaj ntswj kom tiav lub installation. Nco ntsoov tias tus ciaj ntswj siv lub zog ntawm 7 N•m.
FCC
Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev ua haujlwm yog ua raws li ob yam hauv qab no:
- Cov cuab yeej no yuav tsis ua teeb meem cuam tshuam, thiab
- Cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis xav tau.
Ib qho kev hloov pauv lossis kev hloov kho uas tsis tau pom zoo los ntawm tog neeg lub luag haujlwm rau kev ua raws cai tuaj yeem ua rau tus neeg siv txoj cai ua haujlwm ntawm cov khoom siv.
Nco tseg: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient los yog tshem tawm cov kav hlau txais xov.
- Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
- Txuas cov cuab yeej mus rau lub qhov hluav taws xob ntawm ib lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
- Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.
Cov lus nug nquag
- Q: How often should I calibrate the TCS100 Sensor?
- A: It is recommended to calibrate the sensor every three months for optimal performance.
- Q: Lub sensor puas tuaj yeem siv rau hauv qhov chaw sab nraum zoov?
- A: The sensor is designed for indoor use; avoid exposing it to outdoor conditions to prevent damage.
Cov ntaub ntawv / Cov ntaub ntawv
 |
Xlink TCS100 TPMS Sensor [ua pdf] Cov lus qhia TCS100, TCS100 TPMS Sensor, TPMS Sensor, Sensor |