Xlink TCS100 TPMS Sensor
Zofotokozera Zamalonda
- Chitsanzo: TCS100 Sensor
- Kugwirizana: Zachilengedwe
- Zofunika: Chitsulo chosapanga dzimbiri
- Gwero la Mphamvu: Battery yayendetsedwa
- Muyezo Range: 0-100 magawo
Malangizo a Chitetezo
Before using the TCS100 Sensor, please read and follow these safety instructions:
- Always wear appropriate protective gear when handling the sensor.
- Avoid exposing the sensor to extreme temperatures or moisture.
- Do not disassemble the sensor yourself; contact a qualified technician for any repairs.
Parameters
The TCS100 Sensor comes with the following parameters.
- Kulondola: +/- 2%
- Kutentha kwa Ntchito: 0-50 ° C
- Kusamvana: 0.1 magawo
Sensor Component Diagram
The diagram below illustrates the components of the TCS100 Sensor for your reference:
Kukhazikitsa Njira Zogwirira Ntchito
- Gawo 1: Kudutsa nozzle kudzera likulu ndi kukonza ndi nozzle kukonza nati. Dziwani kuti sikumangitsa.
Malangizo Ogwiritsira Ntchito Zogulitsa
- Ensure the sensor is properly connected to the power source.
- Calibrate the sensor based on your specific measurement requirements.
- Place the sensor in the desired location for accurate readings.
Malangizo a Chitetezo
- Chonde werengani bukuli mosamala musanagwiritse ntchito mankhwalawo, dziwani bwino kamangidwe kake komanso dziwani njira yoyikitsira. Musanakhazikitse, chonde tsimikizirani kuti zida zamtunduwu zatha, zogulitsa zimatha kugwira ntchito bwino, ndipo palibe mawonekedwe ndi mawonekedwe achilendo. Pakukhazikitsa, kampaniyo imayenera kutsatira mosamalitsa zomwe zakonzedwa komanso kugwiritsa ntchito zida zosamalira akatswiri. Apo ayi, kampaniyo sidzakhala ndi udindo pazovuta zilizonse zomwe zimayambitsidwa ndi ntchito yosaloledwa ya kasitomala. Ngati pali vuto lililonse pogwiritsira ntchito chinthucho, chiyenera kusinthidwa kapena kuyimitsidwa nthawi yomweyo ndikuyesedwa ndi akatswiri ogwira ntchito yokonza kapena pambuyo pogulitsa ntchito. Mukayika chinthucho, onetsetsani kuti mwayesanso mphamvu ya tayala kuti muchotse zoopsa zachitetezo.
Parameters
- Mtundu wa malonda: Chithunzi cha TCS-100
- Kutentha kosungira:-10 ℃ ~ 50 ℃
- Kutentha kwa ntchito:-40 ℃ ~ 125 ℃
- Mtundu wowunika kuthamanga:0-900 Kpa
- Waterproof grade： IP67
- Moyo wa Battery:3-5 zaka
- Mphamvu yamagetsi:-33.84d Bm
- pafupipafupi:314.9MHz
- Kulondola kwamphamvu： ±7Kpa
- Kutentha kolondola:± 3 ℃
- Kulemera kwake:26g (ndi vavu)
- Makulidwe:pafupifupi.72.25mm*44.27mm*17.63mm
- Chitsimikizo: zaka 2
Chithunzi cha Sensor Component
Kukhazikitsa Njira Zogwirira Ntchito
- Gawo 1: Kudutsa nozzle kudzera likulu ndi kukonza ndi nozzle kukonza nati. Dziwani kuti sikumangitsa.
- Gawo 2: Konzani sensa pa ma nozzles a mpweya ndi zomangira za sensor fixing. Zindikirani kuti sensa iyenera kukhala pafupi ndi malo okhala ndi torque ya 4N•m.
- Gawo 3: Mangani mpweya nozzle kukonza nati ndi wrench kumaliza unsembe. Dziwani kuti wrench imagwiritsa ntchito torque ya 7 N•m.
FCC
Chipangizochi chikugwirizana ndi Gawo 15 la Malamulo a FCC. Kugwira ntchito kumadalira zinthu ziwiri izi:
- Chipangizochi sichikhoza kuyambitsa kusokoneza kovulaza, ndi
- Chipangizochi chiyenera kuvomereza kusokonezedwa kulikonse komwe kulandidwa, kuphatikiza kusokoneza komwe kungayambitse ntchito yosafunikira.
Kusintha kulikonse kapena kusintha komwe sikunavomerezedwe mwachindunji ndi gulu lomwe limayang'anira kutsata kungathe kulepheretsa wogwiritsa ntchito kugwiritsa ntchito zidazo.
Zindikirani: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Yankhanitsaninso kapena sinthani mlongoti wolandira.
- Wonjezerani kulekana pakati pa zida ndi wolandila.
- Lumikizani zida ndi potuluka padera losiyana ndi lomwe wolandila amalumikizidwa.
- Funsani wogulitsa kapena wodziwa ntchito pa wailesi/TV kuti akuthandizeni.
Mafunso Ofunsidwa Kawirikawiri
- Q: How often should I calibrate the TCS100 Sensor?
- A: It is recommended to calibrate the sensor every three months for optimal performance.
- Q: Kodi sensor ingagwiritsidwe ntchito m'malo akunja?
- A: The sensor is designed for indoor use; avoid exposing it to outdoor conditions to prevent damage.
Zolemba / Zothandizira
 |
Xlink TCS100 TPMS Sensor [pdf] Malangizo TCS100, TCS100 TPMS Sensor, TPMS Sensor, Sensor |