Monitor LCD
Manual pangguna
24B15H2

Safety

Konvensi Nasional
Subbagian ing ngisor iki njlèntrèhaké konvensi notasi sing digunakake ing dokumen iki.
Cathetan, Ati-ati, lan Pènget
Saindhenging pandhuan iki, blok teks bisa uga diiringi lambang lan dicithak kanthi kandel utawa miring. Blok kasebut minangka cathetan, ati-ati, lan bebaya, lan digunakake kaya ing ngisor iki:
CATETAN: CATETAN nuduhake informasi penting sing mbantu sampeyan nggunakake sistem komputer kanthi luwih apik.
AWAS: AWAS nuduhake karusakan potensial kanggo hardware utawa mundhut data lan ngandhani carane supaya masalah.
WARNING: PÈNGET nuduhake potensial kanggo cilaka awak lan ngandhani carane supaya masalah. Sawetara bebaya bisa uga katon ing format alternatif lan bisa uga ora diiringi lambang. Ing kasus kaya mengkono, presentation tartamtu saka bebaya diwenehake dening panguwasa peraturan.

daya

Monitor kudu dioperasikake mung saka jinis sumber daya sing dituduhake ing label. Yen sampeyan ora yakin karo jinis daya sing diwenehake menyang omah sampeyan, hubungi dealer utawa perusahaan listrik lokal.
Monitor dilengkapi plug grounding telung pronged, plug karo pin katelu (grounding). Plug iki mung pas karo stopkontak sing wis grounded minangka fitur safety. Yen stopkontak sampeyan ora nampung plug telung kabel, njaluk tukang listrik masang stopkontak sing bener, utawa gunakake adaptor kanggo lemah piranti kanthi aman. Aja ngalahake tujuan safety saka plug grounded.
Copot unit kasebut sajrone badai bledheg utawa nalika ora digunakake kanggo wektu sing suwe. Iki bakal nglindhungi monitor saka karusakan amarga lonjakan daya.
Aja kakehan kabel daya lan kabel ekstensi. Overloading bisa nyebabake geni utawa kejut listrik.
Kanggo mesthekake operasi sing marem, gunakake monitor mung karo komputer kadhaptar UL sing duwe wadah sing dikonfigurasi sing cocog sing ditandhani antarane 100-240V AC, Min. 5A.
Soket tembok kudu dipasang ing cedhak peralatan lan kudu gampang diakses.
For use only with included power adapter:
Produsen: Shenzhen Suoyuan Technology Co., Ltd.
Model: SOΥ-1200200EU-539

Instalasi

Aja nyelehake monitor ing gerobak, stand, tripod, braket, utawa meja sing ora stabil. Yen monitor tiba, bisa cilaka wong lan nyebabake karusakan serius kanggo produk iki. Gunakake mung cart, stand, tripod, krenjang, utawa meja dianjurake dening pabrikan utawa didol karo produk iki. Tindakake pandhuan pabrikan nalika nginstal produk lan gunakake aksesoris pemasangan sing disaranake pabrikan. Kombinasi produk lan cart kudu dipindhah kanthi ati-ati.
Aja push sembarang obyek menyang slot ing kabinet monitor. Bisa ngrusak bagean sirkuit sing nyebabake geni utawa kejut listrik. Aja nyemprotake cairan ing monitor.
  Aja nyelehake ngarep produk ing lantai.
Yen sampeyan masang monitor ing tembok utawa rak, gunakake kit pemasangan sing disetujoni pabrikan lan tindakake pandhuane kit.
Ninggalake sawetara papan ing monitor kaya sing ditampilake ing ngisor iki. Yen ora, sirkulasi udara bisa uga ora nyukupi mula panas banget bisa nyebabake geni utawa ngrusak monitor.
Kanggo ngindhari karusakan potensial, contoneamppanel peeling saka ngelmu kebatinan, priksa manawa monitor ora ngiringake mudhun dening luwih saka -5 derajat. Yen -5 derajat mudhun amba ngiringake maksimum ngluwihi, karusakan monitor ora bakal dijamin ing babar pisan.
Deleng ing ngisor iki area ventilasi sing disaranake ing sekitar monitor nalika monitor dipasang ing tembok utawa ing stand:

Reresik

Ngresiki lemari kanthi rutin nganggo kain. Sampeyan bisa nggunakake deterjen alus kanggo ngilangke noda, tinimbang deterjen kuwat sing bakal ngrusak kabinet produk.
Nalika ngresiki, priksa manawa ora ana deterjen sing bocor menyang produk. Kain pembersih ngirim ora kasar banget amarga bakal ngeruk permukaan layar.
Mangga copot kabel daya sadurunge ngresiki produk.

Liyane

Yen produk mambu aneh, swara utawa kumelun, copot plug daya lan hubungi Pusat Layanan.
Priksa manawa bukaan ventilasi ora diblokir dening meja utawa tirai.
Aja nyambungake monitor LCD ing getaran abot utawa kahanan impact dhuwur nalika operasi.
Aja nuthuk utawa nyelehake monitor sajrone operasi utawa transportasi.

Setup

Isi ing Kothak

* Ora kabeh kabel sinyal bakal diwenehake kanggo kabeh negara lan wilayah. Mangga dipriksa karo dealer lokal utawa kantor cabang AOC kanggo konfirmasi.

Setup Stand & Base
Mangga nyiyapake utawa mbusak pangkalan kanthi langkah-langkah kaya ing ngisor iki.

Nyetel Viewing Angle
Kanggo optimal viewDisaranake ndeleng tampilan lengkap monitor, banjur atur sudut monitor miturut pilihan sampeyan.
Tahan stand supaya sampeyan ora nggulingake monitor nalika ngganti sudut monitor.
Sampeyan bisa nyetel monitor kaya ing ngisor iki:

CATETAN:
Aja ndemek layar LCD nalika ngganti sudut. Bisa nyebabake karusakan utawa rusak layar LCD.
Pènget

• Kanggo ngindhari karusakan layar, kayata peeling panel, priksa manawa monitor ora miring mudhun luwih saka -5 derajat.
• Aja pencet layar nalika nyetel sudut monitor. Nangkep mung bezel.

Nyambungake Monitor

Sambungan Kabel Ing Mburi Monitor lan Komputer:

1. D SUB
2. HDMI
3. daya

Nyambung menyang PC

1. Sambungake adaptor daya menyang mburi tampilan kanthi kenceng.
2.  Pateni komputer lan copot kabel daya.
3. Sambungake kabel sinyal tampilan menyang konektor video ing mburi komputer.
4.  Tancepake kabel daya komputer lan adaptor daya layar menyang stopkontak sing cedhak.
5. Nguripake komputer lan nampilake.

Yen monitor sampeyan nampilake gambar, instalasi wis rampung. Yen ora nampilake gambar, waca Ngatasi Masalah.
Kanggo nglindhungi peralatan, tansah mateni PC lan monitor LCD sadurunge nyambungake.

Wawasan sing cetha

1. When the OSD is not displayed, press the “<” button to activate Clear Vision. one
2. Use the “<” or “>” button to select settings such as weak, medium, strong, or off. The default setting is always’ off ‘
   
3. Press and hold the “<” button for 5 seconds to activate the Clear Vision demo, and the message “Clear Vision Demo: on” will appear on the screen. Press the menu or exit button, and the message will disappear. Press and hold the ‘〈’ button again for 5 seconds to close the Clear Vision demonstration.(Clear Vision demo: On) Five seconds.

Fungsi Clear Vision bisa ngowahi gambar burem kanthi resolusi rendah dadi gambar sing cetha lan jelas, nyedhiyakake gambar sing paling apik viewing pengalaman.

Wawasan sing cetha	ringkih	Nyetel Clear Vision.
	tengah
	kuwat
	cedhak
Clear Vision demonstrate	Disable or Enable	Disable or enable demonstrations

Nyetel

Hotkeys

1	Sumber / Otomatis / Metu
2	Wawasan sing cetha/
3	Image Ratio/>
4	Menu / Ketik
5	daya

Menu / Ketik
Pencet kanggo nampilake OSD utawa konfirmasi pilihan.
daya
Pencet tombol Daya kanggo nguripake monitor.
Rasio gambar/>
When the OSD menu is turned off, press the “>” key to enter the image scale switching function, and press the “<” or “>” key to switch between 4:3 or widescreen modes. If the input resolution of the product is widescreen mode, the “Image Scale” item in the OSD cannot be adjusted.
Wawasan sing cetha/
When the OSD menu is turned off, if the input is a D-SUB signal source, holding down this key for about 2 seconds will enter the automatic adjustment function. The automatic adjustment function will automatically set the horizontal position, vertical position, clock, and phase.
When the OSD menu is turned off, press this key to activate the signal source switching function. Continuously press this key to select the signal source displayed in the information bar, and press the menu key to adjust to select the signal source.
When the OSD menu is active, this button serves as the exit key (to exit the OSD menu).
Sumber / Otomatis / Metu
Nalika OSD ditutup, penet Source / tombol Exit bakal Source fungsi tombol panas.

Setelan OSD
Instruksi dhasar lan prasaja ing tombol kontrol.

1. Tekan ing MENU-tombol kanggo ngaktifake jendhela OSD.
2. Press Left or > Right to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it, press < Left or > Right to navigate through the sub-menu functions. Once the desired function is highlighted, press   MENU-tombol kanggo ngaktifake.
3.  Press <Left or > to change the settings of the selected function. Press kanggo metu. Yen sampeyan pengin nyetel fungsi liyane, baleni langkah 2-3.
4. Fungsi Kunci OSD: Kanggo ngunci OSD, penet terus tombol MENU-tombol nalika monitor mati banjur pencet tombol daya kanggo nguripake monitor. Kanggo mbukak kunci OSD – penet terus tombol MENU-tombol nalika monitor mati banjur pencet tombol daya kanggo nguripake monitor.

Cathetan:

1. Yen produk mung duwe siji input sinyal, item "Input Select" dipateni kanggo nyetel.
2. Yen resolusi sinyal input produk minangka resolusi lokal, item "Rasio Gambar" ora sah.
3. mode ECO (kajaba mode Standard), DCR, mode DCB lan Picture Boost, kanggo papat negara iki mung siji negara bisa ana.

Luminance

	Kontras	0-100		Kontras saka Digital-register.
	padhang	0-100		Imbuhan Backlight.
	Mode eko	Standar		Mode standar.
		Teks		Mode Teks.
		internet		Mode Internet.
		Game		Mode Game.
		Wayang		Mode Wayang.
		Olahraga		Mode Olahraga.
		maca		Mode maca.
	Gamma	Gammal		Setel menyang Gamma 1.
		Gamma 2		Setel menyang Gamma 2.
		Gamma 3		Setel menyang Gamma 3.
	DCR	Mati		Pateni rasio kontras dinamis.
		On		Aktifake rasio kontras dinamis.
	Mode HDR	Mati		Optimized kanggo werna lan kontras saka gambar, kang bakal simulasi nuduhake efek HDR. Cathetan: Nalika HDR ora dideteksi, opsi HDR Mode ditampilake kanggo pangaturan.
		Gambar HDR
		Film HDR
		Game HDR

Cathetan:

1. Nalika "Mode HDR" disetel menyang "ora mati", item "Kontras", "Mode Eco", "Gamma" ora bisa diatur.

Setelan Gambar

	jam	0-100	Adjust the image clock to reduce vertical line noise
	fase	0-100	Adjust the image phase to reduce horizontal line noise
	Ketajaman	0-100	Nyetel ketajaman gambar.
	H. Posisi	0-100	Adjust the horizontal position of the image
	V. Posisi	0-100	Adjust the vertical position of the image.

Setup Warna

	Suhu Warna.	anget	Suhu Warna Anget
		Normal	Normal Color Temperature
		Kelangan	Suhu Warna Kelangan
		panganggo	Suhu Warna
	abang	0-100	gain abang saka Digital-ndhaftar.
	Ijo	0-100	Green gain saka Digital-ndhaftar.
	Biru	0-100	Blue gain saka Digital-ndhaftar.
	Mode DCB	Mati	Pateni Mode DCB.
		Nambah Penuh	Aktifake kebak Enhance Mode.
		Kulit Alam	Aktifake Mode Kulit Alam.
		Sawah Ijo	Aktifake Mode Lapangan Ijo.
		Langit biru	Aktifake Mode Langit-biru.
		Deteksi Otomatis	Aktifake Mode Deteksi Otomatis.
	Demo DCB	On utawa Off	Pateni utawa Aktifake Demo.

Cathetan:
When “HDR Mode” or “HDR” under “Brightness” is set to non-off, all items under “Color Settings” cannot be adjusted.
Nalika Color Setup disetel menyang sRGB, kabeh item liyane ing Color Gamut ora bisa diatur.

Gambar ngedongkrak

	Bingkai padhang	On utawa Off	Pateni utawa Aktifake Bingkai Padhang.
	Ukuran Frame	14-100	Nyetel Ukuran Frame.
	padhang	0-100	Nyetel padhange pigura.
	Kontras	0-100	Nyetel Kontras Bingkai.
	Posisi H.	0-100	Setel Posisi Horisontal Bingkai.
	Posisi V.	0-100	Nyetel Frame Vertikal Posisi.

Cathetan:
Setel padhang, kontras, lan posisi Bingkai Padhang supaya luwih apik viewing pengalaman.
Nalika "Mode HDR" utawa "HDR" ing "Luminance" disetel dadi "non-mati", kabeh item ing "Picture Boost" ora bisa diatur.

Persiyapan OSD

	Basa		Pilih basa OSD.
	wektu entek	5-120	Setel OSout Timeout.
	H. Posisi	0-100	Setel posisi horisontal OSD.
	V. Posisi	0-100	Nyetel posisi vertikal OSD.
	Volume	0-100	Pangaturan Volume.
	Transparansi	0-100	Nyetel transparansi OSD.
	Pangeling Break	On utawa Off	Pateni pangeling yen pangguna terus-terusan kerja luwih saka 1 jam.

Setelan Game

	Mode Game	Mati	Ora ana optimisasi kanthi game gambar Cerdas
		FPS	Kanggo muter game FPS (first Person Shooters). Ngapikake rincian tingkat ireng tema peteng.
		RTS	Kanggo muter RTS (Strategi Real Time). Ngapikake kualitas gambar.
		balapan	Kanggo muter game Racing, Nyedhiyani wektu respon paling cepet lan werna jenuh dhuwur.
		Tukang game 1	Setelan preferensi pangguna disimpen minangka Gamer 1.
		Tukang game 2	Setelan preferensi pangguna disimpen minangka Gamer 2.
		Tukang game 3	Setelan preferensi pangguna disimpen minangka Gamer 3.
	Kontrol Shadow	0-100	Shadow Control Default yaiku 50, banjur pangguna pungkasan bisa nyetel saka 50 dadi 100 utawa 0 kanggo nambah kontras kanggo gambar sing bening. 1.  If picture is too dark to be saw the detail clearly, adjusting from 50 to100 for clear picture. 2. Yen gambar putih banget ora bisa dideleng kanthi jelas, atur saka 50 nganti 0 kanggo gambar sing jelas
	Warna Game	0-20	Warna Game bakal nyedhiyakake level 0-20 kanggo nyetel saturasi kanggo entuk gambar sing luwih apik.
	Mode LowBlue	Close/multimedia/ network/office/reading	Reduce blue light waves by controlling color temperature.
	DialPoint	On / Off	Nguripake utawa mateni crosshair game

Cathetan:
Nalika "HDR Mode" ing "Luminance" disetel menyang "non-off", item "Mode Game", "Shadow Control", "Color Game", "Low Blue Mode" ora bisa diatur.

Ekstra

	Pilih Input	Otomatis/HDMI/DP	Pilih Sumber Sinyal Input.
	Mati wektu	0-24jam	Pilih wektu mati DC.
	Rasio Gambar	Jembar / 4:3	Pilih rasio gambar kanggo tampilan.
	DDC/CI	Ya utawa Ora	Dukungan ON / MATI DDC / CI.
	Over Clock*	Ya utawa Ora	Disable or enable the overclocking function. Select the “Overclocking” function, and after the monitor restarts, Change the maximum refresh rate setting in the operating system Control panel. If the screen displays abnormally, close the display menu Set overclocking.
	Reset	Ya utawa Ora	Reset menu dadi standar.

metu

metu

Metu OSD utama

Indikator LED

Status	Warna LED
Mode Daya Lengkap	Putih
Mode Aktif-mati	Oranye

Ngatasi masalah

Masalah & Pitakonan	Solusi sing bisa ditindakake
Daya LED Ora ON	Priksa manawa tombol daya ON lan Kabel Daya wis disambungake kanthi bener menyang stopkontak lan monitor.
No images on the screen•	Apa kabel listrik disambungake kanthi bener? Priksa sambungan kabel daya lan sumber daya. • Is the cable connected correctly? (Connected using the VGA cable) Check the VGA cable connection. (Connected using the NOM! cable) Check the HDMI cable connection. (Connected using the DP cable) Check the DP cable connection. ‘ VGA/HDMI/DP input is not available on every model. • Yen the power is on, reboot the computer to see the initial screen (the login screen), which can be seen. If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows 7/8/10) and then change the frequency of the video card. (Waca Setelan Resolusi Optimal) If the initial screen (the login screen) does not appear, contact the Service Pusat utawa bakul Panjenengan. • Apa sampeyan bisa ndeleng "Input Ora Didhukung" ing layar? Sampeyan bisa ndeleng pesen iki nalika sinyal saka kertu video ngluwihi resolusi maksimum lan frekuensi sing monitor bisa ditangani kanthi bener. Setel resolusi lan frekuensi maksimum sing bisa ditangani kanthi bener dening monitor. •  Make sure the AOC Monitor Drivers are installed.
Gambar Kabur & Nduwe Masalah Shadowing Ghosting	Nyetel Kontrol Kontras lan Padhang. Pencet kanggo nyetel otomatis. Priksa manawa sampeyan ora nggunakake kabel extension utawa kothak switch. Disaranake plug monitor langsung menyang konektor output kertu video ing mburi.
Gambar Mumbul, Flickers Utawa Pola Gelombang Katon Ing Gambar	Pindhah piranti listrik sing bisa nyebabake gangguan listrik adoh saka monitor. Use the maximum refresh rate your monitor is capable of at the resolution you are nggunakake.
Ngawasi Is Stuck In Active Off- modus”	Ngalih Daya Komputer kudu ing posisi ON. Kertu Video Komputer kudu dipasang kanthi pas ing slot kasebut. Priksa manawa kabel video monitor wis disambungake kanthi bener menyang komputer. Priksa kabel video monitor lan priksa manawa ora ana pin sing mbengkongake. Priksa manawa komputer sampeyan bisa digunakake kanthi mencet tombol CAPS LOCK ing keyboard nalika mirsani LED CAPS LOCK. LED kudu nguripake utawa OFF sawise mencet tombol CAPS LOCK.
Ilang siji saka utami werna (abang, ijo, utawa biru)	Priksa kabel video monitor lan priksa manawa ora ana pin sing rusak. Priksa manawa kabel video monitor wis disambungake kanthi bener menyang komputer.
Screen image is not centered utawa ukuran sing bener	Setel Posisi H lan Posisi V utawa pencet tombol panas (AUTO).
Gambar duwe cacat warna (putih ora katon putih)	Setel warna RGB utawa pilih suhu warna sing dikarepake.
Gangguan horisontal utawa vertikal ing layar	Gunakake mode mati Windows 7/8/10 kanggo nyetel JAM lan FOKUS. Pencet kanggo nyetel otomatis.
Regulasi & Layanan	Mangga deleng Regulasi & Informasi Layanan sing ana ing manual CD utawa www.aoc.com (kanggo nemokake model sing sampeyan tuku ing negara sampeyan lan golek Informasi Peraturan & Layanan ing kaca Dhukungan.

Spesifikasi

Panel	Jeneng Model	24B15H2
	Sistem nyopir	LCD Warna TFT
	Viewbisa Ukuran Gambar	60.5 cm diagonal
	Pitch Piksel	0.2745mm (H) x 0.2745mm (V)
	Video	HDMI Interface & R,G,B
	Sync kapisah.	FUV TTL
	Warna Tampilan	16.7M
liyane	Range Scan Horizontal	30k-85kHz (D-SUB) 30k-115kHz (HDMI)
	Ukuran scan horisontal (Maksimum)	527.04 mm
	Range Scan Vertikal	48-75Hz (D-SUB) 48-100Hz (HDMI)
	Ukuran Pindai Vertikal (Maksimum)	296.46 mm
	Resolusi Preset Optimal	1920×1080@60Hz
	Resolusi Max	1920×1080@75Hz(D-SUB)* 1920×1080@100Hz(HDMI)
	Plug & Play	VESA DDC2B / CI
	Sumber Daya	D-Sub 15 pin/HDMI
	Konsumsi Daya	12V 2.0A
	Konektor	Typical(defautt brightness and contrast)		22W
		Maks. (padhang = 100, kontras = 100)		≤24W
		Mode siyaga		≤0.3W
Karakteristik Fisik	Tipe Konektor	D-Sub/HDMI
	Tipe Kabel Sinyal	Bisa dicopot
lingkungan	Suhu	Operasi	0°C∼ 40°C
		Non-Operasi	-25°C∼ 55°C
	Kelembapan	Operasi	10% ~ 85% (non-kondensasi)
		Non-Operasi	5% ~ 93% (non-kondensasi)
	Altitude	Operasi	Om∼ 5000 m (Oft— 16404ft )
		Non-Operasi	Om∼ 12192m (Oft— 40000ft )

*: Amarga masalah kompatibilitas karo sawetara kertu grafis, nalika D-SUB sinyal input, yen resolusi 1920 × 1080@75Hz Yen ana kesalahan, atur refresh rate kanggo 60Hz.

Mode Tampilan Prasetel

STANDAR	RESOLUSI	HORIZONTAL FREKUENSI (KHz) VERTIKAL	FREKUENSI (Hz)
VGA	640×480@60Hz	31.469	59.94
	640×480@72Hz	37.861	72.809
	640×480@75Hz	37.500	75.000
MAC MODES VGA	640×480@67Hz	35.000	66.667
MODE IBM	720×400@70Hz	31.469	70.087
SVGA	800×600@56Hz	35.156	56.25
	800 × 600 © 60Hz	37.879	60.317
	800×600@72Hz	48.077	72.188
	800×600@75Hz	46.875	75.000
MAC MIDE SVGA	835 x 624@75Hz	49.725	74.500
XGA	1024×768@60Hz	48.363	60.004
	1024 × 768 © 70Hz	56.476	70.069
	1024×768@75Hz	60.023	75.029
SXGA	1280×1024@60Hz	63.981	60.020
	1280×1024@7514z	79.976	75.025
WSXG	1280×720@60Hz	45.000	60.000
	1280×960@60Hz	60.000	60.000
WXGA+	1440 × 900 © 60Hz	55.935	59.876
WSXGA +	1680×1050@60Hz	65.290	59.954
FHD	1920 × 1080 © 60Hz	67.500	60.000
	1920×1080@75Hz	83.909	74.986
	1920×1080@100Hz	110	100

Miturut standar VESA, sistem operasi lan kertu grafis sing beda-beda bisa uga duwe kesalahan tartamtu (+/- 1HZ) nalika ngitung tingkat refresh (frekuensi lapangan), tingkat refresh tartamtu (frekuensi lapangan).

Pin Assignments

Pin No.	Jeneng Sinyal	Pin No.	Jeneng Sinyal	Pin No.	Jeneng Sinyal
1.	Data TMDS 2+	9.	Data TMDS 0-	17.	DDC / Lemah CEC
2.	Data TMDS 2 Shield	10.	Jam TMDS +	18.	Daya + 5 V
3.	Data TMDS 2-	11.	TMDS Jam Shield	19.	Ndeteksi Plug Panas
4.	Data TMDS 1+	12.	Jam TMDS-
5.	Data TMDS 1Shield	13.	CEC
6.	Data TMDS 1-	14.	Reserved (NC ing piranti)
7.	Data TMDS 0+	15.	SCL
8.	Data TMDS 0 Shield	16.	SDA

Kabel Sinyal Tampilan Warna 20-Pin

Pin No.	Jeneng Sinyal	Pin No.	Jeneng Sinyal
1	ML_Lane 3 (n)	11	GND
2	GND	12	ML_Lane 0 (p)
3	ML_Lane 3 (p)	13	KONFIGURASI1
4	ML_Lane 2 (n)	14	KONFIGURASI2
5	GND	15	AUX_CH (p)
6	ML_Lane 2 (p)	16	GND
7	ML_Lane 1 (n)	17	AUX_CH (n)
8	GND	18	Ndeteksi Plug Panas
9	ML_Lane 1 (p)	19	Bali menyang DP_PWR
10	ML_Lane 0 (n)	20	DP_PWR

Plug lan Play
Fitur Plug & Play DDC2B
Monitor iki dilengkapi kapabilitas VESA DDC2B miturut STANDAR VESA DDC. Iki ngidini monitor ngandhani sistem inang babagan identitas lan, gumantung saka tingkat DDC sing digunakake, menehi informasi tambahan babagan kemampuan tampilan.
DDC2B minangka saluran data bi-arah adhedhasar protokol I2C. Tuan rumah bisa njaluk informasi EDID liwat saluran DDC2B.
Katrangan hak cipta

HDMI、HDMI High-Definition Multimedia Interface and other terms、HDMI trade appearance and HDMI labels are all HDMI Licensing Administrator, Inc.is a trademark or registered trademark.
Other trademarks, product names, service names and company names appearing in this specification and the products described in this specification are the property of their respective owners.

Dokumen / Sumber Daya

Monitor LCD AOC 24B15H2 [pdf] Manual pangguna 24B15H2, Q27G10SE, 24B15H2 Monitor LCD, 24B15H2, Monitor LCD, Monitor

Referensi

• Manual pangguna