HONGWEI MICROELECTRONICS ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module User Guide

תוֹכֶן לְהַסתִיר
1 ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module
2 מידע על המוצר
2.1 מפרטים:
3 הוראות שימוש במוצר:
3.1 1. Download Software and Development Board:
3.2 2. Add ESP32 Development Environment:
3.3 3. Start Downloading and Testing:
4 שאלות נפוצות (שאלות נפוצות):
4.1 Q: How do I troubleshoot if the blue indicator light does not flash after uploading?
4.2 Q: Can I use other development environments with this ESP32 board?
4.3 מסמכים / משאבים
4.3.1 הפניות

ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module

“

מידע על המוצר

מפרטים:

הוראות שימוש במוצר:

1. Download Software and Development Board:

  1. Download the Arduino IDE software from the official webאֲתַר
    כאמור לעיל.
  2. Open the Arduino IDE software to start the setup process.

2. Add ESP32 Development Environment:

  1. ב-Arduino IDE, עבור אל File -> Preferences (shortcut key
    ‘Ctrl+,’).
  2. Add the JSON address of the ESP32 development board in the
    board manager settings.
  3. Click ‘OK’ to confirm and return to the Arduino IDE
    דף הבית.
  4. In the Development Board Manager, search for ESP32 and install
    סביבת הפיתוח.

3. Start Downloading and Testing:

  1. לִבחוֹר File -> דוגמהample -> Blink to download a flashing
    light program for testing.
  2. Modify the code as needed, such as changing LED_PIN to the
    desired pin number.
  3. Select the corresponding port and development board model in
    Arduino IDE.
  4. If the Com port is not recognized, manually enter download mode
    following the provided methods.
  5. Click upload and wait for the download to complete. The blue
    indicator light on the module should flash normally.

שאלות נפוצות (שאלות נפוצות):

Q: How do I troubleshoot if the blue indicator light does not
flash after uploading?

A: Check the connection between the development board and your
computer, ensure the correct port and board are selected in Arduino
IDE, and try re-uploading the program.

Q: Can I use other development environments with this ESP32
גלשן?

A: While these instructions are tailored for Arduino IDE, you
may be able to adapt them for other environments that support ESP32
הִתפַּתְחוּת.

"`

View Fullscreen

__________________________________________________________________________________
הוראות:
1. Download software and development board
2. We use modules in Arduino IDE (which can be downloaded from the official website) https://www.arduino.cc/en/Main/Software Using the development environment as an ex
ample to illustrate the usage of modules. Open the Arduino IDE software and the following interface will appear
2.Add ESP32 development environment
ESP32 development environment add path In Arduino IDE, open File ->Preferences (shortcut key ‘Ctrl+,’). support https://dl.espressif.com/dl/package_esp32_index.json Put the JSON address of this development board into the attachment In the website of the development board manager. Click ‘OK’ (the new version is’ OK ‘). Click ‘OK’ again (the new version is’ OK ‘) to return to the Arduino IDE homepage.

__________________________________________________________________________________
Click on the Development Board Manager, the Development Board Manager window appears, search for ESP32, and install the development environment

__________________________________________________________________________________
Installed ones can be used directly. After the uninstalled installation, it can be seen in the development board that a lot of support for ESP32 modules has been added.
3.Start downloading the flashing light program for testing: Select File - למשלample – BLink
As shown in the figure below, change LED_SULLTIN to 8

__________________________________________________________________________________
Select the corresponding port and development board model Note: If the Com port cannot be recognized on Arduino, you can try the following method: Manually enter download mode: Method 1: Press and hold BOOT to power on. Method 2: Hold down the BOOT button on ESP32C3, then press the RESET button, release the RESET button, and then release the BOOT button. At this point, ESP32C3 will enter download mode.
Click upload, wait for the download to complete, and the blue indicator light on the module will flash normally

מסמכים / משאבים

HONGWEI MICROELECTRONICS ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module [pdfמדריך למשתמש
ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module, ESP32 C3, Development Board Modules Mini Wifi BT Bluetooth Module, Board Modules Mini Wifi BT Bluetooth Module, Wifi BT Bluetooth Module, BT Bluetooth Module, Bluetooth Module

הפניות

השאר תגובה

כתובת האימייל שלך לא תפורסם. שדות חובה מסומנים *