Continguts
amagar
Mòduls de placa de desenvolupament HONGWEI MICROELECTRONICS ESP32 C3 Mòdul Mini Wifi BT Bluetooth
Especificacions
- Producte: ESP32 Development Board
- Fabricant: Espressif
- Compatibilitat: Arduino IDE
- Weblloc: https://www.arduino.cc/en/Main/Software
Instruccions d'ús del producte
Download Software and Development Board
- Baixeu el programari Arduino IDE des del lloc web oficial weblloc proporcionat anteriorment.
- Obriu el programari Arduino IDE per iniciar el procés de configuració.
Add ESP32 Development Environment
- A l'IDE d'Arduino, aneu a File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- Seleccioneu File -> Example -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
Exempció de responsabilitat i avís de drets d'autor
Informació d'aquest document, inclòs URL adreces de referència, està subjecte a canvis sense previ avís. La documentació es proporciona "tal com és" sense cap garantia de cap tipus, incloses les garanties de comerciabilitat, adequació per a un propòsit particular o no infracció, i qualsevol garantia referida a qualsevol altra part de qualsevol proposta, especificació o s.ample. No s'assumeix cap responsabilitat en aquest document, inclosa cap responsabilitat per la infracció de qualsevol dret de patent derivada de l'ús de la informació d'aquest document. Aquest document no atorga, per prohibició o d'una altra manera, cap llicència, expressa o implícita, per utilitzar cap dret de propietat intel·lectual.
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
Nota
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
Acabatview
Presentació del producte
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
Paràmetres
Introducció de components
Components and interfaces
Nota: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
Definició del pin
La il·lustració positiva següent mostra l'ESP32-C3-MINI-1-TB com a exempleampLI:
Notes
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
Introducció a la funció
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
Guia de gravació de programes
- Abans d'engegar, assegureu-vos que l'ESP32-C3-MINI-1-TB i l'ESP32-C3-MINI-1U-TB estiguin intactes.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
Historial de revisions
Preguntes freqüents
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
Documents/Recursos
 |
Mòduls de placa de desenvolupament HONGWEI MICROELECTRONICS ESP32 C3 Mòdul Mini Wifi BT Bluetooth [pdfGuia de l'usuari Mòduls de placa de desenvolupament ESP32 C3 Mòdul Mini Wifi BT Bluetooth, ESP32 C3, Mòduls de placa de desenvolupament Mòdul Mini Wifi BT Bluetooth, Mòduls de placa Mòdul Mini Wifi BT Bluetooth, Mòdul Wifi BT Bluetooth, Mòdul BT Bluetooth, Mòdul Bluetooth |