Yaliyomo
kujificha
HONGWEI MICROELECTRONICS ESP32 C3 Moduli za Bodi ya Ukuzaji Mini Wifi BT Bluetooth Moduli
Vipimo
- Bidhaa: ESP32 Development Board
- Mtengenezaji: Espressif
- Utangamano: Arduino IDE
- Webtovuti: https://www.arduino.cc/en/Main/Software
Maagizo ya Matumizi ya Bidhaa
Download Software and Development Board
- Pakua programu ya Arduino IDE kutoka kwa rasmi webtovuti iliyotolewa hapo juu.
- Fungua programu ya Arduino IDE ili kuanza mchakato wa usanidi.
Add ESP32 Development Environment
- Katika Arduino IDE, nenda kwa File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- Chagua File -> Mfample -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
Kanusho na Notisi ya Hakimiliki
Taarifa katika hati hii, ikiwa ni pamoja na URL anwani kwa ajili ya kumbukumbu, inaweza kubadilika bila taarifa. Hati hutolewa "kama ilivyo" bila dhamana ya aina yoyote, ikijumuisha dhamana yoyote ya uuzaji, kufaa kwa madhumuni fulani, au kutokiuka, na dhamana yoyote inayorejelewa mahali pengine katika pendekezo lolote, vipimo au masharti.ample. Hakuna jukumu linalochukuliwa katika waraka huu, ikijumuisha dhima yoyote ya ukiukaji wa haki zozote za hataza zinazotokana na matumizi ya taarifa katika hati hii. Hati hii haitoi, kwa estoppel au vinginevyo, leseni yoyote, iliyoelezwa au kudokezwa, kutumia haki zozote za uvumbuzi.
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
Kumbuka
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
Zaidiview
Utangulizi wa bidhaa
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
Vigezo
Utangulizi wa vipengele
Components and interfaces
Kumbuka: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
Ufafanuzi wa Pini
Kielelezo chanya kifuatacho kinaonyesha ESP32-C3-MINI-1-TB kama example:
Vidokezo
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
Utangulizi wa kazi
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
Mwongozo wa Kuchoma Programu
- Kabla ya kuwasha, hakikisha ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB ziko sawa.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
Historia ya Marekebisho
Maswali Yanayoulizwa Mara Kwa Mara
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
Nyaraka / Rasilimali
 |
HONGWEI MICROELECTRONICS ESP32 C3 Moduli za Bodi ya Ukuzaji Mini Wifi BT Bluetooth Moduli [pdf] Mwongozo wa Mtumiaji Moduli za Bodi ya Ukuzaji ya ESP32 C3 Mini Wifi BT Bluetooth Moduli, ESP32 C3, Moduli za Bodi ya Ukuza Mini Wifi BT Bluetooth Moduli, Moduli za Bodi Mini Wifi BT Bluetooth Moduli, Wifi BT Bluetooth Moduli, BT Bluetooth Moduli, Bluetooth Moduli |