HONGWEI مائڪرو اليڪٽرانڪس ESP32 C3 ڊولپمينٽ بورڊ ماڊيولز ميني وائي فائي بي ٽي بلوٽوٿ ماڊيول
وضاحتون
- پيداوار: ESP32 Development Board
- ٺاهيندڙ: Espressif
- مطابقت: Arduino IDE
- Webسائيٽ: https://www.arduino.cc/en/Main/Software
پيداوار جي استعمال جون هدايتون
Download Software and Development Board
- سرڪاري ويب سائيٽ تان Arduino IDE سافٽ ويئر ڊائون لوڊ ڪريو. webمٿي ڏنل سائيٽ.
- سيٽ اپ جي عمل کي شروع ڪرڻ لاءِ Arduino IDE سافٽ ويئر کوليو.
Add ESP32 Development Environment
- Arduino IDE ۾، وڃو File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- چونڊيو File -> مثالample -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
رد ڪرڻ ۽ ڪاپي رائيٽ نوٽيس
هن دستاويز ۾ معلومات، سميت URL حوالن لاء ايڊريس، بغير نوٽيس جي تبديلي جي تابع آهي. دستاويز مهيا ڪئي وئي آهي "جيئن آهي" بغير ڪنهن به قسم جي وارنٽي، بشمول واپار جي ڪنهن به وارنٽي، ڪنهن خاص مقصد لاء فٽنيس، يا غير خلاف ورزي، ۽ ڪنهن به وارنٽي جو حوالو ڏنو ويو آهي ڪنهن به تجويز، وضاحت يا ايس ۾.ampلي. هن دستاويز ۾ ڪابه ذميواري قبول نه ڪئي وئي آهي، بشمول هن دستاويز ۾ معلومات جي استعمال مان پيدا ٿيندڙ ڪنهن به پيٽرن جي حقن جي خلاف ورزي جي ذميواري. هي دستاويز هتي ڏنل نه آهي، اسٽاپل طرفان يا ٻي صورت ۾، ڪنهن به لائسنس، ظاهري يا تقاضا، ڪنهن به دانشورانه ملڪيت جي حقن کي استعمال ڪرڻ لاء.
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
نوٽ
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
مٿانview
پيداوار جو تعارف
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
پيرا ميٽر
اجزاء جو تعارف
Components and interfaces
نوٽ: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
پن جي تعريف
هيٺ ڏنل مثبت مثال ڏيکاري ٿو ESP32-C3-MINI-1-TB هڪ اڳوڻي طور تيampاليزي:
نوٽس
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
فنڪشن جو تعارف
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
پروگرام برننگ گائيڊ
- پاور آن ڪرڻ کان اڳ، پڪ ڪريو ته ESP32-C3-MINI-1-TB ۽ ESP32-C3-MINI-1U-TB برقرار آهن.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
نظرثاني جي تاريخ
اڪثر پڇيا ويا سوال
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
دستاويز / وسيلا
 |
HONGWEI مائڪرو اليڪٽرانڪس ESP32 C3 ڊولپمينٽ بورڊ ماڊيولز ميني وائي فائي بي ٽي بلوٽوٿ ماڊيول [pdf] استعمال ڪندڙ ھدايت ESP32 C3 ڊولپمينٽ بورڊ ماڊيولز ميني وائي فائي بي ٽي بلوٽوٿ ماڊيول، ESP32 C3، ڊولپمينٽ بورڊ ماڊيولز ميني وائي فائي بي ٽي بلوٽوٿ ماڊيول، بورڊ ماڊيولز ميني وائي فائي بي ٽي بلوٽوٿ ماڊيول، وائي فائي بي ٽي بلوٽوٿ ماڊيول، بي ٽي بلوٽوٿ ماڊيول، بلوٽوٿ ماڊيول |