Cov ntsiab lus
zais
HONGWEI MICROELECTRONICS ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module
Specifications
- Khoom: ESP32 Development Board
- Chaw tsim tshuaj paus: Espressif
- Kev sib haum xeeb: Arduino IDE
- Webqhov chaw: https://www.arduino.cc/en/Main/Software
Cov lus qhia siv khoom
Download Software and Development Board
- Rub tawm Arduino IDE software los ntawm official webqhov chaw muab saum toj no.
- Open the Arduino IDE software to start the setup process.
Add ESP32 Development Environment
- Hauv Arduino IDE, mus rau File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- Xaiv File -> Example -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
Tsis lees paub thiab Daim Ntawv Ceeb Toom Copyright
Cov ntaub ntawv hauv daim ntawv no, suav nrog URL chaw nyob rau kev siv, yuav hloov tsis tau ceeb toom. Cov ntaub ntawv yog muab "raws li yog" yam tsis muaj kev lav phib xaub ntawm txhua yam, suav nrog txhua qhov kev lees paub ntawm kev ua lag luam, kev nyab xeeb rau lub hom phiaj tshwj xeeb, lossis tsis ua txhaum cai, thiab ib qho kev lees paub xa mus rau lwm qhov hauv cov lus pom zoo, kev qhia tshwj xeeb lossis sample. Tsis muaj lub luag haujlwm raug lees paub hauv daim ntawv no, suav nrog kev lav phib xaub rau kev ua txhaum cai ntawm cov cai patent tshwm sim los ntawm kev siv cov ntaub ntawv hauv daim ntawv no. Cov ntaub ntawv no tsis tso cai, los ntawm estoppel los yog lwm yam, ib daim ntawv tso cai, qhia los yog implied, siv tej kev txawj ntse muaj cai.
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
Nco tseg
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
Tshajview
Khoom taw qhia
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
Tsis muaj
Kev taw qhia txog Cheebtsam
Components and interfaces
Nco tseg: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
Pin Lo Lus Qhia
Cov lus piav qhia zoo hauv qab no qhia tau hais tias ESP32-C3-MINI-1-TB ua piv txwvample:
Sau ntawv
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
Kev taw qhia txog kev ua haujlwm
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
Program Burning Guide
- Ua ntej lub hwj chim, xyuas kom tseeb tias ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB tsis zoo lawm.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
Kev kho keeb kwm
Cov lus nug nquag
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
Cov ntaub ntawv / Cov ntaub ntawv
 |
HONGWEI MICROELECTRONICS ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module [ua pdf] Cov neeg siv phau ntawv qhia ESP32 C3 Development Board Modules Mini Wifi BT Bluetooth Module, ESP32 C3, Development Board Modules Mini Wifi BT Bluetooth Module, Board Modules Mini Wifi BT Bluetooth Module, Wifi BT Bluetooth Module, BT Bluetooth Module, Bluetooth Module |