Kontni
kache
Modil Komisyon Devlopman HONGWEI MIKWOELEKTRONIK ESP32 C3 Mini Modil Bluetooth Wifi BT
Espesifikasyon
- Pwodwi: ESP32 Development Board
- Manifakti: Espressif
- Konpatibilite: Arduino IDE
- Websit: https://www.arduino.cc/en/Main/Software
Enstriksyon Itilizasyon Pwodwi
Download Software and Development Board
- Telechaje lojisyèl Arduino IDE a nan sit ofisyèl la. websit bay pi wo a.
- Louvri lojisyèl Arduino IDE a pou kòmanse pwosesis konfigirasyon an.
Add ESP32 Development Environment
- Nan Arduino IDE a, ale nan File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- Chwazi File -> Egzample -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
Limit responsabilite nou ak Avi sou Copyright
Enfòmasyon ki nan dokiman sa a, enkli URL adrès pou referans, sijè a chanje san avètisman. Dokimantasyon yo bay "jan yo ye" san okenn garanti, ki gen ladan nenpòt garanti nan komèsan, kondisyon fizik pou yon objektif patikilye, oswa ki pa vyolasyon, ak nenpòt garanti yo refere yon lòt kote nan nenpòt pwopozisyon, spesifikasyon oswa s.ample. Pa gen okenn responsablite sipoze nan dokiman sa a, ki gen ladan nenpòt responsablite pou vyolasyon nenpòt dwa patant ki rive nan itilizasyon enfòmasyon ki nan dokiman sa a. Dokiman sa a pa bay okenn lisans, eksprime oswa implicite, pa estoppel oswa otreman, pou itilize nenpòt dwa pwopriyete entelektyèl.
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
Remak
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
Plis paseview
Entwodiksyon pwodwi
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
Paramèt
Entwodiksyon konpozan
Components and interfaces
Nòt: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
PIN Definisyon
Ilistrasyon pozitif sa a montre ESP32-C3-MINI-1-TB a kòm yon ansyenample:
Nòt
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
Fonksyon entwodiksyon
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
Gid pou boule pwogram
- Anvan limen, asire w ke ESP32-C3-MINI-1-TB ak ESP32-C3-MINI-1U-TB yo entak.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
Istwa revizyon
Kesyon yo poze souvan
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
Dokiman / Resous
 |
Modil Komisyon Devlopman HONGWEI MIKWOELEKTRONIK ESP32 C3 Mini Modil Bluetooth Wifi BT [pdfGid Itilizatè Modil Komisyon Devlopman ESP32 C3 Mini Modil Bluetooth Wifi BT, ESP32 C3, Modil Komisyon Devlopman Mini Modil Bluetooth Wifi BT, Modil Komisyon Konsèy Mini Modil Bluetooth Wifi BT, Modil Bluetooth Wifi BT, Modil Bluetooth BT, Modil Bluetooth |