Kontenut
ħabi
Moduli tal-Bord tal-Iżvilupp HONGWEI MIKROELETTRONIĊI ESP32 C3 Mini Wifi BT Bluetooth Modulu
Speċifikazzjonijiet
- Prodott: ESP32 Development Board
- Manifattur: Espressif
- Kompatibilità: Arduino IDE
- Websit: https://www.arduino.cc/en/Main/Software
Istruzzjonijiet għall-Użu tal-Prodott
Download Software and Development Board
- Niżżel is-softwer tal-Arduino IDE mill-websajt uffiċjali websit ipprovdut hawn fuq.
- Iftaħ is-softwer Arduino IDE biex tibda l-proċess tas-setup.
Add ESP32 Development Environment
- Fl-Arduino IDE, mur fuq File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- Agħżel File -> Eżample -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
Ċaħda ta' responsabbiltà u Avviż dwar id-Drittijiet tal-Awtur
Informazzjoni f'dan id - dokument, inkluż URL indirizzi għal referenza, hija soġġetta għal bidla mingħajr avviż. Id-dokumentazzjoni hija pprovduta "kif inhi" mingħajr garanzija ta' kwalunkwe tip, inkluża kwalunkwe garanzija ta' kummerċjabilità, idoneità għal skop partikolari, jew non-ksur, u kwalunkwe garanzija msemmija x'imkien ieħor fi kwalunkwe proposta, speċifikazzjoni jew sample. L-ebda responsabbiltà ma hija assunta f'dan id-dokument, inkluża kwalunkwe responsabbiltà għall-ksur ta 'kwalunkwe dritt ta' privattiva li jirriżulta mill-użu tal-informazzjoni f'dan id-dokument. Dan id-dokument b'dan ma jagħtix, b'estoppel jew mod ieħor, xi liċenzja, espressa jew impliċita, għall-użu ta' kwalunkwe drittijiet ta' proprjetà intellettwali.
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
Nota
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
Fuqview
Introduzzjoni tal-prodott
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
Parametri
Introduzzjoni tal-komponenti
Components and interfaces
Nota: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
Definizzjoni tal-Pin
L-illustrazzjoni pożittiva li ġejja turi l-ESP32-C3-MINI-1-TB bħala example:
Noti
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
Introduzzjoni tal-funzjoni
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
Gwida tal-Ħruq tal-Programm
- Qabel ma tixgħel, kun żgur li l-ESP32-C3-MINI-1-TB u l-ESP32-C3-MINI-1U-TB huma intatti.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
Storja tar-Reviżjoni
Mistoqsijiet Frekwenti
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
Dokumenti / Riżorsi
 |
Moduli tal-Bord tal-Iżvilupp HONGWEI MIKROELETTRONIĊI ESP32 C3 Mini Wifi BT Bluetooth Modulu [pdfGwida għall-Utent Moduli tal-Bord tal-Iżvilupp ESP32 C3 Mini Wifi BT Bluetooth Modulu, ESP32 C3, Moduli tal-Bord tal-Iżvilupp Mini Wifi BT Bluetooth Modulu, Moduli tal-Bord Mini Wifi BT Bluetooth Modulu, Wifi BT Bluetooth Modulu, BT Bluetooth Modulu, Modulu Bluetooth |