DAIKIN 1005-7 MicroTech Unit Controller Remote

©2025 Daikin Applied, Minneapolis, MN. All rights reserved throughout the world.This document contains the most current product information as of this printing. Daikin Applied Americas Inc. has the right to change the information, design, and construction of the product represented within the document without prior notice. For the most up-to-date product information, please go to www.DaikinApplied.com. ™® MicroTech, Rebel, Maverick II, Roofpak, Pathfinder, Trailblazer, Magnitude, Navigator, and Daikin Applied are trademarks or registered trademarks of Daikin Applied Americas Inc. The following are trademarks or registered trademarks of their respective companies: BACnet from American Society of Heating, Refrigeration and Air-Conditioning Engineers, Inc., and Windows from Microsoft Corporation.

Taw qhia

• Cov ntaub ntawv dav dav
• Phau ntawv no piav qhia txog yuav ua li cas rau nruab thiab ua haujlwm ntawm cov neeg siv kev sib tshuam rau kev siv nrog MicroTech Applied Rooftops thiab kuj Cua thiab Dej-Cooled chiller unit controllers los ntawm Daikin Applied.
  Rau kev txhawb nqa ntawm lub ru tsev lossis chav tswj tus kheej, hu rau Daikin Applied Air Technical Response Center ntawm 800-432-1342 Ib (AAHTechSupport@daikinapplied.com).
• Rau kev txhawb nqa chiller unit, hu rau Daikin Applied Chiller Technical Response Center ntawm 800-432-1342 Ib (CHLTechSupport@daikinapplied.com).
  For technical support on PreciseLine unit controllers, contact the Daikin Applied Air Technical Response Center at 800-432-3928 Ib (ATSTechSupport@daikinapplied.com)

Cov ntaub ntawv khoom

• Cov neeg siv tej thaj chaw deb interface yog tsim los rau cov zaub, kev teeb tsa, teeb tsa, thiab kev tswj hwm ntawm MicroTech unit controllers:

• Ntxiv nrog rau chav ntsuas-mounted controller keypad / zaub, MicroTech chav tswj cov tshuab tuaj yeem nruab nrog cov neeg siv khoom siv chaw taws teeb uas ua haujlwm txog li yim units ntawm ib qho kev sib tshuam. Cov neeg siv tej thaj chaw deb interface muab kev nkag mus rau chav kuaj mob thiab tswj kev hloov kho zoo ib yam li cov khoom siv-mounted controller.

Nta

• Push-and-roll navigation wheel with an 8-line by 30- character display format
• Operating conditions, system alarms, control parameters and schedules are monitored
• RS-485 or KNX interface for local or remote installation
• Power from controller, no additional power supply necessary
• Supports panel mounting and wall mounting

Cov lus ceeb toomDANGER

• Kev phom sij qhia txog qhov xwm txheej txaus ntshai, uas yuav ua rau tuag lossis raug mob hnyav yog tias tsis zam.
• CEEB TOOM Cov lus ceeb toom qhia tias muaj xwm txheej txaus ntshai, uas tuaj yeem ua rau muaj kev puas tsuaj ntawm vaj tse, kev raug mob ntawm tus kheej, lossis kev tuag yog tias tsis zam.
• CEEB TOOM CEEB TOOM qhia tau tias muaj xwm txheej txaus ntshai, uas tuaj yeem ua rau muaj kev raug mob me me lossis khoom puas tsuaj yog tias tsis zam.
• CEEB TOOM Daim ntawv ceeb toom qhia txog kev coj ua tsis cuam tshuam txog kev raug mob lub cev.

Cov ntaub ntawv siv

Tus lej	Tuam txhab	Title	Qhov chaw
YOG 1202	Daikin Applied	Pathfinder Chiller Model AWS Installation, Operation, and Maintenance Manual	www.DaikinApplied.com
YOG 1206	Daikin Applied	Trailblazer Chiller Model AGZ Kev Txhim Kho, Kev Ua Haujlwm thiab Saib Xyuas Phau Ntawv Qhia
YOG 1242	Daikin Applied	Pathfinder Model AWV Chiller Installation, Operation, and Maintenance Manual
TIAB SA 1033	Daikin Applied	Magnitude Model WME, B vintage Sib Nqus Cov Kabmob Centrifugal Chiller Installation, Kev Ua Haujlwm, thiab Kev Tswj Xyuas Phau Ntawv
YOG 1264	Daikin Applied	Navigator Model WWV/TWV Water-cooled Chiller Installation, Operation, and Maintenance Manual
YOG 1243	Daikin Applied	Trailblazer Chiller Qauv AMZ
AWM 1382	Daikin Applied	Rebel Commercial Packaged Rooftop Systems, Kev khiav hauj lwm thiab kev saib xyuas phau ntawv
AWM 1373	Daikin Applied	Rebel Applied Rooftop Systems, Kev khiav hauj lwm thiab kev saib xyuas phau ntawv
AWM 1357	Daikin Applied	PreciseLine Air Handler, Kev Ua Haujlwm thiab Kev Tswj Xyuas

Cov ntaub ntawv tseem ceeb

General

• Daim duab 1 qhia cov ntsiab lus ntawm cov chaw taws teeb neeg siv interface kho vajtse tsim.

Tag nrho lub cev layout muaj xws li:

• 5.7 × 3.8 × 1 in (144 × 96 × 26 mm) size
• 9.1 oz (256.7 g) weight, excluding packaging
• Yas tsev

Hwj chim

• Supplied by the MicroTech unit controller for direct connection
• Separate 24V DAC power supply, optional for daisy chain connections, Max 85 mA
• CEEB TOOM: Hu rau Daikin Applied Air Technical Response Center ntawm 800-432-1342 Ib (AAHTechSupport@daikinapplied.com) lossis Chiller Technical Response Center ntawm 800-432-1342 Ib (CHLTechSupport@daikinapplied.com) yog xav tau ib lub hwj chim cais.

Zaub

• LCD type FSTN
• Resolution dot-matrix 96 x 208
• Backlight blue or white, user selectable

Ib puag ncig tej yam kev mob

• Operation EC 721-3-3
• Temperature -40…158°F (-40…+70°C)
• Restriction LCD -4…140°F (-20…+60°C)
• Restriction Process-Bus -13…158°F (-25….+70°C)
• Humidity < 90% RH (no condensation)
• Air pressure Min. 10.2 psi (700 hPa), corresponding to max. 9843 ft (3000 m) above sea level

Kev teeb tsa

• Kev teeb tsa ua ntej
• Thov nco ntsoov cov hauv qab no ua ntej mounting thiab txhim kho cov neeg siv tej thaj chaw deb interface.

Kev xav txog qhov chaw

• Qhov chaw ntawm cov neeg siv tej thaj chaw deb yog qhov tsim nyog los xyuas kom meej tias kev ua haujlwm zoo. Thaum xaiv qhov chaw, zam cov hauv qab no:
• Locations that are outside the operating temperature and humidity range (see Environmental Conditions.)
• Mounting on rooftop without a careful site evaluation and confirmation
• Walls that are subject to high vibration
•  Areas with high humidity exterior walls and other walls that have a temperature differential between the two sides
• Areas that are close to heat sources such as sunlight, appliances, concealed pipes, chimneys, or other heat-generating equipment.

Mounting Nto

• Rau kev teeb tsa saum npoo, mount tus neeg siv tej thaj chaw deb rau qhov chaw tiaj tus xws li cov ntawv pob zeb lossis plaster, tswj vaj huam sib luag, lossis lub thawv hluav taws xob sib txuas.
• If mounting onto sheet rock or plaster, use anchors, if necessary
• For mounting in the unit controller panel, electrical junction box, or other metal enclosure, use the supplied magnets.

Yam khoom

Kev piav qhia	Tshooj Naj Npawb
MicroTech Chaw Taws Teeb Tus Neeg Siv Khoom	1934080031,2
Connectors (using CE+ CE- connection option)	193410302

1. Note that part number 193408001 is no longer available.
2. For daisy-chaining unit controllers together, a 2-pin connector (PN 193410302), is required for each unit controller. The 2-pin connector is not required for direct-connecting unit controllers.
3. Txhawm rau nrhiav koj qhov chaw ua haujlwm hauv cheeb tsam, mus saib www.DaikinApplied.com los yog hu rau 800-37PARTS (800-377-2787 Ib).
4. Mounting thiab txuas
5. Cov lus hauv qab no piav qhia txog yuav ua li cas txhawm rau txhim kho cov neeg siv khoom siv chaw taws teeb thiab txuas mus rau ib lossis ntau dua MicroTech unit controllers.
6. Electrostatic discharge hazard. Can cause equipment damage. This equipment contains sensitive electronic components that may be damaged by electrostatic discharge from your hands. Before you handle a communication module, you need to touch a grounded object, such as the metal enclosure, in order to discharge the electrostatic potential from your body.
7. WARNING Electric shock hazard. Can cause personal injury or equipment damage. This equipment must be properly grounded.

Only personnel knowledgeable in the operation of the equipment being controlled must perform connections and service to the unit controller.

1.  Remove plastic cover (Figure 2).
2. Mount the remote user interface. The remote user interface can be either panel-mounted or wall-mounted as shown in Figure 3. See Figure 4 and Figure 5 for terminal connections for each of the mounting locations.

Txuas tus neeg siv tej thaj chaw deb interface

1. Txuas cov neeg siv tej thaj chaw deb mus rau MicroTech unit controller tuaj yeem ua tau ob txoj hauv kev:
2. 1. Daisy-chain txuas rau ntau li yim units.
3. 2. Direct connection to a single unit controller. Connection and wiring instructions in each case are described in the following section. See Table 1 for wire sizing and distance limitations.
4. NOTE: Power is supplied by the MicroTech unit controller. If a separate 24V power supply is desired, please contact either the Daikin Applied Air Technical Response Center at (800) 432- 1342 (AAHTechSupport@daikinapplied.com) or the Chiller Technical
5. Response Center at 800-432-1342 Ib (CHLTechSupport@daikinapplied.com).

Daisy-Chain Connection Establish a physical connection from the remote user interface to the MicroTech unit controller.

1.  Connect a twisted pair wire to the CE + and CE – pins of each unit controller and remote user interface (see Figure 4 and Figure 5).
2. Daisy-chain up to eight MicroTech unit controllers to a single remote user interface. See Figure 5 for wiring details. Note the wire size and distance limitations provided in Table 1.
3. Cycle power to each MicroTech unit controller once the wiring of the remote user interface is complete.
   NOTE: Downloading and communication using the daisy chain connection may be slower than for the RJ45 (Ethernet) direct connection.

Table 1: Wiring Specifications

Kev sib txuas hauv npav	CE+, CE-, not interchangeable
Terminal	2-screw connector
Max. ntev	1000 ft (305 m)
Hom kab
Wiring distance up to 500 ft	Twisted pair, shielded cable 16 AWG
Wiring distance between 500 – 1000 ft	Twisted pair, shielded cable 14 AWG
Cov kab hluav taws xob ntau tshaj 1000 ft	Not currently supported. Contact the appropriate Daikin Applied Technical Response Center for assistance.

Kev sib txuas ncaj qha

1. Cov neeg siv tej thaj chaw deb tuaj yeem txuas ncaj qha mus rau ib qho MicroTech unit controller dhau tus qauv RJ45 (Ethernet) kev sib txuas.

Txheej txheem

1. Locate the connector location as shown in Figure 6
2. Follow Figure 6 for connection details. Note the distance limitations provided.
3. Cycle power to the unit(s) once the wiring of the remote user interface is complete.
4. CEEB TOOM: Lub hwj chim yog muab los ntawm chav tswj hwm. Yog xav tau ib qho 24V fais fab mov, thov hu rau Daikin Applied Air Technical Response Center ntawm 800-432-1342 Ib (AAHTechSupport@daikinapplied. com) lossis Chiller Technical Response Center ntawm 800-432-1342 Ib (CHLTechSupport@daikinapplied.com).

Kev ua haujlwm

• Siv cov neeg siv tej thaj chaw deb interface

Kho vajtse nta

• Cov neeg siv tej thaj chaw deb keyboard keypad / zaub muaj 8-kab los ntawm 30 lub cim zaub, lub log "rub thiab yob" navigation log, thiab peb lub nyees khawm: Tswb, Ntawv qhia zaub mov, thiab rov qab (Daim duab 7).
• Turn the navigation wheel clockwise (right) or counterclockwise (left) to navigate between lines on a screen and also to increase and decrease changeable values when editing. Press down on the wheel to use it as an Enter button.
• Press the Back button to display the previous page.
• Press the Home button to return to the main screen from the current page.
• Press the Alarm button to view lub Alarm Lists menu.

Keypad/Display Features

• The first line on each page includes the page title and the line number to which the cursor is currently “pointing.” The line numbers are X/Y to indicate line number X of a total of Y lines for that page. The left most position of the title line includes an “up” arrow to indicate there are pages “above” the currently displayed items, a “down” arrow to indicate there are pages “below” the currently displayed items or an “up/down” arrow to indicate there are pages “above and below” the currently displayed page. Each line on a page can contain status-only information or include changeable data fields. When a line contains status-only information and the cursor is on that line, all but the value field of that line is highlighted meaning the text is white with a black box around it. When the line contains a changeable value and the cursor is at that line, the entire line is highlighted.
• Txhua kab ntawm nplooj ntawv kuj tseem tuaj yeem txhais tau tias yog "dhia" kab, lub ntsiab lus thawb lub log navigation yuav ua rau "dhia" rau nplooj ntawv tshiab. Ib tug xub tshwm nyob rau sab xis ntawm txoj kab los qhia tias nws yog kab "dhia" thiab tag nrho cov kab tau pom tseeb thaum tus cursor nyob ntawm kab ntawd.
• CEEB TOOM: Tsuas yog cov ntawv qhia zaub mov thiab cov khoom uas muaj feem xyuam rau qhov tshwj xeeb chav tsev teeb tsa tau tshwm sim.

Tswb
The Alarm Details Menu includes active alarm and alarm
log information. See Figure 8 for an example ntawm lub tswb nrov. Kuj xa mus rau qhov tsim nyog MicroTech chav tswj tswj kev ua haujlwm Manual (www.DaikinApplied.com) rau kev xaiv tswb.

Cov passwords
Unit controller menu functions muaj ntau theem ntawm kev nkag tau yooj yim. Muaj peev xwm view thiab/lossis hloov chaw nyob ntawm qhov nkag mus ntawm tus neeg siv thiab tus password nkag. Muaj plaub theem ntawm kev nkag mus rau tus password:

1. 1. Tsis muaj tus password.
   2. Qib 2. Qib siab tshaj ntawm kev nkag. Yog tias tsis nkag mus rau tus password, tus neeg siv tsuas yog nkag mus rau cov ntawv qhia zaub mov yooj yim xwb. Nkag mus rau Qib 2 lo lus zais (6363) tso cai rau kev nkag mus zoo ib yam li Qib 4 nrog rau qhov sib ntxiv ntawm Chav Tsev Configuration Menu.
   3. Theem 4. Nkag mus rau Qib 4 lo lus zais (2526) tso cai rau kev nkag mus zoo ib yam li Qib 6 nrog ntxiv ntawm Pawg Neeg Saib Xyuas Cov Ntawv Qhia, Kev Tswj Xyuas Kev Tswj, thiab Pab Pawg Menu.
   4. Theem 6. Nkag mus rau Qib 6 tus password (5321) tso cai rau nkag mus rau Cov Ntawv Teev Npe Tswb, Cov Ntawv Qhia Ceev, thiab cov View/Set Unit Menus pab pawg.
2. Alarms can be acknowledged without entering a
   tus password.
   Nkag mus rau nplooj ntawv Password
   The main password page is displayed when the remote user
   interface display (HMI) is first accessed.
   1. Nias lub khawm Tsev.
   2. Press the Back button multiple times, or if the keypad/
   display has been idle longer than the Password Timeout
   (default 10 minutes).
   The main password page provides access to enter a
   password, access the Quick Menu, view the current Unit
   State, access the alarm lists or view cov ntaub ntawv hais txog lub
   unit (Figure 9).

• MicroTech unit controller Operation Manual (www.DaikinApplied.com) muab cov ntaub ntawv ntxiv txog cov passwords, suav nrog kev siv Navigation thiab Kho kom raug hom teeb tsa kom nkag mus thiab hloov cov passwords.

Kev teeb tsa

• The following section describes how to set up the HMI so that it can be used to display, configure, or change unit parameters.
• Refer to the applicable MicroTech unit controller Operation
• Manual for a detailed description of chiller or rooftop sequence of operation and keypad menu structure when configuring the unit via the remote user interface (www.DaikinApplied.com).
• CEEB TOOM: Txhawm rau hloov pauv ntawm chav nyob, nias lub pob Rov qab rau tsib vib nas this kom rov qab mus rau lub vijtsam tseem ceeb.

Customize tus neeg siv nyiam

1.  Turn power on to the unit controller(s). Power to the remote user interface is provided automatically from the MicroTech unit controller(s) through the RJ45 (Ethernet) direct connection.
2.  The main screen with HMI Settings and Controller List appears (Figure 10). Use the HMI Settings screen to change options for backlight color, backlight turn off time, contrast, and brightness.
3. CEEB TOOM: Lub vijtsam tseem ceeb tuaj yeem nkag tau txhua lub sijhawm los ntawm nias lub Tsev khawm rau tsib vib nas this.
4. Press the navigation wheel to select the HMI Settings menu, if desired.

Synchronize nrog MicroTech Unit Controller

1. Nias lub log navigation xaiv lub Controller List screen (Daim duab 11).

• The Controller List automatically updates each time the remote user interface is powered up so that information is synchronized from the main unit controller.
• The Controller List screen displays the unit controller(s) connected to the remote user interface. This screen allows the user to select between units, if more than one unit is connected to the remote user interface

CEEB TOOM: Ib chav tsev nkaus xwb tshwm rau ntawm qhov screen raws li kev xaiv tau yog tias tsuas yog ib chav tswj hwm txuas nrog rau cov neeg siv tej thaj chaw deb.

• Turn the navigation wheel clockwise and then press down to select the desired unit.
• The Information screen appears as the remote user interface performs a download sequence to import the necessary information from the main unit controller. A status bar appears on the Downloading the Objects screen to indicate that the download is in process (Figure 12).
• CEEB TOOM: Xa mus rau ntu Kev daws teeb meem yog tias cov neeg siv tej thaj chaw deb cuam tshuam zoo li "khov" thaum lub sijhawm pib rub tawm.

1. Once the first unit has been downloaded, select the next unit controller, if applicable. The download process is required for each unit controller connected to the remote user interface.
2.  Press the Home button for five seconds to return to the main screen.
3. NOTE: The Downloading the Objects sequence generally takes a minute or less when direct-connecting to a single unit. However, the downloading sequence takes longer when using the daisy-chain connection. When the download sequence is complete, the
4. Main screen of the unit controller appears on the remote user interface. At this point, the remote user interface and unit controller are synchronized.
5.  Access and adjust the same parameters that are available via the unit controller keypad/display. Refer to the applicable MicroTech unit controller Operation Manual for the keypad menu structure and detailed description the unit controller sequence of operation (www.DaikinApplied.com).

Cov txheej txheem txhim kho firmware

1. Ua raws li cov kauj ruam no los hloov kho cov neeg siv tej thaj chaw deb interface (HMI) firmware (.bin) file.
2. NOTE: The upgrade procedure requires the use of an SD memory card no larger than 8GB with a FAT32 file system format.
3. CEEB TOOM: Kev hloov kho teb tsis tuaj yeem ua tau ntawm cov chav nyob nrog v1.07 firmware. Hu rau Daikin Applied Air Technical Response Center ntawm 800-432-1342 Ib (AAHTechSupport@daikinapplied.com) or the Chiller Technical Response Center at (800) 432- 1342 (CHLTechSupport@daikinapplied.com) kev pab.

Kev daws teeb meem

1. Tshooj lus no muaj cov ntaub ntawv muaj txiaj ntsig, cov lus nug nquag nug, thiab lwm cov lus qhia ntsig txog cov neeg siv khoom siv nyob deb.

Table 2: Phau Ntawv Qhia Txog Kev Teeb Meem

Teeb meem	Kev daws
During the initial download sequence, the keypad/display appears to freeze up and a “Loading….. Lost Connection” message appears.	The remote user interface is stuck in the downloading sequence due to incompatibility with v1.07 application software. The remote user interface must be updated to v10.22 or newer application software. Contact Daikin Applied Air Technical Response at 800-432-1342 Ib rau cov lus qhia ntxiv.
The remote user interface has been connected to the MicroTech unit controller but the display remains blank after power-up.	Verify that the unit controller has power. Check wiring from the unit controller to the remote user interface. Note that inputs and outputs are polarity-sensitive.
Cov neeg siv tej thaj chaw deb interface muaj kev sib txuas lus tsis zoo.	The site may have “dirty power” or electrical noise causing loss of communication. See below for further instruction.

1. Access the Power Bus menu on the MicroTech unit controller by the following keypad menu path: service menu/HMI setup/PBusPwrSply=ON (default). See Figure 13.
2.  Set the default Power Bus supply.
3. For the first and last units on the daisy-chain trunk, leave the Power Bus supply at the default of ON.
4. For all other units within the daisy chain trunk, set the Power Bus supply to the OFF position.

Cov lus qhia pab tau
Cov kws tshaj lij pabcuam feem ntau pom tau tias nws yooj yim kom muaj ob lub keyboards / cov duab txuas nrog rau ib chav tswj hwm. Siv cov kev teeb tsa split-screen ua rau nws ua tau view multiple menu items at the same time during start-up and also for diagnostic purposes. → Simply hook up the first remote user interface with an RJ45 direct connection, and then use a two-wire twisted  pair cable to connect to the second keypad/display.

Kev kho keeb kwm

Kev kho dua	Hnub tim	Hloov
IB 1005	Lub Ib Hlis 2010	Kev tso tawm thawj zaug
IB 1005-1	Cuaj hlis 2010	Added Daikin Trailblazer® chiller model AGZ-D
IB 1005-2	Peb Hlis 2012	Added Rebel® packaged rooftop model DPS. Updated Figure 3 with labels and connector cables.
IB 1005-3	Kaum Ib Hlis 2016	Added models AWV Pathfinder® chiller and AGZ-E Trailblazer® chiller, added RJ45 direct connection option, corrected bus wiring distance limitations, Troubleshooting section, Daikin branding and formatting updates
IB 1005-4	Lub Ib Hlis 2018	Ntxiv WME & WWV chiller qauv.
IB 1005-5	Lub Yim Hli 2019	Updated connections
IB 1005-6	Lub Rau Hli 2023	Branding thiab lwm yam kev hloov kho tshiab.
IB 1005-7	Lub Xya Hli 2025	Updated contact information, added Daikin Trailblazer® chiller model AMZ, and removed model lists from front cover.

 

Daikin Applied Training thiab Development
Now that you have invested in modern, efficient Daikin Applied equipment, its care should be a high priority. For training information on all Daikin Applied HVAC products, please visit us at www. DaikinApplied.com and click on Training, or call 540-248-9646 Ib thiab nug rau Lub Tsev Haujlwm Saib Xyuas Kev Kawm.

Warranty
Tag nrho cov khoom siv Daikin Applied yog muag raws li nws cov qauv lus thiab cov xwm txheej ntawm kev muag khoom, suav nrog Cov Khoom Siv Txwv Txwv. Nrog koj tus neeg sawv cev Daikin Applied hauv zos kom paub meej txog kev lees paub. Txhawm rau nrhiav koj tus neeg sawv cev Daikin Applied hauv zos, mus rau www.DaikinApplied.com.

Kev pab cuam tom qab muag
Txhawm rau nrhiav koj qhov chaw ua haujlwm hauv cheeb tsam, mus saib www.DaikinApplied.com lossis hu rau 800-37PARTS (800-377-2787 Ib). Txhawm rau nrhiav koj lub chaw pabcuam hauv zos, mus saib www.DaikinApplied.com los yog hu 800-432-1342 Ib. Cov ntaub ntawv no muaj cov ntaub ntawv cov khoom lag luam tam sim no tshaj plaws ntawm kev luam ntawv no. Yog xav paub ntxiv txog cov khoom lag luam tshiab, thov mus rau www.DaikinApplied.com.Products manufactured in an ISO Certified Facility.

FAQS

Q: Muaj pes tsawg units tuaj yeem siv cov chaw taws teeb tswj kev tswj hwm?

A: The remote user interface can handle up to eight units per interface.

Is a separate 24V power supply necessary for direct connection?

Tsis yog, lub zog yog muab los ntawm MicroTech unit controller.

What type of cable is recommended for daisy-chain connection?

Daikin Applied feem ntau pom zoo kom siv twisted khub, 16 AWG shielded cable mus txog 500 ft thiab 14 AWG los ntawm 500 mus rau 1000 ft. Hu rau lub chaw tsim nyog Technical Response Center rau cov ntawv thov uas yuav tsum tau ncua ntev.

Kuv yuav paub li cas yog tias lossis thaum twg kuv yuav tsum tau hloov kho cov chaw taws teeb siv interface (HMI) firmware files?

If the remote user interface seems to freeze during initial download process If wiring has been confirmed (inputs and outputs are polarity sensitive) and HMI is not responding See Firmware Upgrade Procedure section for details.

Yuav ua li cas yog tias kuv xav hloov kho MicroTech unit controller firmware?
Hu rau Daikin Applied Air Technical Response Center ntawm 800-432-1342 Ib (AAHTechSupport@daikinapplied.com) or the Chiller Technical Response Center at 800-432-1342 Ib (CHLTechSupport@daikinapplied.com) kev pab.

Cov ntaub ntawv / Cov ntaub ntawv

DAIKIN 1005-7 MicroTech Unit Controller Chaw Taws Teeb Tus Neeg Siv Khoom [ua pdf] Phau ntawv qhia 1005-7 MicroTech Unit Controller Remote User Interface, 1005-7, MicroTech Unit Controller Remote User Interface, Controller Remote User Interface, Remote User Interface, User Interface

Cov ntaub ntawv

• Cov neeg siv phau ntawv