Beijer GT-1428 Digital Input Output Module

8 digital input (sink), 8 digital output (source), 24 VDC, 0.5 A, diagnostic, cage clamp, 18 pt m tasha
Doc ID: 137670
2025-02-20

Haƙƙin mallaka © 2025 Beijer Electronics AB. An kiyaye duk haƙƙoƙi. Bayanin da ke cikin wannan takarda yana iya canzawa ba tare da sanarwa ba kuma ana bayar da shi kamar yadda yake a lokacin bugawa. Beijer Electronics AB yana da haƙƙin canza kowane bayani ba tare da sabunta wannan ɗaba'ar ba. Beijer Electronics AB ba ta da alhakin kowane kurakurai da ka iya bayyana a cikin wannan takarda. Duk examples a cikin wannan takarda an yi niyya ne kawai don inganta fahimtar ayyuka da sarrafa kayan aiki. Beijer Electronics AB ba zai iya ɗaukar kowane alhaki ba idan waɗannan tsoffinampAna amfani da les a ainihin aikace-aikace. A ciki view daga cikin nau'ikan aikace-aikacen wannan software, masu amfani dole ne su sami isasshen ilimi da kansu don tabbatar da cewa an yi amfani da shi daidai a takamaiman aikace-aikacen su. Mutanen da ke da alhakin aikace-aikacen da kayan aiki dole ne da kansu su tabbatar da cewa kowane aikace-aikacen ya dace da duk buƙatun da suka dace, ƙa'idodi, da dokoki dangane da tsari da aminci. Beijer Electronics AB ba za ta karɓi wani alhaki ga duk wani lahani da ya faru yayin shigarwa ko amfani da kayan aiki da aka ambata a cikin wannan takarda. Beijer Electronics AB ya haramta duk gyare-gyare, canje-canje, ko canza kayan aiki.

Babban ofishi
Beijer Electronics AB girma
Akwatin 426
201 24 Malmö, Sweden
www.beijerelectronics.com / +46 40 358600

Game da Wannan Jagoran

This manual contains information on the software and hardware features of the Beijer Electronics GT-1428 Digital Input/Output Module. It provides in-depth specifications, guidance on installation, setup, and usage of the product.

Alamomin da Aka Yi Amfani da su a cikin Wannan Jagoran
Wannan ɗaba'ar ya haɗa da Gargaɗi, Tsanaki, Bayanan kula, da gumaka masu mahimmanci inda ya dace, don nuna masu alaƙa da aminci ko wasu mahimman bayanai. Ya kamata a fassara alamomin da suka dace kamar haka:

GARGADI
Alamar faɗakarwa tana nuna yanayi mai yuwuwar haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da mutuwa ko mummunan rauni da babban lahani ga samfurin.

HANKALI
The Caution icon indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury and moderate damage to the product.

NOTE
Alamar bayanin kula tana faɗakar da mai karatu zuwa ga gaskiya da yanayi masu dacewa.

MUHIMMANCI
Muhimman alamar yana nuna mahimman bayanai.

Tsaro

• Kafin amfani da wannan samfurin, da fatan za a karanta wannan jagorar da sauran littattafan da suka dace a hankali. Biya cikakken hankali ga umarnin aminci!
• Babu wani abu da Beijer Electronics zai kasance da alhakin ko alhakin lalacewa sakamakon amfani da wannan samfurin.
• Hotunan, examples da zane-zane a cikin wannan jagorar an haɗa su don dalilai na misali. Saboda yawancin masu canji da buƙatun da ke da alaƙa da kowane takamaiman shigarwa, Beijer Electronics ba zai iya ɗaukar nauyi ko alhaki don ainihin amfani dangane da tsohonamples da zane-zane.

Takaddun shaida na samfur
Samfurin yana da takaddun shaida masu zuwa.

Janar Bukatun Tsaro

GARGADI

• Do not assemble the products and wires with power connected to the system. Doing so causes an “arc flash”, which can result in unexpected, dangerous events
  (burns, fire, flying objects, blast pressure, sound blast, heat).
• Kar a taɓa tubalan tasha ko na'urorin IO lokacin da tsarin ke gudana. Yin hakan na iya haifar da girgiza wutar lantarki, gajeriyar kewayawa ko rashin aiki na na'urar.
• Never let external metallic objects touch the product when the system is running. Doing so may cause an electric shock, a short circuit or malfunction of the device.
• Kada ka sanya samfurin kusa da abu mai ƙonewa. Yin hakan na iya haifar da gobara.
• Duk aikin wayoyi ya kamata injiniyan lantarki ya yi.
• When handling the modules, ensure that all persons, the workplace, and the packaging are well grounded. Avoid touching conductive components, the modules contain electronic components that may be destroyed by electrostatic discharge.

HANKALI

• Kada a taɓa amfani da samfurin a cikin yanayin zafi sama da 60 ℃. Guji sanya samfurin a cikin hasken rana kai tsaye.
• Kada a taɓa amfani da samfurin a cikin mahallin sama da 90% zafi.
• Yi amfani da samfur koyaushe a cikin mahalli tare da gurɓataccen digiri 1 ko 2.
• Yi amfani da madaidaicin igiyoyi don yin wayoyi.

Game da Tsarin G-jerin

Tsarin ya ƙareview

• Module Adaftar hanyar sadarwa - The network adapter module forms the link between the field bus and the field devices with the expansion modules. The connection to different field bus systems can be established by each of the corresponding network adapter modules, e.g., for MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial etc.
• Module Fadada - Nau'in nau'ikan haɓakawa: Digital IO, Analog IO, da kayayyaki na musamman.
• Saƙo - Tsarin yana amfani da saƙo iri biyu: Saƙon sabis da saƙon IO.

IO Tsarin Taswirar Bayanai
An expansion module has three types of data: IO data, configuration parameters, and memory registers. The data exchange between the network adapter and the expansion modules is made via IO process image data by internal protocol.

Data flow between the network adapter (63 slots) and the expansion modules

The input and output image data depend on the slot position and the data type of the expansion slot. The ordering of the input and output process image data is based on the expansion slot position. Calculations for this arrangement are included in the manuals for the network adapter and programmable IO modules.

Ingantattun bayanan siga ya dogara da samfuran da ake amfani da su. Domin misaliample, na'urorin analog suna da saitunan ko dai 0-20 mA ko 4-20 mA, kuma na'urorin zafin jiki suna da saituna kamar PT100, PT200, da PT500. Takaddun bayanai na kowane nau'i yana ba da bayanin bayanan siga.

Ƙayyadaddun bayanai

Ƙayyadaddun Muhalli

Yanayin aiki	-20°C – 60°C
UL zafin jiki	-20°C – 60°C
Yanayin ajiya	-40°C – 85°C
Dangi zafi	5%-90% ba condensing
Yin hawa	DIN dogo
Shock aiki	IEC 60068-2-27 (15G)
Juriya na rawar jiki	IEC 60068-2-6 (4 g)
Fitar masana'antu	EN 61000-6-4: 2019
Kariyar masana'antu	EN 61000-6-2: 2019
Matsayin shigarwa	A tsaye da a kwance
Takaddun shaida na samfur	CE, FCC, UL

Gabaɗaya Bayani

Rashin wutar lantarki	Max. 55mA @ 5 VDC
Kaɗaici	I/O zuwa dabaru: Keɓewar Photocoupler
UL filin iko	Ƙarar voltage: 24 VDC maras kyau, aji 2
Ƙarfin filin	Ƙarar voltage: 24 VDC mai lamba Voltage kewayon: 15-30 VDC Rashin wutar lantarki: 40mA @ 24 VDC
Waya	I/O na USB max. 0.75 mm2 (AWG 18)
Nauyi	63g ku
Girman module	12 x 109 mm x 70 mm

Girma

Girman Module (mm)

Ƙididdigar shigarwa

Abubuwan shigarwa kowane module	Nau'in nutse maki 8
Manuniya	Matsayin shigarwar kore 8
On-jihar voltage	24 VDC mara kyau 15 - 30 VDC @ 60 ℃
Yanayin halin yanzu	2.25 MA @ 24 VDC 3 MA @ 30 VDC
Off-jihar voltage	8 VDC @ 25 ℃
Jinkirin siginar shigarwa	KASHE zuwa: Max. 0.3 ms KUNNA zuwa KASHE: Max. 0.3 ms
Tace ta shiga	Daidaitacce, har zuwa 10 ms
Ƙunƙarar shigar da ƙima	10.2K Ω na al'ada

Ƙimar fitarwa

Abubuwan da aka fitar a kowane module	Nau'in tushen maki 8
Manuniya	Matsayin shigarwar kore 8
Fitarwa voltage kewayon	24 VDC mara kyau 15 - 30 VDC @ 60 ℃
On-jihar voltagda drop	0.3 VDC @ 25 ℃ 0.6 VDC @ 60 ℃

On-jihar min. halin yanzu	Min. 1 mA
yoyon waje na halin yanzu	Max. 10 ku
Jinkirin siginar fitarwa	KASHE zuwa: Max. 0.1 ms KUNNA zuwa KASHE: Max. 0.35 ms
Fitar da ƙimar halin yanzu	Max. 0.5 A kowane tashar / Max. 4 A kowace naúrar
Kariya	Over current limit: 2.2 A @ 25 °C each channel Thermal shutdown: 175 °C Kariyar gajeriyar hanya

Tsarin Waya

Fil babu.	Bayanin sigina
0	Tashar shigarwa 0
1	Fitar tashar 0
2	Tashar shigarwa 1
3	Fitar tashar 1
4	Tashar shigarwa 2
5	Fitar tashar 2
6	Tashar shigarwa 3
7	Fitar tashar 3
8	Tashar shigarwa 4
9	Fitar tashar 4
10	Tashar shigarwa 5
11	Fitar tashar 5
12	Tashar shigarwa 6
13	Fitar tashar 6
14	Tashar shigarwa 7
15	Fitar tashar 7
16	Na gama gari (Ikon Filin 0V)
17	Na gama gari (Ikon Filin 24V)

Alamar LED

LED no.	Ayyukan LED / bayanin	LED launi
0 (left side)	INPUT tashar 0	Kore
1	INPUT tashar 1	Kore
2	INPUT tashar 2	Kore
3	INPUT tashar 3	Kore
4	INPUT tashar 4	Kore
5	INPUT tashar 5	Kore
6	INPUT tashar 6	Kore
7	INPUT tashar 7	Kore
0 (right side)	OUTPUT tashar 0	Kore
1	OUTPUT tashar 1	Kore
2	OUTPUT tashar 2	Kore
3	OUTPUT tashar 3	Kore
4	OUTPUT tashar 4	Kore
5	OUTPUT tashar 5	Kore
6	OUTPUT tashar 6	Kore
7	OUTPUT tashar 7	Kore

Matsayin Tashoshin LED
LED no. 0-7 (left side)

Matsayi	LED	Nuni
Babu sigina	Kashe	Aiki na al'ada
Kan sigina	Kore	Aiki na al'ada

LED no. 0-7 (right side) 

Matsayi	LED	Nuni
Babu sigina	Kashe	Aiki na al'ada
Kan sigina	Kore	Aiki na al'ada
Laifin tashar	Filashi	Short to GND Over current Sama da zafin jiki

Taswirar Bayanai A cikin Teburin Hoto

Bayanan shigarwar module

D7	D6	D5	D4	D3	D2	D1	D0
D15	D14	D13	D12	D11	D10	D9	D8

Shigar da ƙimar hoton

Bit no.	Bit 7	Bit 6	Bit 5	Bit 4	Bit 3	Bit 2	Bit 1	Bit 0
Baiti 0	D7	D6	D5	D4	D3	D2	D1	D0
Baiti 1	D15	D14	D13	D12	D11	D10	D9	D8

Ƙimar hoton da aka fitar

Bit no.	Bit 7	Bit 6	Bit 5	Bit 4	Bit 3	Bit 2	Bit 1	Bit 0
Baiti 0	D7	D6	D5	D4	D3	D2	D1	D0

Output module data

D7

D6

D5

D4

D3

D2

D1

D0

Bayanan Sigar

Tsawon siga mai inganci: 4 bytes

Bit no.	Bit 7	Bit 6	Bit 5	Bit 4	Bit 3	Bit 2	Bit 1	Bit 0
Baiti 0	Fault action (ch0 – ch7) 0: Fault value 1: Hold last state
Baiti 1	Fault value (ch0 – ch7) 0: Off 1: ku
Baiti 2	Ƙimar tace shigarwa: 0 - 10 (raka'a: ms)
Baiti 3	Ajiye

Saitin Hardware

HANKALI

• Koyaushe karanta wannan babin kafin shigar da tsarin!
• Zafi mai zafi! Fuskar gidan na iya zama zafi yayin aiki. Idan ana amfani da na'urar a cikin yanayin yanayin zafi, koyaushe bari na'urar ta yi sanyi kafin ta taɓa ta.
• Yin aiki akan na'urori masu ƙarfi na iya lalata kayan aiki! Koyaushe kashe wutar lantarki kafin aiki akan na'urar.

Bukatun sararin samaniya
The following drawings show the space requirements when installing the G-series modules. The spacing creates space for ventilation and prevents conducted electromagnetic interference from influencing the operation. The installation position is valid vertically and horizontally. The drawings are illustrative and may be out of proportion.

HANKALI
RASHIN bin buƙatun sarari na iya haifar da ɓata samfurin.

Dutsen Module zuwa DIN Rail
Babi masu zuwa suna bayyana yadda ake hawan tsarin zuwa dogo na DIN.

HANKALI
Dole ne a daidaita tsarin zuwa layin dogo na DIN tare da maƙallan kullewa.

Dutsen GL-9XXX ko GT-XXXX Module
Umurnai masu zuwa sun shafi waɗannan nau'ikan samfura:

• GL-9XXX
• GT-1XXX
• GT-2XXX
• GT-3XXX
• GT-4XXX
• GT-5XXX
• GT-7XXX

Modulolin GN-9XXX suna da levers na kulle guda uku, ɗaya a ƙasa da biyu a gefe. Don umarnin hawa, koma zuwa Module Dutsen GN-9XXX.

Module Dutsen GN-9XXX
Don hawa ko saukar da adaftar cibiyar sadarwa ko tsarin IO mai tsari tare da sunan samfurin GN-9XXX, don ex.ampGN-9251 ko GN-9371, duba waɗannan umarnin:

Tushen Tasha Mai Cirewa
Don hawa ko saukar da toshe mai cirewa (RTB), duba umarnin da ke ƙasa.

Haɗa igiyoyi zuwa Toshe Tasha Mai Cirewa
Don haɗa/cire haɗin igiyoyi zuwa/daga cikin toshe mai cirewa (RTB), duba umarnin da ke ƙasa.

GARGADI
Koyaushe amfani da shawarar samarwa voltage da mita don hana lalacewar kayan aiki da kuma tabbatar da kyakkyawan aiki.

Wurin Wuta da Fil ɗin Bayanai
Ana gudanar da sadarwa tsakanin adaftar cibiyar sadarwa ta G-jerin da tsarin fadada, da kuma tsarin / filin samar da wutar lantarki na motocin bas, ta hanyar bas na ciki. Ya ƙunshi Filayen Wutar Wuta 2 da Fin Data 6.

GARGADI
Kar a taɓa bayanan da filayen ikon filin! Taɓawa na iya haifar da lalacewa da lalacewa ta hanyar hayaniyar ESD.

Fil babu.	Suna	Bayani
P1	Tsarin VCC	Samar da tsarin voltage (5VDC)
P2	Tsarin GND	Tsarin ƙasa
P3	Fitowar alama	Token fitarwa tashar jiragen ruwa na processor module
P4	Serial fitarwa	Mai watsa fitarwa tashar jiragen ruwa na processor module
P5	Shigar da serial	Tashar shigar da mai karɓar na'ura mai sarrafawa
P6	Ajiye	An tanada don alamar wucewa
P7	Filin GND	Filin filin
P8	Filin VCC	Samar da filin voltage (24VDC)

Beijer Electronics, Doc ID: 137670

Takardu / Albarkatu

Beijer GT-1428 Digital Input Output Module [pdf] Manual mai amfani GT-1428, GT-1428 Digital Input Output Module, GT-1428, Digital Input Output Module, Input Output Module, Output Module, Module

Magana

• Manual mai amfani