KAYAN AEMC L430 Mai Sauƙin Logger DC Module
Bayanin samfur
Samfuran Module Mai Sauƙin Logger DC, ana samun su a cikin Bmodel uku: L320, L410, da L430. Na'urar tattara bayanai ce da ake amfani da ita don yin rikodi da lura da siginar DC. Littafin mai amfani yana ba da cikakkun bayanai game da fasalulluka na samfur, ƙayyadaddun bayanai, kiyayewa, da ƙarin umarni don shigo da kaya files a cikin maƙunsar rubutu da rikodin tsawaita lokaci.
Siffofin Samfur
- Manuniya da Buttons
- Abubuwan shigarwa da fitarwa
- Yin hawa
Ƙayyadaddun bayanai
- Ƙimar Lantarki
- Ƙayyadaddun Makanikai
- Ƙayyadaddun Muhalli
- Ƙayyadaddun Tsaro
Kulawa
- Shigar da baturi
- Tsaftacewa
Karin bayani A - Ana shigo da .TXT Files a cikin Fayil
Wannan sashe yana ba da umarni kan yadda ake shigo da .TXT files wanda Mai Sauƙin Logger ya ƙirƙira a cikin aikace-aikacen falle kamar Excel. Ya haɗa da bayani kan buɗewa file a cikin Excel da tsara kwanan wata da lokaci.
Karin Bayani B -Rikodin Tsawaita Lokaci (TXRTM)
Wannan sashe yana bayyana tsarin yin rikodin tsawaita lokaci ta amfani da Sauƙaƙe Logger. Yana ba da umarni kan yadda ake yin wannan aikin.
Muhimmiyar Sanarwa Kafin Aiki
Kafin ajiye wani zazzagewar Logger DC file, yana da mahimmanci don saita ma'auni don logger yayi aiki daidai. Littafin yana ba da hanyoyi guda biyu don ƙirƙirar ma'auni: tare da haɗin ma'auni kuma ba tare da haɗin mai shiga ba. An adana ma'auni da aka riga aka ƙayyade a cikin kundin jagora don software mai sauƙi Logger.
Umarnin Amfani da samfur
Don saita ma'auni tare da haɗin Logger:
- Je zuwa File menu kuma zaɓi Scaling.
- Zaɓi kewayon da ya dace don samfurin da aka yi amfani da shi.
- A cikin taga sikelin, ƙirƙiri ma'auni na al'ada idan an buƙata.
- Ajiye ma'auni ta amfani da File-Ajiye Umurni.
Don saita ma'auni ba tare da haɗa Logger ba:
- Je zuwa File menu kuma zaɓi Scaling.
- Zaɓi kewayon da ya dace don samfurin da aka yi amfani da shi.
- A cikin taga sikelin, ƙirƙiri ma'auni na al'ada idan an buƙata.
- Ajiye ma'auni ta amfani da File-Ajiye Umurni.
Lura: Ana iya saita ma'auni kafin ko bayan saukewa, amma yakamata a saita shi kafin adanawa.
MUHIMMAN SANARWA KAFIN AIKI
Dole ne a saita ma'auni kafin a adana DC Logger da aka zazzage file don logger yayi aiki daidai
Don ƙirƙirar ma'auni tare da haɗin Logger:
A karon farko da aka yi amfani da logger na DC tare da sabon shigar da Sauƙaƙen software na Logger dole ne a saita ma'auni don kowane nau'in logger na DC daban-daban. Da zarar an saita ma'auni don takamaiman samfuri, software ɗin za ta tsohuwa zuwa wannan sikelin duk lokacin da aka haɗa samfurin. Don saita ma'auni don samfurin da ake amfani da shi, haɗa logger kuma menu na Sikeli zai bayyana. Danna kan Sikeli kuma taga sikelin don ƙirar da aka yi amfani da ita zai bayyana. Daga taga sikelin zaku iya saita ma'auni na al'ada ko buɗe sikelin da aka riga aka ƙayyade daga File-Buɗe menu. Ma'auni wanda aka riga aka ƙayyade yana cikin kundin jagora na software mai sauƙi Logger.
Don ƙirƙirar ma'auni ba tare da haɗa Logger ba:
Je zuwa Scaling daga File menu kuma zaɓi kewayon samfurin da aka yi amfani da shi. Daga taga sikelin zaku iya ƙirƙirar ma'auni na al'ada kuma adana shi ta amfani da File-Ajiye Umurni. An adana ma'auni da aka riga aka ƙayyade a cikin kundin jagora don software mai sauƙi Logger. Ana iya saita ma'auni kafin ko bayan zazzagewa, amma kafin adanawa.
GABATARWA
GARGADI
Ana ba da waɗannan gargaɗin aminci don tabbatar da amincin ma'aikata da ingantaccen aiki na kayan aiki.
- Karanta littafin koyarwa gaba ɗaya kuma bi duk bayanan aminci kafin aiki da wannan kayan aikin.
- Yi hankali akan kowace da'ira: Mai yuwuwar babban voltages da igiyoyin ruwa na iya kasancewa kuma suna iya haifar da haɗari.
- Karanta ɓangaren ƙayyadaddun bayanai kafin amfani da mai shigar da bayanai.
Kar a taɓa wuce matsakaicin juzu'itage ratings bayar. - Tsaro alhaki ne na mai aiki.
- Don kulawa, yi amfani da sassa na musanyawa na asali kawai.
- KADA KA buɗe bayan kayan aiki yayin da aka haɗa zuwa Duk wani kewaye ko shigarwa.
- KADA KA haɗa jagororin zuwa mai shiga kafin shigar da jagora zuwa juzu'in gwajitage
- KOYAUSHE bincika kayan aiki da jagora kafin amfani.
Sauya kowane sassa mara lahani nan da nan. - KADA KA YI amfani da Sauƙaƙe Logger® Model L320, L410, L430 akan na'urorin lantarki masu ƙima sama da 600V Cat. III.
Alamomin Wutar Lantarki na Duniya
Wannan alamar tana nuna cewa kayan aikin yana da kariya ta hanyar rufi biyu ko ƙarfafawa. Yi amfani da ƙayyadaddun ɓangarorin maye kawai lokacin yin hidimar kayan aiki.
Wannan alamar da ke kan kayan aikin tana nuna GARGAɗi kuma dole ne mai aiki ya koma littafin jagorar mai amfani don umarni kafin aiki da kayan aikin. A cikin wannan jagorar, alamar da ta gabata umarnin tana nuna cewa idan ba a bi umarnin ba, rauni na jiki, shigarwa/sample da lalacewar samfur na iya haifar da. Hadarin girgiza wutar lantarki. Voltage a sassan da aka yiwa alama da wannan alamar na iya zama haɗari.
https://manual-hub.com/
Sauƙaƙe Model Logger® L320/L410/L430 5
Ma'anar Ma'auni Categories
- Cat. I: Don ma'aunai akan ma'aunin da ba a haɗa kai tsaye zuwa madaidaicin bangon AC kamar kariyar sakandire, matakin sigina, da iyakantaccen makamashi.
- Cat. II: Don ma'auni da aka yi akan ma'aunin da aka haɗa kai tsaye zuwa tsarin rarraba wutar lantarki. Examples shine ma'auni akan kayan aikin gida ko kayan aikin hannu.
- Cat. III: Don ma'auni da aka yi a cikin shigarwar ginin a matakin rarraba kamar kayan aiki mai wuyar gaske a cikin ƙayyadaddun shigarwa da na'urorin kewayawa.
- Cat. IV: Don ma'auni da aka yi a samar da wutar lantarki na farko (<1000V) kamar na'urorin kariya na farko, na'urorin sarrafa ripple, ko mita.
Karbar Kayan Ka
Bayan karɓar jigilar kaya, tabbatar da cewa abubuwan da ke ciki sun yi daidai da lissafin tattarawa. Sanar da mai rarraba ku duk wani abu da ya ɓace. Idan kayan aikin ya bayyana sun lalace, file da'awar nan da nan tare da mai ɗauka kuma sanar da mai rarraba ku a lokaci ɗaya, ba da cikakken bayanin kowane lalacewa.
Ajiye kwandon da aka lalace don tabbatar da da'awar ku.
Bayanin oda
- Sauƙaƙe Model Logger® L320 - DC Na Yanzu (Mashigar 4 zuwa 20mA)……………………………………………………………………….. Cat. #2113.97
- Sauƙaƙe Logger® Model L410 - Voltage (Input 0 zuwa 100mVDC)………………………………………………………………….. Cat. #2114.05
- Sauƙaƙe Logger® Model L430 - Voltage (Input 0 zuwa 10VDC)……………………………………………………………………………… Cat. #2114.07
Duk DC Simple Loggers® ana kawo su tare da software (CD-ROM), 6 ft DB-9 RS-232 serial cable, 9V Alkaline baturi da littafin mai amfani.
- Na'urorin haɗi da Sassan Sauyawa
Biyu 5 Voltage Jagora tare da shirye-shiryen bidiyo………………………………………………. Cat. #2118.51
Oda na'urorin haɗi da Sauyawa Sassan Kai tsaye Kan layi
Duba kantin mu a www.aemc.com don samuwa
SIFFOFIN KIRKI
Samfuran L410 da L430:
- Maballin Fara/Dakata
- Shigar da Safety Plugs
- Mai nuna jajayen LED
- Saukewa: RS-232
Misalin L320:
- Maballin Fara/Dakata
- Tashar Tashar Shigarwa
- Red LED Ind
- Saukewa: RS-232
Manuniya da Buttons
Sauƙaƙe Logger® yana da maɓalli ɗaya da alama ɗaya. Dukansu suna kan gaban panel. Ana amfani da maɓallin PRESS don farawa da dakatar da rikodi da kunna logger da kashewa.
Red LED yana nuna matsayi na logger:
- Kiftawa Guda ɗaya: Yanayin TSAYA
- Kiftawa Biyu: Yanayin RECORD
- Ci gaba da Kunnawa: Yanayin KYAUTA
- Babu Kiftawa: Yanayin KASHE
Abubuwan shigarwa da fitarwa
Gefen hagu na Sauƙaƙe Logger® ya haɗa jacks ɗin ayaba aminci na 4mm don Model L410 da L430 da mai haɗa dunƙule don Model L320.
Gefen dama na logger yana da madaidaicin haɗin harsashi mai lamba 9 "D" da ake amfani da shi don watsa bayanai daga logger zuwa kwamfutarka.
Yin hawa
The Simple Logger® sanye take da ramukan sharewa a cikin shafukan farantin tushe don hawa. Don ƙarancin hawa na dindindin, ana iya haɗa madaidaicin Velcro® (wanda aka kawo sako-sako) zuwa wurin logger da farfajiyar da za a ɗora mashin ɗin.
BAYANI
Ƙimar Lantarki
- Yawan Tashoshi: 1
- Tsawon Ma'auni: L320: 0 zuwa 25mADC
- L410: 0 zuwa 100mVDC
- L430: 0 zuwa 10VDC
- Haɗin shigarwa: L320: tsiri guda biyu na post dunƙule
L410 da L430: jakunan ayaba masu aminci - Ƙunƙarar shigarwa: L320: 100Ω
L410 da L430: 1MΩ
L320: 8 Bit (ƙudurin min na 12.5µA)
| Matsayin sikelin | Matsakaicin Matsakaici | Ƙaddamarwa |
| 100% | 25.5mA | 0.1mA |
| 50% | 12.75mA | 0.05mA |
| 25% | 6.375mA | 0.025mA |
| 12.5% | 3.1875mA | 0.0125mA |
L410: 8 Bit (ƙudurin min na 50µV)
| Matsayin sikelin | Matsakaicin Matsakaici | Ƙaddamarwa |
| 100% | 102mV ku | 0.4mV ku |
| 50% | 51mV ku | 0.2mV ku |
| 25% | 25.5mV ku | 0.1mV ku |
| 12.5% | 12.75mV ku | 0.05mV ku |
L430: 8 Bit (ƙarfin min 5mV)
| Matsayin sikelin | Matsakaicin Matsakaici | Ƙaddamarwa |
| 100% | 10.2V | 40mV ku |
| 50% | 5.1V | 20mV ku |
| 25% | 2.55V | 10mV ku |
| 12.5% | 1.275V | 5mV ku |
Sharadi na magana: 23°C ± 3K, 20 zuwa 70% RH, Frequency 50/60Hz, Babu AC waje Magnetic filin, DC Magnetic filin ≤ 40A/m, baturi voltage 9V ± 10%
Daidaito: 1% ± 2cts
- Sample Rate: 4096 / hr max; yana raguwa da 50% duk lokacin da ƙwaƙwalwar ajiya ta cika
- Adana Bayanai: 8192 karatu
- Dabarun Adana Bayanai: TXR™ Rikodin Tsawaita Lokaci™
- Ikon: 9V Alkaline NEDA 1604, 6LF22, 6LR61
- Rikodin Rayuwar Baturi: Har zuwa rikodin shekara 1 @ 77°F (25°C)
- Fitarwa: RS-232 ta hanyar haɗin DB9 (1200 Baud)
Ƙayyadaddun Makanikai
- Girman: 2-7/8 x 2-5/16 x 1-5/8" (73 x 59 x 41mm)
- Nauyi (tare da baturi): 5 oz (140g)
- Hawa: Tushen hawa ramuka ko Velcro® pads
- Kayan Abu: Polystyrene UL V0
Ƙayyadaddun Muhalli
- Yanayin Aiki: -4 zuwa 158°F (-20 zuwa 70°C)
- Ajiya Zazzabi: -4 zuwa 176°F (-20 zuwa 80°C)
- Danshi mai Dangi: 5 zuwa 95% mara tauri
Ƙayyadaddun Tsaro
Aikin Voltage: EN 61010, 30V Cat. III
* Duk ƙayyadaddun bayanai suna iya canzawa ba tare da sanarwa ba
AIKI
Shigar da Software
Mafi qarancin Bukatun Kwamfuta
- Windows® 98/2000/ME/NT da XP
- Mai sarrafawa - 486 ko mafi girma
- 8MB na RAM
- 8MB na sararin diski don aikace-aikacen, 400K ga kowane da aka adana file
- Ɗayan tashar jiragen ruwa na 9-pin; tashar tashar jiragen ruwa ɗaya ɗaya don tallafin firinta
- CD-ROM drive
- Saka Simple Logger® CD a cikin CD-ROM ɗin ku.
Idan an kunna ta atomatik, shirin Saita zai fara ta atomatik. Idan ba a kunna auto-run ba, zaɓi Run daga menu na Fara sannan ka rubuta D:\SETUP (idan drive ɗin CD-ROM ɗinka ce D. Idan ba haka ba, canza harafin da ya dace). - Tagan Saita zai bayyana.
Akwai zaɓuɓɓuka da yawa don zaɓar daga. Wasu zaɓuɓɓuka(*) suna buƙatar haɗin intanet.- Sauƙaƙe Logger, Sigar 6.xx – Yana shigar da Sauƙaƙe Logger® software zuwa kwamfutar.
- *Acrobat Reader – Hanyoyin haɗi zuwa Adobe® web shafin don saukar da sabon sigar Adobe® Acrobat Reader. Ana buƙatar Acrobat Reader don viewTakardun PDF da aka kawo akan CD-ROM.
- * Bincika don Samun Sabuntawar Software - Buɗe sabunta software na AEMC web site, inda akwai sabuntar sigar software don saukewa, idan ya cancanta.
- View Jagorar mai amfani da Littattafai – Buɗe Windows® Explorer don viewtakardun shaida files.
- Don shigar da software, zaɓi Saitin Software na Logger mai sauƙi a saman sashin Saita Saita, sannan zaɓi Sauƙaƙe Logger, Sigar 6.xx a cikin sashin Zabuka.
- Danna maɓallin Shigarwa kuma bi abubuwan da ke kan allo don shigar da software.
Bayanan Rikodi
- Haɗa logger zuwa da'ira don gwadawa.
NOTE: Tabbatar kiyaye polarity ko ba za ku sami karatu ba. - Latsa maɓallin PRESS a saman mai shigar da karar don fara zaman rikodi. Alamar LED za ta yi kifta sau biyu don nuna cewa an fara rikodi.
- Lokacin da ake so zaman rikodi ya ƙare, danna maɓallin PRESS don ƙare rikodin. Alamar LED za ta yi kiftawa guda ɗaya don nuna lokacin rikodi ya ƙare kuma mai shiga yana cikin Tsayawa.
- Cire logger daga da'irar da ake gwadawa kuma a kai shi zuwa kwamfutar don zazzage bayanai. Duba Jagorar mai amfani akan CD-ROM don saukar da umarnin.
Amfani da Software
Kaddamar da software kuma haɗa kebul na RS-232 daga lissafin ku zuwa logger.
NOTE: Za a buƙaci a zaɓi harshe a farkon ƙaddamarwa.
Zaɓi Port daga mashaya menu kuma zaɓi tashar Com (COM 1, 2 3 ko 4) da za ku yi amfani da ita (duba littafin littafin ku). Da zarar software ta gano ƙimar baud ta atomatik, mai shigar da bayanai zai yi sadarwa tare da kwamfutar. (Lambar ID na mai shiga da adadin maki da aka nuna). Zaɓi Zazzagewa don nuna jadawali. (Yana ɗaukar kusan daƙiƙa 90.) Zaɓi File daga mashaya menu, sannan Scaling da Range of your logger.
Shirye-shiryen Ma'auni da Injiniya
Samfuran Logger® Sauƙaƙan L320, L410, da L430 suna ba mai aiki damar tsara ƙima don sikeli da sassan injiniya daga cikin software.
Wannan yana ba mai amfani damar nuna bayanan da aka yi rikodi akan jadawali ko a cikin jeri na tebur kai tsaye, a cikin raka'o'in da suka dace da ma'auni, maimakon mathematically canza vol.tage ko halin yanzu zuwa ma'auni da ƙimar da ta dace bayan an nuna jadawali.
Ana iya tsara ma'auni daga wurare biyu a cikin software:
- File zaɓin menu: Yi amfani da wannan zaɓi don ƙirƙirar ɗakin karatu na ma'auni don amfani da DC voltage da DC na yanzu loggers. Wannan zai ba mai amfani damar zaɓar adadin ma'auni da aka riga aka ƙayyade.
- Zaɓin menu na ma'auni: Yi amfani da wannan zaɓin don ƙirƙirar ma'auni don masu guntuwar da aka haɗa zuwa tashar tashar jiragen ruwa don saukewa.
Sauƙaƙe Logger® software yana bawa mai aiki damar ayyana har zuwa maki 17 tare da sikelin don aunawar DC na yanzu kuma har zuwa maki 11 don DC vol.tage ma'aunin nau'in katako.
Ana iya amfani da duk wani haɗin maki don ƙirƙirar ma'auni, wanda ke ba mai amfani damar yin ƙirƙira duka bayanan layi da marasa layi. (Dubi Figures 2 da 3).
Ƙirƙirar ɗakin karatu na Sikeli
- Zaɓi File sannan Scaling daga babban menu.
- Zaɓi nau'in logger da za a auna shi daga zaɓin da aka gabatar.
- Taga mai kama da Hoto 4 zai bayyana da zarar kun zaɓi zaɓinku. Wannan taga yana nuna maki sikelin shirye-shirye da filin raka'a masu shirye-shirye. Allon hagu yana ba da ma'auni da shirye-shiryen naúrar, yayin da gefen dama yana nuna profile na ma'auni da aka tsara dangane da ainihin shigarwar zuwa logger.
Ƙimar sikelin da aka shigar a nan ba za ta yi tasiri ga jadawali na yanzu ba, idan mutum ya kasance akan allon. Wannan tagar tana da tsayin daka don ƙirƙirar samfuran da za a yi amfani da su a wani kwanan wata tare da sabbin masu saƙon da aka zazzage.
Ƙirƙirar da adana ma'auni da raka'a a nan zai cece ku lokaci daga baya, musamman don saitunan sikelin da ake yawan amfani da su.
Akwai maɓallai biyu daga cikin wannan taga:
- Share duk maɓalli: Wannan zai share duk sikelin lambobin da aka shigar da kowane raka'a da aka shigar yana ba ku damar sake farawa.
- Maɓallin Rufe: Yana komawa zuwa babban menu ba tare da adana bayanai ba.
Yi matakai masu zuwa don ƙirƙirar Samfura:
- Danna kowane ramummuka mara kyau kuma buga lamba (har zuwa haruffa 5) don shigar da ƙimar sikeli. Alamar cirewa da maki goma za a iya amfani da su azaman ingantattun haruffa (misali -10.0 zai zama ingantacciyar lambar harafi 5).
Yayin da kake shigar da bayanan lamba a cikin ma'auni, ma'auni profile zai bayyana akan ƙaramin jadawali a gefen dama na taga. Dukansu masu layi da marasa layi profiles suna yarda. - Da zarar an ayyana ma'auni, danna cikin akwatin Raka'a don tsara raka'o'in injiniyan da za a nuna akan jadawali. Har zuwa haruffa haruffa 5 ana iya buga su a cikin wannan akwatin (misali PSIG ko GPM, da sauransu).
- Bayan an shigar da duk bayanan kuma kun gamsu da samfurin, danna kan File a saman gefen hagu na taga akwatin maganganu.
- Zaɓi ɗaya daga cikin zaɓuɓɓukan da ake da su:
- Buɗe: Yana dawo da samfuri da aka adana a baya.
- Ajiye: Ajiye samfuri na yanzu da kuka ƙirƙira don amfani na gaba.
- Buga: Yana buga kwafin ma'auni da taga shirye-shiryen naúrar kamar yadda aka gani akan allon.
Ƙirƙirar Ma'auni don Masu Logger ɗin Haɗe
- Haɗa Simple Logger® zuwa tashar tashar kwamfuta don saukewa. Duba babban jagorar don saukewa umarnin.
- Da zarar an zaɓi tashar da ta dace, bayanai za su bayyana a cikin akwatin ɗaukaka a gefen dama na allon. Wannan wata alama ce da ke nuna cewa software ɗin ta haɗa haɗin yanar gizo. Umurnin Sikeli kuma zai bayyana akan ma'aunin ɗawainiya idan an gano mai shigar da shiga yana ba da damar tsara ma'auni da injiniyoyi.
- allo mai kama da Hoto 5 zai bayyana. Gefen hagu na allon yana ba da ma'auni da shirye-shiryen naúrar, yayin da gefen dama yana nuna profile na ma'auni da aka tsara dangane da ainihin shigarwar zuwa logger.
- Mai aiki na iya saita ma'auni ta hanyar shirye-shirye kaɗan kamar maki biyu, ƙananan ƙarshen da babban ƙarshen, ko ta shigar da maki da yawa kamar yadda ya cancanta don ayyana ma'auni har zuwa maki 17 don logger 4-20 mA kuma har zuwa maki 11. don DC voltage masu gardama. Makiyoyin da aka shigar ba dole ba ne su kasance masu layi ɗaya amma ya kamata su zama ainihin wakilcin alakar siginar DC zuwa maki sikelin.
- Don shigar da ƙimar sikeli a cikin kowane ramin, danna kan ramin kuma buga lamba har zuwa haruffa 5. Ana iya amfani da alamar ragi da maki goma a matsayin ingantattun haruffa (misali -25.4 zai zama ingantacciyar lamba mai lamba 5).
- Da zarar an bayyana ma'auni, danna cikin akwatin naúrar don tsara raka'o'in injiniyan da za a nuna akan jadawali. Har zuwa haruffa haruffa 5 ana iya buga su a cikin wannan akwatin.
- Da zarar kun shigar da ma'auni daidai da bayanan naúrar, danna Ok don ci gaba. Allon da ke cikin Hoto 6 zai bayyana yana ba ku damar adana bayanan da aka shigar don amfani a gaba. Danna Ee don adana bayanan ko A'a don ƙetare adana bayanan kuma amfani da lokaci ɗaya kawai.
- Idan ka danna Ee, akwatin maganganu zai buɗe kama da Hoto 7 inda zaku iya rubuta sunan (har haruffa 8) waɗanda kuke son amfani da su don file.
- Danna Ok don ajiyewa file da kuma tsara jadawali tare da sabon sikelin da bayanan naúrar ko danna kan Cancel don jefar da shi kuma komawa kan sikelin da naúrar shirye-shiryen allo.
KIYAWA
Shigar da baturi
A ƙarƙashin yanayi na al'ada, baturin zai šauki har zuwa shekara guda na ci gaba da rikodi sai dai idan an sake kunna logger akai-akai.
A cikin yanayin KASHE, mai shigar da karar yana sanya kusan babu kaya akan baturi. Yi amfani da yanayin KASHE lokacin da ba a amfani da logger. Sauya baturin sau ɗaya a shekara a cikin amfani na yau da kullun.
Idan za a yi amfani da logger a yanayin zafi ƙasa da 32°F (0°C) ko kuma akai-akai ana kunnawa da kashewa, maye gurbin baturin kowane watanni shida zuwa tara.
- Tabbatar cewa an kashe logger ɗin ku (babu wani haske mai ƙyalli) kuma duk abubuwan da aka haɗa an katse.
- Juya logger kifaye. Cire kusoshi huɗu na Phillips daga farantin tushe, sannan cire farantin tushe.
- Nemo mai haɗin baturi mai waya biyu (ja/baƙi) kuma haɗa baturin 9V zuwa gare shi. Tabbatar cewa kun lura da polarity ta hanyar jera ginshiƙan baturin zuwa madaidaitan tashoshi akan mahaɗin.
- Da zarar mai haɗawa ya toshe kan baturin, saka baturin a cikin shirin riƙon da ke kan allon kewayawa.
- Idan naúrar ba ta cikin yanayin rikodin bayan shigar da sabon baturi, cire haɗin kuma danna maɓallin sau biyu sannan sake shigar da baturin.
- Sake haɗa farantin tushe ta amfani da sukurori huɗu da aka cire a Mataki na 2. Mai shigar da ku yanzu yana yin rikodi (LED kiftawa). Danna maɓallin LATSA na daƙiƙa biyar don tsayar da kayan aikin.
NOTE: Don ajiya na dogon lokaci, cire baturin don hana tasirin fitarwa.
Tsaftacewa
Ya kamata a tsaftace jikin katako tare da zane da aka jika da ruwan sabulu. Kurkura tare da zane da aka jika da ruwa mai tsabta. Kada a yi amfani da sauran ƙarfi.
RATAYE A
Ana shigo da .TXT Files a cikin Fayil
Buɗe Sauƙaƙe Logger .TXT file a cikin Excel
Mai zuwa exampYi amfani da Excel Ver. 7.0 ko mafi girma.
- Bayan buɗe shirin Excel, zaɓi "File" daga babban menu sannan zaɓi "Buɗe".
- A cikin akwatin maganganu da ya bayyana, bincika kuma buɗe babban fayil inda mai shigar da ku .TXT files ana adanawa. Wannan zai kasance a cikin C:\Program Files\Simple Logger 6.xx idan kun karɓi zaɓin tsoho wanda shirin shigar logger ya bayar.
- Na gaba, canza file rubuta zuwa "Text Files” a cikin filin da aka lakafta Files na Type. Duk .TXT files a cikin kundin logger ya kamata a gani yanzu.
- Danna sau biyu akan abin da ake so file don buɗe mayen shigo da rubutu.
- Review Zaɓuɓɓukan da ke cikin allon wizard na farko kuma a tabbata cewa an zaɓi waɗannan zaɓuɓɓuka masu zuwa:
- Nau'in Bayanan Asali: Iyakance
- Fara Shigowa a Layi: 1
- File Asalin: Windows (ANSI)
- Danna maɓallin "NEXT" a ƙasan akwatin maganganu na Wizard.
Allon maye na biyu zai bayyana. - Danna "Comma" a cikin akwatin Delimiters. Ya kamata alamar rajistan shiga ta bayyana.
- Danna maɓallin "NEXT" a ƙasan akwatin maganganu na Wizard.
Allon mayen na uku zai bayyana. - A view na ainihin bayanan da za a shigo da su ya kamata su bayyana a cikin ƙananan ɓangaren taga. ginshiƙi na 1 yakamata a haskaka. A cikin Rukunin Data Format taga, zaɓi "Kwanan Wata".
- Na gaba, danna kan "Gama" don kammala aiwatar da shigo da bayanan.
- Bayanan za su bayyana a cikin maƙunsar bayanan ku a cikin ginshiƙai biyu (A da B) kuma za su yi kama da wanda aka nuna a Tebu A-1.
| A | B |
| 8 | Makamai |
| 35401.49 | 3.5 |
| 35401.49 | 5 |
| 35401.49 | 9 |
| 35401.49 | 13.5 |
| 35401.49 | 17 |
| 35401.49 | 20 |
| 35401.49 | 23.5 |
| 35401.49 | 27.5 |
| 35401.49 | 31 |
| 35401.49 | 34.5 |
| 35401.49 | 38 |
Table A-1-SampAna Shigo da Bayanai zuwa cikin Excel.
Tsara Kwanan Wata da Lokaci
Rukunin 'A' ya ƙunshi lamba goma da ke wakiltar kwanan wata da lokaci.
Excel na iya canza wannan lamba kai tsaye kamar haka:
- Danna shafi na 'B' a saman ginshiƙi don zaɓar bayanan, sannan danna kan "Insert" daga babban menu kuma zaɓi "Shafi" daga menu mai saukewa.
- Bayan haka, danna kan shafi 'A' a saman ginshiƙi don zaɓar bayanan, sannan danna kan "Edit" daga babban menu kuma zaɓi "Copy" don kwafi gaba ɗaya shafi.
- Danna cell 1 na shafi 'B' sannan ka danna "Edit" kuma zaɓi "Manna" don saka kwafin shafi 'A' cikin shafi 'B'. Wannan yana da mahimmanci idan kuna son nuna kwanan wata da lokaci a cikin ginshiƙai daban-daban guda biyu.
- Na gaba, danna saman shafi na 'A', sannan danna kan "Format" kuma zaɓi "Cells" daga menu mai saukewa.
- A cikin akwatin maganganu da ke buɗewa, zaɓi zaɓin “Kwanan Wata” daga jerin rukuni a hagu. Zaɓi tsarin kwanan wata da kuke so kuma danna kan "Ok" don tsara shafi.
- Danna saman shafin 'B', sannan danna kan "Format" kuma zaɓi "Cells" daga menu mai saukewa.
- A cikin akwatin maganganu da ke buɗewa, zaɓi zaɓin "Lokaci" daga jerin nau'ikan da ke hagu. Zaɓi tsarin lokaci da kuke so kuma danna kan "Ok" don tsara shafi.
Teburin A-2 yana nuna maƙunsar rubutu na yau da kullun tare da nunin kwanan wata, lokaci da ƙima.
Yana iya zama dole a canza faɗin shafi don ganin duk bayanan.
| A | B | C |
| 12/02/04 | 11:45 na safe | 17 |
| 12/02/04 | 11:45 na safe | 20 |
| 12/02/04 | 11:45 na safe | 23.5 |
| 12/02/04 | 11:45 na safe | 27.5 |
| 12/02/04 | 11:45 na safe | 31 |
| 12/02/04 | 11:45 na safe | 34.5 |
| 12/02/04 | 11:45 na safe | 38 |
| 12/02/04 | 11:45 na safe | 41.5 |
| 12/02/04 | 11:45 na safe | 45.5 |
| 12/02/04 | 11:46 na safe | 49 |
| 12/02/04 | 11:46 na safe | 52 |
Tebur A-2 - Nuna Kwanan Wata, Lokaci da Ƙimar
RATAYE B
Rikodin Tsawaita Lokaci (TXR™)
Rikodin tsawaita lokaci tsari ne na atomatik wanda ke sabunta sample rate da adadin adana bayanai dangane da tsawon rikodi. Matsakaicin adadin wuraren adana bayanai shine 8192. Lokacin da mai shigar da bayanan ya fara sabon zaman rikodi, yana yin haka a mafi sauri s.ampLe ƙimar maki 4096 a kowace awa (0.88 seconds kowace aya). Sauƙaƙan Loggers® na iya yin rikodi a wannan ƙimar na sa'o'i biyu. Idan zaman rikodi ya ci gaba da wuce sa'o'i biyu, dabarar rikodi na tsawaita lokaci ta zama aiki.
Farawa da sampHar ila yau, bayan kammala sa'o'i biyu na yin rikodi, mai shiga ya ci gaba da yin rikodi ta hanyar zaɓen sake rubuta bayanan da aka adana a baya. Sauƙaƙan Logger® shima ya rage rabin saampƘimar zuwa 2048/hr (1.76 seconds a kowace aya) don sababbin ƙimar da aka adana don dacewa da ƙimar da aka yi rikodi a baya.
Ana ci gaba da yin rikodi na sa'o'i biyu masu zuwa a wannan sabon adadin har sai an cika sauran wuraren ajiya 4096.
Tsarin rikodin tsawaita lokaci na zaɓin sake rubuta bayanan da aka adana a baya da kuma rage sampAdadin sabbin bayanan da aka adana yana ci gaba a duk lokacin da ƙwaƙwalwar ajiya ta cika. Tebura B-2 yana nuna alaƙa tsakanin lokacin rikodi da sample rate ga data logger ta amfani da wannan dabara.
Ana ci gaba da yin rikodi ta wannan hanya har sai an daina yin rikodi. Don dacewa a cikin nazarin bayanai, tazarar rikodi yana ɗaukar ƙimar mintuna goma sha biyar, sa'a ɗaya, rabin sa'a, sa'a ɗaya da sauransu.
Kamar sikelin atomatik, rikodi na tsawaita lokaci kusan ba zai iya gani ga mai amfani ba. Don kyakkyawan sakamako, saita logger zuwa yanayin jiran aiki lokacin da aka gama ma'aunin, duka biyu don guje wa haɗa bayanan da ba'a so a cikin makircin, kuma don samar da matsakaicin ƙuduri na tsawon lokacin sha'awa.
| Sample Rate a kowace hr. | Daƙiƙa a cikin Sample | Jimlar Lokacin Yin Rikodi (sa'o'i) | Jimlar Lokacin Rikodi (kwanaki) |
| 4096 | 0.88 | 2 | 0.083 |
| 2048 | 1.76 | 4 | 0.167 |
| 1024 | 3.52 | 8 | 0.333 |
| 512 | 7.04 | 16 | 0.667 |
| 256 | 14.08 | 32 | 1.333 |
| 128 | 28.16 | 64 | 2.667 |
| 64 | 56.32 | 128 | 5.333 |
| 32 | 112.64 | 256 | 10.667 |
| 16 | 225.28 | 512 | 21.333 |
| 8 | 450.56 | 1024 | 42.667 |
| 4 | 901.12 | 2048 | 85.333 |
| 2 | 1802.24 | 4096 | 170.667 |
| 1 | 3604.48 | 8192 | 341.333 |
Gyarawa da daidaitawa
Don tabbatar da cewa kayan aikin ku sun dace da ƙayyadaddun masana'anta, muna ba da shawarar cewa za a dawo da shi zuwa Cibiyar Sabis ɗin masana'anta a cikin tazarar shekara ɗaya don sake daidaitawa, ko kamar yadda wasu ƙa'idodi ko hanyoyin ciki suka buƙata.
Don gyara kayan aiki da daidaitawa:
Dole ne ku tuntuɓi Cibiyar Sabis ɗinmu don Lambar Izinin Sabis na Abokin Ciniki (CSA#). Wannan zai tabbatar da cewa lokacin da kayan aikin ku ya zo, za a bi diddigin su kuma a sarrafa su da sauri. Da fatan za a rubuta CSA# a wajen kwandon jigilar kaya. Idan an dawo da kayan aikin don daidaitawa, muna buƙatar sanin idan kuna son daidaitaccen gyare-gyare, ko abin da za a iya ganowa zuwa NIST (Ya haɗa da takardar shaidar daidaitawa da bayanan daidaitawa rikodi).
Jirgin zuwa: Chauvin Arnoux®, Inc. dba AEMC® Instruments
15 Faraday Drive Dover, NH 03820 Amurka
- Waya: 800-945-2362 (Fitowa ta 360) 603-749-6434 (Fitowa ta 360)
- Fax: 603-742-2346 or 603-749-6309
- Imel: gyara@aemc.com
- (Ko tuntuɓi mai rarraba ku mai izini)
Ana samun farashi don gyarawa, daidaitaccen daidaitawa, da daidaitawa da ake iya ganowa ga NIST.
NOTE: Dole ne ku sami CSA# kafin dawo da kowane kayan aiki.
Taimakon Fasaha da Talla
Idan kuna fuskantar kowace matsala ta fasaha, ko buƙatar kowane taimako tare da ingantaccen aiki ko aikace-aikacen kayan aikin ku, da fatan za a kira, wasiƙa, fax ko imel ɗin ƙungiyar tallafin fasahar mu:
- Chauvin Arnoux®, Inc. dba AEMC® Instruments
- 200 Foxborough Boulevard
- Foxborough, MA 02035 Amurka
- Waya: 800-343-1391
- 508-698-2115
- Fax: 508-698-2118
- Imel: techsupport@aemc.com
- www.aemc.com
- NOTE: Kar a jigilar kayan aiki zuwa Foxborough, adireshin MA.
Garanti mai iyaka
Mai Sauƙin Logger® Model L320/L410/L430 yana da garanti ga mai shi na tsawon shekara guda daga ranar siyan asali na rashin lahani a cikin kera. An bayar da wannan garanti mai iyaka ta AEMC® Instruments, ba ta mai rarrabawa daga wanda aka saya ba. Wannan garantin ya ɓace idan naúrar ta kasance tampda aka yi tare da, cin zarafi ko kuma idan lahanin yana da alaƙa da sabis ɗin da AEMC® Instruments bai yi ba.
Don cikakken garanti da cikakken bayani, da fatan za a karanta Garanti
Bayanin ɗaukar hoto, wanda ke haɗe zuwa Katin Rajistar Garanti (idan an haɗa shi) ko kuma yana nan a www.aemc.com. Da fatan za a adana bayanan Garanti tare da bayananku.
Abin da AEMC® Instruments zai yi:
Idan matsala ta faru a cikin tsawon shekara guda, zaku iya dawo mana da kayan aikin don gyarawa, muddin muna da bayanan rajistar garantin ku file ko hujjar sayayya. AEMC® Instruments zai, a zaɓinsa, gyara ko maye gurbin abin da bai dace ba.
Yi rijista ONLINE AT:www.aemc.com
Garanti Gyaran
Abin da dole ne ku yi don dawo da Kayan aiki don Gyara Garanti:
Da farko, nemi Lambar Izinin Sabis na Abokin Ciniki (CSA#) ta waya ko ta fax daga Sashen Sabis ɗinmu (duba adireshin ƙasa), sannan mayar da kayan aiki tare da Fom ɗin CSA da aka sa hannu. Da fatan za a rubuta CSA# a wajen kwandon jigilar kaya. Koma kayan aiki, postage ko jigilar kaya an riga an biya zuwa:
Jirgin zuwa: Chauvin Arnoux®, Inc. dba AEMC® Instruments
15 Faraday Drive Dover, NH 03820 Amurka
- Waya: 800-945-2362 (Fitowa ta 360) 603-749-6434 (Fitowa ta 360)
- Fax: 603-742-2346 or 603-749-6309
- Imel: gyara@aemc.com
Tsanaki: Don kare kanku daga hasarar hanyar wucewa, muna ba da shawarar ku tabbatar da kayan da aka dawo dasu.
NOTE: Dole ne ku sami CSA# kafin dawo da kowane kayan aiki.
Chauvin Arnoux®, Inc. dba AEMC® Instruments
15 Faraday Drive
Dover, NH 03820 Amurka
Waya: 603-749-6434
Fax: 603-742-2346
www.aemc.com
Takardu / Albarkatu
 |
KAYAN AEMC L430 Mai Sauƙin Logger DC Module [pdf] Manual mai amfani L320, L410, L430, L430 Mai Sauƙaƙe DC Module, Sauƙaƙan Logger DC Module, Logger DC Module, DC Module, Module |