cMT X Series Data Display Machine Control
Guía de usuario

cMT X Series Data Display Machine Control

Weintek HMI + CODESYS SoftPLC
Weintek Integrates CODESYS into HMIs:
All-in-One Control for HMI + PLC + I/O Solutions

Why CODESYS Soft PLC ?

• CODESYS, the world’s most widely used Soft PLC platform, supports all five IEC 61131-3 languages and integrates PLC programming, object-oriented development, visualization, motion control, and safety into one intuitive interface.
• Its open architecture and strong extensibility enable seamless integration with major industrial protocols and easy adaptation to diverse automation devices and controllers. This scalable control solution is key to smart manufacturing.
• CODESYS stands as the global Soft PLC market leader, and Soft PLC solution is set to grow steadily, securing even greater market share in the years ahead.

Aplicacións clave:

• Automatización de fábricas
• Automatización móbil
• Energy Automation
• Production Automation
• Automatización de edificios

Advantages de Weintek + CODESYS Solution

1. Powerful Development Platform for Simplified Integration
   CODESYS provides a universal, open development environment that supports over 500 controller brands and thousands of devices, enabling logic control on a single platform. Combined with Weintek Easy Builder Pro for HMI graphic design, it allows developers to greatly reduce time and cost for integration.
2. Software-Defined Architecture for Enhanced Control Capabilities By fully software-enabling traditional PLC functions, CODESYS turns Weintek HMIs into powerful control centers—no extra PLC hardware needed. With native support for Ether CAT, CANopen, and Modbus TCP, it delivers seamless
   communication, direct servo control, and modular, high-performance motion
3. All-in-One Solution for Automation and IIoT Applications
   Beyond programming, visualization, and communication, CODESYS combined with Weintek’s Encloud enables remote monitoring and cloud connectivity-accelerating smart manufacturing and AIoT deployment.
4. Proven Control Foundation for Global Reliability
   Trusted by hundreds of thousands of developers worldwide and adopted by leading manufacturers, CODESYS combined with Weintek Ir Series Remote 1/0 modules delivers a stable, scalable control architecture for modern automation.

Dual OS Architecture for Versatile Performance
Independent Operating Systems: Linux + RTOS
An HMI with dual functionality of display and PLC control. Thanks to its independent operating system design, even if one side fails, the other can continue running normally.

Internal Communication Architecture
Direct internal pass-through communication between the HMI and PLC via Easy Builder Pro enables the HMI to control end machinery and equipment.

Ir Series
The iR Series offers couplers, digital I/O, and analog I/O modules with the performance and reliability to meet market demands.
Key Features of Remote I/O Modules

Weintek Coupler	Weintek I/O Module
IR-ETN (Modbus TCP/Ether Net/IP) Modbus TCP: The classic protocol for industrial devices and general manufacturing automation. Ether Net/IP: Built on TCP/IP and CIP for strong compatibility, multi-topology support, and seamless IT integration-widely adopted in factory automation.	Módulo dixital Entrada dixital: Sink & Source Digital Output: Sink, Source & Relay
IR-COP (CANopen Slave) Simple structure with excellent real-time performance, ideal for embedded systems and high-reliability equipment such as medical and automotive devices.	Módulo analóxico Ancho Voltage & Current Range: Voltage: -10 a 10 V Current: -20 to 20 mA
IR-ECAT (Ether CAT Slave) Ultra-low latency with tight synchronization, supporting multi-node daisy-chain topologies-perfect for high-speed, precision motion control, robotics, and automated assembly.	Temperatura Thermocouple (TC) and RTD Type Compatibility User-defined Table Support
3rd Party PROFINET Coupler High-speed real-time networking with multi-topology support and large-device capacity, suited for complex, high-speed automation systems.	Control de movemento Single-Axis Motion Control Support

Exclusive Function Blocks

Aplicacións industriais
Smart Farm Irrigation Systems
The Smart Farm Irrigation System is a mobile intelligent irrigation solution built with Weintek cT X Series HMI and CODESYS Softly. Using Modbus TCP/IP, it controls iR Series I/O modules (iR-ETN, DI, DQ, AM). Featuring modular design, high flexibility, and smart control, it is ideal for precision agriculture and environmental monitoring.

Beneficios clave

	Centralized Control with Visual Interface
	Smart and Efficient Irrigation via Closed-Loop Control
	Remote Management with Instant Alerts
	Modular I/O Design for Easy and Flexible Expansion

Solucións
CMT X HMI + CODESYS Soft PLC
The CMT X HMI provides high-performance control with an intuitive graphical interface.
Modbus TCP/IP Integration + IR-ETN Coupler
iR-ETN serves as a Modbus TCP/IP slave to aggregate DI, DQ, and AM module data for the master.
Sensors + Irrigation Loop Control
DI modules read soil moisture valve on/off signal and flow-switch signals; AM modules capture analog data (e.g., humidity %, pressure); DQ modules drive valves and pumps.
Remote Monitoring + Data Logging
The CMT X HMI supports Easy Access 2.0, multi-protocol databases, and MQTT/OPC UA to export field data to the cloud or central SCADA.
Aplicacións industriais
Water-Cooled Pressure Test Stations
An automated leak and pressure testing system was developed for water-cooled components in server, automotive, and high-power equipment production. Integrating Weintek HMI with CODESYS Soft PLC, the solution ensures precise control and monitoring, addressing challenges like parameter variability, scattered data, and human error to enhance testing efficiency and reliability.

Beneficios clave

	Streamlined Test Automation for Higher Efficiency
	Integrated Data Logging with Traceable Reporting
	Flexible Configuration for Seamless Equipment Integration
	Multi-Level Access with Visual Alerts for Error Prevention

Solucións
CMTXHMI+ Bidirectional Communication
The visual interface exchanges test data with the Soft PLC in real time and supports trend display, alarms, and logging.
CODESYS Soft PLC + Ether CAT Control
The controller serves as an Ether CAT master to control iR modules with high-speed, real-time response.
Automated Test Logic + Alarm Handling
The PLC executes staged pressure control and triggers NG alarms when faults are detected.
Sensor Integration + HMI Data Logging
The DI/Al modules collect sensor signals, while the HMI performs threshold checks and records results.
Aplicacións industriais
Cleanroom Fan Filter Unit Monitoring Systems
Designed for pharmaceutical, semiconductor, and precision industries, this cleanroom FFU and monitoring solution leverages Weintek HMI with CODESYS Soft PLC to optimize environmental control. It reduces energy waste, enables centralized monitoring, and supports remote maintenance—boosting efficiency, stability, and smart energy management.

Beneficios clave

	EC Fans with Closed-Loop Control for Energy Saving
	Remote Monitoring with Historical Data Management
	Auto Alerts and Fan Calibration for Cleanroom Stability
	Graphical HMI with Role-Based Access for Easy Maintenance

Solucións
Centric Control + CODESYS Soft PLC
The CMT X HMI enables multi-zone FFU monitoring and control via touchscreen interface.
Closed-Loop Feedback + Modbus Monitoring
The system reads airflow, differential pressure, and RPM for real-time auto calibration.
Integrated Sensing + Data Logging
Temperature, humidity, pressure, and particle data are fed into the HMI for alerts and records.
Adaptive Energy Management + EC Motor Control
Smart control dynamically adjusts fan speed and air exchange rates for optimized efficiency.

IR Series Specifications

Módulo acoplador		iR-ETN	iR-COP	iR-ECAT
Expansión Módulo de E/S	Number of Bus Terminals Digital Input Point Digital Output Point Analog Input Channel Analog Output Channel	Depends on Power Consumption
		Máx. 256
		Máx. 128
		Máx. 64
		Máx. 64
Taxa de transferencia de datos		10/100 Mbps	50k~1 Mbps	100 Mbps
Max. Number of TCP/IP Connections		8 Conexións	–	–
Protocolo		Modbus TCP/IP Server, Ether Net/IP adapter	CANopen Slave	Ether CAT Slave
Illamento		Network to Logic Isolation : Yes	CAN bus Isolation : Yes	Network to Logic Isolation : Yes
Poder	Fonte de alimentación Power Consumption Current for Internal Bus Current Consumption Power Isolation Back-up Fuse	24 V CC (-15 %/+20 %)
		Nominal 100mA@24VDC
		Max 2A@5VDC
		220 mA @ 5 VDC	170 mA @ 5 VDC	270 mA @ 5 VDC
		Si
		£ 1.6A Self-recovery
Especificación	PCB Coating Enclosure Dimensions WxHxD Peso Monte	Si
		Plástico
		27 x 109 x 81 mm
		Aprox. 0.15 kg
		Montaxe en carril DIN de 35 mm
Medio ambiente	Estrutura de protección Temperatura de almacenamento Operating Temperature Relative Humidity Altitude Resistencia ás vibracións	IP20
		-20° ~ 70° C (-4° ~ 158° F)
		0 ° ~ 55 ° C (32 ° ~ 131 ° F)
		10% ~ 90% (sen condensación)
		3,000 m
		10 a 25 Hz (dirección X, Y, Z 2G 30 minutos)
Certificación	CE	Marcado CE
	UL	cULus Listado

Módulo acoplador		iR-ETN40R	iR-ETN40P
Expansion I/O Module	No. of Bus Terminals Digital Input Point Digital Output Point Analog Input Channel Analog Output Channel Data Transfer Rate Max. Number of TCP/IP Connections Protocol Network to Logic Isolation No. of Ports Total Number of Outputs Output Type Output Voltage Output Current Response Time Isolation Total Number of Outputs Output Type Output Voltage Output Current Max. Output Frequency Isolation Total Number of Inputs Isolation Total Number of Inputs Input Type Logic 1 Input Voltage Logic 0 Input Voltage Response Time Total Number of Inputs Input Type Logic 1 Input Voltage Logic 0 Input Voltage Max. Input Frequency	Depends on Power Consumption
		Máx. 224
		Máx. 112
		Máx. 64
		Máx. 64
Interface de comunicación		10/100 Mbps
Especificacións
		8 conexións
		Modbus TCP Server, EtherNet/IP adapter
		Si
		1
Saída dixital		16
		Relevo	Fonte
		250 VCA/30 VCC	11~28VDC
		2A per channel (Max 8A)	0.5A per channel (Max 4A)
		10 ms	OFF->ON: 100 μs, ON->OFF: 600 μs
		Yes, electromagnetic isolation	Yes, optocoupler isolation
High-speed Output		0	2
		N/A	Fonte
		N/A	5VDC
		N/A	50 mA por canal
		N/A	40 kHz
		N/A	Yes, optocoupler isolation
Entrada dixital		24
		Yes, optical isolation
Entrada xeral		20
		Pía ou Fonte
		15~28 VDC
		0~5 VDC
		OFF->ON: 5 ms, ON->OFF: 1 ms
High-speed Input		4
		SINK INPUT (PNP)
		15~28VDC
		0~5VDC
		20 kHz
Poder	Fonte de alimentación	24 V CC (-15 %/+20 %)
	Consumo de enerxía	Nominal 255mA@24VDC, Max. 540mA@24VDC	Nominal 100mA@24VDC, Max. 530mA@24VDC
	Current for-Internal Bus	Máx. 2A@5VDC
	Consumo actual	520 mA @ 5 VDC	350mA ＠ 5VDC
	Illamento Eléctrico	Logic to Field Power Isolation: Yes
	Back‐up Fuse	£ 1.6A Self-recovery
Especificación	Revestimento de PCB	Si
	Recinto	Plástico
	Dimensións WxHxD	64 x 109 x 81 mm
	Peso	Aprox. 0.27 kg
	Monte	Montaxe en carril DIN de 35 mm
Medio ambiente	Estrutura de protección	IP20
	Temperatura de almacenamento	-20° ~ 70° C (-4° ~ 158° F)
	Temperatura de funcionamento	-10° ~ 60° C (14° ~ 140° F)
	Humidade relativa	10% ~ 90% (sen condensación)
	Altitude	3,000 m
	Resistencia ás vibracións	10 a 25 Hz (dirección X, Y, Z 2G 30 minutos)
Certificación	CE	Marcado CE
	UL	cULus Listado
	EtherNet/IP	ODVA Conformance Test

Digital I/O Module		iR-DI16-K	iR-DM16-P	iR-DM16-N	iR-DQ16-P	iR-DQ16-N	iR-DQ08-R
Lóxica de entrada		Pía ou Fonte	Pía ou Fonte	Pía ou Fonte	N/A	N/A	N/A
Número de Entradas		16	8	8	0	0	0
Lóxica de saída		N/A	Fonte	Pía	Fonte	Pía	Relevo
Número de Saídas		0	8	8	16	16	8
Actual Consumo		83 mA @ 5 VDC	130 mA @ 5 VDC	130 mA @ 5 VDC	196 mA @ 5 VDC	205 mA @ 5 VDC	220 mA @ 5 VDC
Nivel alto Vol. De entradatage		15~28VDC	15~28VDC	15~28VDC	N/A	N/A	N/A
NIVEL BAIXO Vol. De entradatage		0~5 VDC	0~5 VDC	0~5 VDC	N/A	N/A	N/A
Saída Voltage		N/A	11~28VDC	11~28VDC	11~28VDC	11~28VDC	250VAC/ 30VDC
Saída Actual		N/A	0.5A per channel (Max 4A)	0.5A per channel (Max 4A)	0.5A per channel (Max 4A)	0.5A per channel (Max 4A)	2A per channel (Max 8A)
Illamento		Input: Optical Isolation Output: N/A	Input: Optical Isolation Output: Optical Isolation	Input: Optical Isolation Output: Optical Isolation	Input: N/A Output: Optical Isolation	Input: N/A Output: Optical Isolation	Input: N/A Output: Electromagnetic Isolation
Especificación Medio ambiente Certificación	Enclosure Dimensions WxHxD Weight Mount Protection Structure Storage Temperature Operating Temperature Relative Humidity Altitude Vibration Endurance CE UL	Plástico
		27 x 109 x 81 mm
		Aprox. 0.12 kg	Aprox. 0.12 kg	Aprox. 0.12 kg	Aprox. 0.12 kg	Aprox. 0.12 kg	Aprox. 0.13 kg
		Montaxe en carril DIN de 35 mm
		IP20
		-20° ~ 70° C (-4° ~ 158° F)
		0 ° ~ 55 ° C (32 ° ~ 131 ° F)
		10% ~ 90% (sen condensación)
		3,000 m
		10 a 25 Hz (dirección X, Y, Z 2G 30 minutos)
		Marcado CE
		cULus Listado

Motion Control Module		iR-PU01-P
		Dixital entrada/saída	Diferencial entrada/saída
Lóxica de entrada		Sink Input	Entrada diferencial
Número de entradas		4	3 (A/B/Z phase)
Lóxica de saída		Saída da fonte	Saída diferencial
Número		4	2 (A/B phase)
de Saídas
Nivel alto		15~28 VDC	–
Vol. De entradatage
NIVEL BAIXO		0~5 VDC	–
Vol. De entradatage
Corrente de entrada		24 V CC, 5 mA	Meets the Requirements of ANSI Standards TIA/EIA-485-A
Impedancia de entrada		3 KW	–
Indicadores		Red LED Input State
Vol. De saídatage		24VDC	Meets the Requirements of ANSI Standards TIA/EIA-485-A
Corrente de saída		50 mA
Máx. frecuencia de entrada		200 kHz	2 MHz
Max. Output frequency		40 kHz	2 MHz
Number of Axis Specification	PCB Coating Enclosure Dimensions WxHxD Weight Mount Protection Structure Storage Temperature Operating Temperature Relative Humidity Altitude Vibration Endurance	1- Axis
		Si
		Plástico
		27 x 109 x 81 mm
		Aprox. 0.12 kg
		Montaxe en carril DIN de 35 mm
Medio ambiente		IP20
		-20° ~ 70° C (-4° ~ 158° F)
		0 ° ~ 55 ° C (32 ° ~ 131 ° F)
		10% ~ 90% (sen condensación)
		3,000 m
		10 a 25 Hz (dirección X, Y, Z 2G 30 minutos)
Certificación		Marcado CE
		cULus Listado

Analog I/O Module		iR-AI04-VI	iR-AM06-VI	iR-AQ04-VI
Number of Analog Inputs Number of Analog outputs Current Consumption Fonte de alimentación analóxica		4 (±10 V/ ±20 mA)	4 (±10 V/ ±20 mA)	0
		0	2 (±10 V/ ±20 mA)	4 (±10 V/ ±20 mA)
		70 mA @ 5 VDC	70 mA @ 5 VDC	65 mA @ 5 VDC
		24 VDC(20.4 VDC~28.8 VDC) (-15%~+20%)
Especificación Medio ambiente Certificación	PCB Coating Enclosure Dimensions WxHxD Weight Mount Protection Structure Storage Temperature Operating Temperature Relative Humidity Altitude Vibration Endurance	Si
		Plástico
		27 x 109 x 81 mm
		Aprox. 0.12 kg
		Montaxe en carril DIN de 35 mm
		IP20
		-20° ~ 70° C (-4° ~ 158° F)
		0 ° ~ 55 ° C (32 ° ~ 131 ° F)
		10% ~ 90% (sen condensación)
		3,000 m
		10 a 25 Hz (dirección X, Y, Z 2G 30 minutos)
		Marcado CE
		cULus Listado

Temperatura Módulo	iR-AI04-TR
Número de canles de entrada Consumo actual Fonte de alimentación analóxica	4 (RTD/Thermocouple)
	65 mA @ 5 VDC
	24 VDC(20.4 VDC~28.8 VDC) (-15%~+20%)
Especificación  PCB Coating Enclosure Dimensions WxHxD Weight Mount Medio ambiente   Protection Structure Storage Temperature Operating Temperature Relative Humidity Altitude Vibration Endurance Certificación  CE UL	Si
	Plástico
	27 x 109 x 81 mm
	Aprox. 0.12 kg
	Montaxe en carril DIN de 35 mm
	IP20
	-20° ~ 70° C (-4° ~ 158° F)
	0 ° ~ 55 ° C (32 ° ~ 131 ° F)
	10% ~ 90% (sen condensación)
	3,000 m
	10 a 25 Hz (dirección X, Y, Z 2G 30 minutos)
	Marcado CE
	cULus Listado

*CODESYS® is a trademark of CODESYS GmbH.
*Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

www.weintekiiot.com
Tel: +886-2-22286770 ｜ Fax: +886-2-22286771
Vendas: salesmail@weintek.com ｜ Product Support: servicemail@weintek.com
Address: 14F., No. 11, Qiaohe Rd., Zhonghe Dist., New Taipei City 235029, Taiwan, R.O.C.
WEINTEK and the WEINTEK logos are trademarks or registered trademarks of Weintek Labs., Inc. in many countries.
© 2025 Todos os dereitos reservados.

Documentos/Recursos

WEINTEK cMT X Series Data Display Machine Control [pdfGuía do usuario cMT X Series, cMT X Series Data Display Machine Control, Data Display Machine Control, Display Machine Control, Machine Control

Referencias

• Manual de usuario