cMT X Series Data Display Machine Control
Guida d'usu
cMT X Series Data Display Machine Control
Weintek HMI + CODESYS SoftPLC
Weintek Integrates CODESYS into HMIs:
All-in-One Control for HMI + PLC + I/O Solutions
Why CODESYS Soft PLC ?
- CODESYS, the world’s most widely used Soft PLC platform, supports all five IEC 61131-3 languages and integrates PLC programming, object-oriented development, visualization, motion control, and safety into one intuitive interface.
- Its open architecture and strong extensibility enable seamless integration with major industrial protocols and easy adaptation to diverse automation devices and controllers. This scalable control solution is key to smart manufacturing.
- CODESYS stands as the global Soft PLC market leader, and Soft PLC solution is set to grow steadily, securing even greater market share in the years ahead.
Applicazioni Chjave:
- Automation Factory
- Automation Mobile
- Energy Automation
- Production Automation
- Automation Building
Avanzàtages di Weintek + CODESYS Solution
- Powerful Development Platform for Simplified Integration
CODESYS provides a universal, open development environment that supports over 500 controller brands and thousands of devices, enabling logic control on a single platform. Combined with Weintek Easy Builder Pro for HMI graphic design, it allows developers to greatly reduce time and cost for integration. - Software-Defined Architecture for Enhanced Control Capabilities By fully software-enabling traditional PLC functions, CODESYS turns Weintek HMIs into powerful control centers—no extra PLC hardware needed. With native support for Ether CAT, CANopen, and Modbus TCP, it delivers seamless
communication, direct servo control, and modular, high-performance motion
- All-in-One Solution for Automation and IIoT Applications
Beyond programming, visualization, and communication, CODESYS combined with Weintek’s Encloud enables remote monitoring and cloud connectivity-accelerating smart manufacturing and AIoT deployment. - Proven Control Foundation for Global Reliability
Trusted by hundreds of thousands of developers worldwide and adopted by leading manufacturers, CODESYS combined with Weintek Ir Series Remote 1/0 modules delivers a stable, scalable control architecture for modern automation.
Dual OS Architecture for Versatile Performance
Independent Operating Systems: Linux + RTOS
An HMI with dual functionality of display and PLC control. Thanks to its independent operating system design, even if one side fails, the other can continue running normally.
Internal Communication Architecture
Direct internal pass-through communication between the HMI and PLC via Easy Builder Pro enables the HMI to control end machinery and equipment.
Ir Series
The iR Series offers couplers, digital I/O, and analog I/O modules with the performance and reliability to meet market demands.
Key Features of Remote I/O Modules
| Weintek Coupler | Weintek I/O Module |
| IR-ETN (Modbus TCP/Ether Net/IP) Modbus TCP: The classic protocol for industrial devices and general manufacturing automation. Ether Net/IP: Built on TCP/IP and CIP for strong compatibility, multi-topology support, and seamless IT integration-widely adopted in factory automation. |
Modulu digitale Input Digitale: Sink & Source Digital Output: Sink, Source & Relay |
| IR-COP (CANopen Slave) Simple structure with excellent real-time performance, ideal for embedded systems and high-reliability equipment such as medical and automotive devices. |
Modulu analogicu Wide Voltage & Current Range: Voltage: -10 à 10 V Current: -20 to 20 mA |
| IR-ECAT (Ether CAT Slave) Ultra-low latency with tight synchronization, supporting multi-node daisy-chain topologies-perfect for high-speed, precision motion control, robotics, and automated assembly. |
Temperature Thermocouple (TC) and RTD Type Compatibility User-defined Table Support |
| 3rd Party PROFINET Coupler High-speed real-time networking with multi-topology support and large-device capacity, suited for complex, high-speed automation systems. |
Motion Control Single-Axis Motion Control Support |
Exclusive Function Blocks
Applicazioni Industria
Smart Farm Irrigation Systems
The Smart Farm Irrigation System is a mobile intelligent irrigation solution built with Weintek cT X Series HMI and CODESYS Softly. Using Modbus TCP/IP, it controls iR Series I/O modules (iR-ETN, DI, DQ, AM). Featuring modular design, high flexibility, and smart control, it is ideal for precision agriculture and environmental monitoring.
Beneficii chjave
 |
Centralized Control with Visual Interface |
 |
Smart and Efficient Irrigation via Closed-Loop Control |
 |
Remote Management with Instant Alerts |
 |
Modular I/O Design for Easy and Flexible Expansion |
Soluzioni
CMT X HMI + CODESYS Soft PLC
The CMT X HMI provides high-performance control with an intuitive graphical interface.
Modbus TCP/IP Integration + IR-ETN Coupler
iR-ETN serves as a Modbus TCP/IP slave to aggregate DI, DQ, and AM module data for the master.
Sensors + Irrigation Loop Control
DI modules read soil moisture valve on/off signal and flow-switch signals; AM modules capture analog data (e.g., humidity %, pressure); DQ modules drive valves and pumps.
Remote Monitoring + Data Logging
The CMT X HMI supports Easy Access 2.0, multi-protocol databases, and MQTT/OPC UA to export field data to the cloud or central SCADA.
Applicazioni Industria
Water-Cooled Pressure Test Stations
An automated leak and pressure testing system was developed for water-cooled components in server, automotive, and high-power equipment production. Integrating Weintek HMI with CODESYS Soft PLC, the solution ensures precise control and monitoring, addressing challenges like parameter variability, scattered data, and human error to enhance testing efficiency and reliability.
Beneficii chjave
 |
Streamlined Test Automation for Higher Efficiency |
 |
Integrated Data Logging with Traceable Reporting |
 |
Flexible Configuration for Seamless Equipment Integration |
 |
Multi-Level Access with Visual Alerts for Error Prevention |
Soluzioni
CMTXHMI+ Bidirectional Communication
The visual interface exchanges test data with the Soft PLC in real time and supports trend display, alarms, and logging.
CODESYS Soft PLC + Ether CAT Control
The controller serves as an Ether CAT master to control iR modules with high-speed, real-time response.
Automated Test Logic + Alarm Handling
The PLC executes staged pressure control and triggers NG alarms when faults are detected.
Sensor Integration + HMI Data Logging
The DI/Al modules collect sensor signals, while the HMI performs threshold checks and records results.
Applicazioni Industria
Cleanroom Fan Filter Unit Monitoring Systems
Designed for pharmaceutical, semiconductor, and precision industries, this cleanroom FFU and monitoring solution leverages Weintek HMI with CODESYS Soft PLC to optimize environmental control. It reduces energy waste, enables centralized monitoring, and supports remote maintenance—boosting efficiency, stability, and smart energy management.
Beneficii chjave
 |
EC Fans with Closed-Loop Control for Energy Saving |
 |
Remote Monitoring with Historical Data Management |
 |
Auto Alerts and Fan Calibration for Cleanroom Stability |
 |
Graphical HMI with Role-Based Access for Easy Maintenance |
Soluzioni
Centric Control + CODESYS Soft PLC
The CMT X HMI enables multi-zone FFU monitoring and control via touchscreen interface.
Closed-Loop Feedback + Modbus Monitoring
The system reads airflow, differential pressure, and RPM for real-time auto calibration.
Integrated Sensing + Data Logging
Temperature, humidity, pressure, and particle data are fed into the HMI for alerts and records.
Adaptive Energy Management + EC Motor Control
Smart control dynamically adjusts fan speed and air exchange rates for optimized efficiency.
IR Series Specifications
| Modulu Coupler | iR-ETN | iR-COP | iR-ECAT | |
| Espansione Modulu I/O | Number of Bus Terminals Digital Input Point Digital Output Point Analog Input Channel Analog Output Channel | Depends on Power Consumption | ||
| Max. 256 | ||||
| Max. 128 | ||||
| Max. 64 | ||||
| Max. 64 | ||||
| Rate di trasferimentu di dati | 10/100 Mbps | 50k~1 Mbps | 100 Mbps | |
| Max. Number of TCP/IP Connections | 8 Cunnessioni | – | – | |
| Protocolu | Modbus TCP/IP Server, Ether Net/IP adapter | CANopen Slave | Ether CAT Slave | |
| Isulamentu | Network to Logic Isolation : Yes | CAN bus Isolation : Yes | Network to Logic Isolation : Yes | |
| putenza | Alimentazione elettrica Power Consumption Current for Internal Bus Current Consumption Power Isolation Back-up Fuse |
24 V CC (-15%/+20%) | ||
| Nominal 100mA@24VDC | ||||
| Max 2A@5VDC | ||||
| 220mA @ 5VDC | 170mA @ 5VDC | 270mA @ 5VDC | ||
| Iè | ||||
| £ 1.6A Self-recovery | ||||
| Specificazione | PCB Coating Enclosure Dimensions WxHxD Pesu Munti |
Iè | ||
| Plastica | ||||
| 27 x 109 x 81 mm | ||||
| Circa. 0.15 kg | ||||
| 35mm DIN rail mounting | ||||
| Ambiente | Struttura di prutezzione Temperature di almacenamiento Operating Temperature Relative Humidity Altitude Resistenza à e vibrazioni |
IP20 | ||
| -20 ° ~ 70 ° C (-4 ° ~ 158 ° F) | ||||
| 0 ° ~ 55 ° C (32 ° ~ 131 ° F) | ||||
| 10% ~ 90% (senza condensazione) | ||||
| 3,000 m | ||||
| 10 à 25Hz (direzzione X, Y, Z 2G 30 minuti) | ||||
| Certificazione | CE | Marcatu CE | ||
| UL | Listed cULus | |||
| Modulu Coupler | iR-ETN40R | iR-ETN40P | |
| Expansion I/O Module | No. of Bus Terminals Digital Input Point Digital Output Point Analog Input Channel Analog Output Channel Data Transfer Rate Max. Number of TCP/IP Connections Protocol Network to Logic Isolation No. of Ports Total Number of Outputs Output Type Output Voltage Output Current Response Time Isolation Total Number of Outputs Output Type Output Voltage Output Current Max. Output Frequency Isolation Total Number of Inputs Isolation Total Number of Inputs Input Type Logic 1 Input Voltage Logic 0 Input Voltage Response Time Total Number of Inputs Input Type Logic 1 Input Voltage Logic 0 Input Voltage Max. Input Frequency | Depends on Power Consumption | |
| Max. 224 | |||
| Max. 112 | |||
| Max. 64 | |||
| Max. 64 | |||
| Interfaccia di cumunicazione | 10/100 Mbps | ||
| Specificazioni | |||
| 8 cunnessione | |||
| Modbus TCP Server, EtherNet/IP adapter | |||
| Iè | |||
| 1 | |||
| Output Digital | 16 | ||
| Relè | Fonte | ||
| 250VAC/30VDC | 11 ~ 28 VDC | ||
| 2A per channel (Max 8A) | 0.5A per channel (Max 4A) | ||
| 10 ms | OFF->ON: 100 μs, ON->OFF: 600 μs | ||
| Yes, electromagnetic isolation | Yes, optocoupler isolation | ||
| High-speed Output | 0 | 2 | |
| N/A | Fonte | ||
| N/A | 5 VDC | ||
| N/A | 50 mA per canale | ||
| N/A | 40 kHz | ||
| N/A | Yes, optocoupler isolation | ||
| Input Digitale | 24 | ||
| Yes, optical isolation | |||
| Input Generale | 20 | ||
| Lavamanu o Fonte | |||
| 15 ~ 28 VDC | |||
| 0 ~ 5 VDC | |||
| OFF->ON: 5 ms, ON->OFF: 1 ms | |||
| High-speed Input | 4 | ||
| SINK INPUT (PNP) | |||
| 15 ~ 28 VDC | |||
| 0 ~ 5 VDC | |||
| 20 kHz | |||
| putenza | Alimentazione elettrica | 24 V CC (-15%/+20%) | |
| Cunsumu d'energia | Nominal 255mA@24VDC, Max. 540mA@24VDC |
Nominal 100mA@24VDC, Max. 530mA@24VDC |
|
| Current for-Internal Bus | Max. 2A @ 5VDC | ||
| Cunsumu attuale | 520mA @ 5VDC | 350mA ＠ 5VDC | |
| Isolamentu Elettricu | Logic to Field Power Isolation: Yes | ||
| Back‐up Fuse | £ 1.6A Self-recovery | ||
| Specificazione | Rivestimentu di PCB | Iè | |
| Enclosure | Plastica | ||
| Dimensioni LxAxP | 64 x 109 x 81 mm | ||
| Pesu | Circa. 0.27 kg | ||
| Munti | 35mm DIN rail mounting | ||
| Ambiente | Struttura di prutezzione | IP20 | |
| Temperature di almacenamiento | -20 ° ~ 70 ° C (-4 ° ~ 158 ° F) | ||
| Temperature di funziunamentu | -10° ~ 60° C (14° ~ 140° F) | ||
| Umidità Relativa | 10% ~ 90% (senza condensazione) | ||
| Altitudine | 3,000 m | ||
| Resistenza à e vibrazioni | 10 à 25Hz (direzzione X, Y, Z 2G 30 minuti) | ||
| Certificazione | CE | Marcatu CE | |
| UL | Listed cULus | ||
| EtherNet/IP | ODVA Conformance Test | ||
| Digital I/O Module | iR-DI16-K | iR-DM16-P | iR-DM16-N | iR-DQ16-P | iR-DQ16-N | iR-DQ08-R | |
| Logica di input | Lavamanu o Fonte | Lavamanu o Fonte | Lavamanu o Fonte | N/A | N/A | N/A | |
| Numaru di Inputs | 16 | 8 | 8 | 0 | 0 | 0 | |
| Logica di output | N/A | Fonte | Lavà | Fonte | Lavà | Relè | |
| Numaru di Outputs | 0 | 8 | 8 | 16 | 16 | 8 | |
| currente Cunsumu | 83mA @ 5VDC | 130mA @ 5VDC | 130mA @ 5VDC | 196mA @ 5VDC | 205mA @ 5VDC | 220mA @ 5VDC | |
| Livellu ALTU Input Voltage | 15 ~ 28 VDC | 15 ~ 28 VDC | 15 ~ 28 VDC | N/A | N/A | N/A | |
| Livellu BASSU Input Voltage | 0 ~ 5 VDC | 0 ~ 5 VDC | 0 ~ 5 VDC | N/A | N/A | N/A | |
| Output Voltage | N/A | 11 ~ 28 VDC | 11 ~ 28 VDC | 11 ~ 28 VDC | 11 ~ 28 VDC | 250VAC/ 30VDC | |
| Output currente | N/A | 0.5A per channel (Max 4A) | 0.5A per channel (Max 4A) | 0.5A per channel (Max 4A) | 0.5A per channel (Max 4A) | 2A per channel (Max 8A) | |
| Isulamentu | Input: Optical Isolation Output: N/A | Input: Optical Isolation Output: Optical Isolation | Input: Optical Isolation Output: Optical Isolation | Input: N/A Output: Optical Isolation | Input: N/A Output: Optical Isolation | Input: N/A Output: Electromagnetic Isolation | |
| Specificazione Ambiente Certificazione |
Enclosure Dimensions WxHxD Weight Mount Protection Structure Storage Temperature Operating Temperature Relative Humidity Altitude Vibration Endurance CE UL |
Plastica | |||||
| 27 x 109 x 81 mm | |||||||
| Circa. 0.12 kg | Circa. 0.12 kg | Circa. 0.12 kg | Circa. 0.12 kg | Circa. 0.12 kg | Circa. 0.13 kg | ||
| 35mm DIN rail mounting | |||||||
| IP20 | |||||||
| -20 ° ~ 70 ° C (-4 ° ~ 158 ° F) | |||||||
| 0 ° ~ 55 ° C (32 ° ~ 131 ° F) | |||||||
| 10% ~ 90% (senza condensazione) | |||||||
| 3,000 m | |||||||
| 10 à 25Hz (direzzione X, Y, Z 2G 30 minuti) | |||||||
| Marcatu CE | |||||||
| Listed cULus | |||||||
| Motion Control Module | iR-PU01-P | ||
| Digitale
input/output |
Differentiale
input/output |
||
| Logica di input | Sink Input | Input differenziale | |
| Numaru di inputs | 4 | 3 (A/B/Z phase) | |
| Logica di output | Surghjente Output | Output differenziale | |
| numeru | 4 | 2 (A/B phase) | |
| di Outputs | |||
| Livellu ALTU | 15 ~ 28 VDC | – | |
| Input Voltage | |||
| Livellu BASSU | 0 ~ 5 VDC | – | |
| Input Voltage | |||
| Input currente | 24 VDC, 5 mA | Meets the Requirements of ANSI Standards TIA/EIA-485-A | |
| Impedenza di input | 3 KW | – | |
| Indicatori | Red LED Input State | ||
| Uscita Voltage | 24 VDC | Meets the Requirements of ANSI Standards
TIA/EIA-485-A |
|
| Corrente di Output | 50 mA | ||
| Max. frequenza di input | 200 kHz | 2 MHz | |
| Max. Output frequency | 40 kHz | 2 MHz | |
| Number of Axis Specification | PCB Coating Enclosure Dimensions WxHxD Weight Mount Protection Structure Storage Temperature Operating Temperature Relative Humidity Altitude Vibration Endurance | 1- Axis | |
| Iè | |||
| Plastica | |||
| 27 x 109 x 81 mm | |||
| Circa. 0.12 kg | |||
| 35mm DIN rail mounting | |||
| Ambiente | IP20 | ||
| -20 ° ~ 70 ° C (-4 ° ~ 158 ° F) | |||
| 0 ° ~ 55 ° C (32 ° ~ 131 ° F) | |||
| 10% ~ 90% (senza condensazione) | |||
| 3,000 m | |||
| 10 à 25Hz (direzzione X, Y, Z 2G 30 minuti) | |||
| Certificazione | Marcatu CE | ||
| Listed cULus | |||
| Analog I/O Module | iR-AI04-VI | iR-AM06-VI | iR-AQ04-VI | |
| Number of Analog Inputs Number of Analog outputs Current Consumption Alimentazione Analogica | 4 (±10V/ ±20mA) | 4 (±10V/ ±20mA) | 0 | |
| 0 | 2 (±10V/ ±20mA) | 4 (±10V/ ±20mA) | ||
| 70mA @ 5VDC | 70mA @ 5VDC | 65mA @ 5VDC | ||
| 24 VDC(20.4 VDC~28.8 VDC) (-15%~+20%) | ||||
| Specificazione Ambiente Certificazione |
PCB Coating Enclosure Dimensions WxHxD Weight Mount Protection Structure Storage Temperature Operating Temperature Relative Humidity Altitude Vibration Endurance | Iè | ||
| Plastica | ||||
| 27 x 109 x 81 mm | ||||
| Circa. 0.12 kg | ||||
| 35mm DIN rail mounting | ||||
| IP20 | ||||
| -20 ° ~ 70 ° C (-4 ° ~ 158 ° F) | ||||
| 0 ° ~ 55 ° C (32 ° ~ 131 ° F) | ||||
| 10% ~ 90% (senza condensazione) | ||||
| 3,000 m | ||||
| 10 à 25Hz (direzzione X, Y, Z 2G 30 minuti) | ||||
| Marcatu CE | ||||
| Listed cULus | ||||
| Temperature Modulu | iR-AI04-TR |
| Numaru di Canali Input Cunsumu attuale Alimentazione Analogica |
4 (RTD/Thermocouple) |
| 65mA @ 5VDC | |
| 24 VDC(20.4 VDC~28.8 VDC) (-15%~+20%) | |
| Specificazione PCB Coating Enclosure Dimensions WxHxD Weight Mount Ambiente Protection Structure Storage Temperature Operating Temperature Relative Humidity Altitude Vibration Endurance Certificazione CE UL |
Iè |
| Plastica | |
| 27 x 109 x 81 mm | |
| Circa. 0.12 kg | |
| 35mm DIN rail mounting | |
| IP20 | |
| -20 ° ~ 70 ° C (-4 ° ~ 158 ° F) | |
| 0 ° ~ 55 ° C (32 ° ~ 131 ° F) | |
| 10% ~ 90% (senza condensazione) | |
| 3,000 m | |
| 10 à 25Hz (direzzione X, Y, Z 2G 30 minuti) | |
| Marcatu CE | |
| Listed cULus |
*CODESYS® is a trademark of CODESYS GmbH.
*Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
www.weintekiiot.com
Tel: +886-2-22286770 ｜ Fax: +886-2-22286771
Vendite: salesmail@weintek.com ｜ Product Support: servicemail@weintek.com
Address: 14F., No. 11, Qiaohe Rd., Zhonghe Dist., New Taipei City 235029, Taiwan, R.O.C.
WEINTEK and the WEINTEK logos are trademarks or registered trademarks of Weintek Labs., Inc. in many countries.
© 2025 Tutti i diritti riservati.
Documenti / Risorse
 |
WEINTEK cMT X Series Data Display Machine Control [pdfGuida di l'utente cMT X Series, cMT X Series Data Display Machine Control, Data Display Machine Control, Display Machine Control, Machine Control |