WINGBO specializes in modern lighting fixtures and energy-efficient DC motor ceiling fans designed for contemporary indoor living spaces.
WINGBO is a manufacturer of home lighting and ventilation products, best known for its stylish ceiling fans and decorative wall fixtures. The brand focuses on combining modern aesthetics with functional performance, utilizing silent DC motors in many of their ceiling fan models to deliver energy efficiency and quiet air circulation. WINGBO’s product catalog includes a wide variety of designs ranging from industrial cage fans and farmhouse-style wood blade fans to elegant crystal chandeliers and rattan-wrapped wall sconces.
Designed for residential use, WINGBO products often feature remote control functionality, reversible motors for seasonal comfort, and integrated LED lighting. The brand caters to DIY enthusiasts and homeowners seeking affordable yet sophisticated upgrades for bedrooms, living rooms, and bathrooms. Support is typically provided directly through email channels, ensuring assistance with installation, parts, and warranty claims.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To enter learning code matching mode, turn on the power supply. Within 30 seconds, press and hold the emitter's 'power' button for about 5 seconds until you hear a long 'beep' sound. This indicates the remote has successfully paired with the receiver.
Ensure all screws on the motor casing, blade brackets, and downrod are tightened securely. Check that wire nut connections are not rubbing against the switch housing. Allow a 24-hour 'run-on period' for new fans to settle. If the motor makes a friction sound, you may lightly tap the edges of the motor screws with a rubber hammer or contact support.
Bulb requirements vary by model. Many WINGBO wall sconces and vanity lights use E12 or E26 sockets. Always check the specific rating on your fixture’s socket ring or manual (e.g., Max 40W or 60W) and do not exceed the recommended wattage to avoid fire hazards.
Check if the batteries are installed correctly and have sufficient power (low voltage can affect sensitivity). Ensure there are no other similar remote-controlled products nearby causing interference. If the fan beeps upon power-up but does not respond, try the pairing process again.