WINGBO SYCF48113
WINGBO 48" Outdoor Ceiling Fan with Lights - Instruction Manual
Model: SYCF48113
Introduction
Thank you for choosing the WINGBO 48" Outdoor Ceiling Fan with Lights. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new ceiling fan. Please read all instructions carefully before beginning installation and retain this manual for future reference.
This fan is designed for both indoor and outdoor use in wet-rated environments, featuring a quiet DC motor, 6-speed settings, reversible airflow, and an integrated LED light with 3 color temperatures and dimming capabilities.
Important Safety Information
- WARNING: To reduce the risk of electric shock, ensure electricity is turned off at the circuit breaker or fuse box before installation.
- All wiring must be in accordance with national and local electrical codes. Consult a qualified electrician if you are unsure about wiring.
- The fan must be mounted to a structurally sound ceiling junction box capable of supporting the fan's weight (refer to specifications for weight).
- Do not install on gypsum ceilings.
- Ensure the fan blades are at least 7 feet (2.1 meters) from the floor.
- Do not insert objects into the path of the fan blades.
- The remote control requires 2 AAA batteries (not included).
- This fan is suitable for wet locations, but ensure all electrical connections are properly sealed and protected from direct water exposure.
Package Contents
Verify that all components are present before beginning installation:
- Ceiling Fan Motor Assembly
- 3 ABS Blades
- LED Light Kit
- Remote Control
- Downrods (4.5" and 12")
- Mounting Hardware
- Instruction Manual

Figure 1: Ceiling Fan Dimensions and Included Downrods (4.5" and 12"). This image illustrates the fan's overall size and the two downrod options for different ceiling heights, along with examples of flat and sloped mount installations.
Setup and Installation
Before You Begin: Ensure power is disconnected at the circuit breaker. Read the entire safety section.
1. Mounting the Fan
The fan can be installed using either the 4.5-inch or 12-inch downrod, depending on your ceiling height and preference. It supports both flat and sloped ceiling mounts (for slopes less than 15 degrees).
- Securely attach the mounting bracket to a fan-rated junction box.
- Assemble the chosen downrod to the motor assembly, ensuring all screws are tightened.
- Carefully lift the fan assembly and hang it from the mounting bracket.
Video 1: WINGBO 48" Outdoor Ceiling Fan Installation Guide. This video provides a visual walkthrough of the installation process, including mounting the fan and connecting wiring.
2. Electrical Connections
Connect the fan's electrical wires to your household wiring according to the provided wiring diagram in the full manual. Ensure all connections are secure and insulated.
3. Attaching the Blades
Attach the three ABS blades to the motor housing using the provided screws. Ensure they are firmly secured to prevent wobbling during operation.

Figure 2: Premium ABS Blades and Waterproof Coating. This image highlights the durable, waterproof ABS blades and the protective coating on the fan, designed for wet environments.
4. Installing the LED Light Kit
Connect the LED light kit to the fan's wiring and secure it to the bottom of the motor housing.
5. Remote Control Setup
Insert 2 AAA batteries (not included) into the remote control. The remote is pre-paired with the fan. If pairing is required, refer to the specific instructions in the full manual.
Operating Instructions
Your WINGBO ceiling fan is controlled primarily by the included remote control. A standard wall switch can only control the fan's overall ON/OFF power.
Remote Control Functions:
- ON/OFF: Turns the fan and light on or off.
- Fan Speed: Select from 6 adjustable speeds (LV1-LV6) for desired airflow.
- Timer: Set the fan to turn off automatically after 1, 4, or 8 hours.
- Forward/Reverse: Changes the direction of blade rotation for seasonal use.
- Summer Mode (Downward Airflow): Creates a cooling breeze.
- Winter Mode (Upward Airflow): Circulates warm air trapped near the ceiling.
- Light ON/OFF: Controls the integrated LED light.
- 3CCT (Color Temperature): Cycle through 3000K (Warm White), 4000K (Neutral White), and 6000K (Cool White).
- Dimming: Adjust the light brightness from 10% to 100%.
- Natural Wind Mode: Simulates a natural breeze by varying fan speed.

Figure 3: Remote Control Features. This image displays the remote control and its various functions, including 6 wind speeds, timer, reversible DC motor, 3 color temperatures, and stepless dimming.

Figure 4: 6-Speed and Reversible Function. This diagram shows how the fan's reversible motor provides downward airflow for cooling in summer and upward airflow for heat circulation in winter.

Figure 5: 3-Color Temperature and Dimmable LED. This image illustrates the three available light color temperatures (3000K, 4000K, 6000K) and the 10%-100% dimming capability of the integrated LED light.
Maintenance
- Cleaning: To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Blade Care: The ABS blades are waterproof and durable. Periodically check for any accumulation of dust or debris and clean as needed.
- Tightness: Periodically check all screws and connections for tightness. Re-tighten as necessary.
- Motor: The DC motor is designed for long-term, quiet operation and requires no lubrication.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start. | No power to the fan; loose wire connections; remote control not paired or dead batteries. | Check circuit breaker. Ensure all wiring connections are secure. Replace remote batteries or re-pair remote. |
| Fan wobbles. | Loose blade screws; uneven blade balance; loose mounting bracket. | Ensure all blade screws are tight. Check mounting bracket for secure installation. Use a balancing kit if necessary (not included). |
| Light does not work. | Loose wire connection to light kit; LED driver issue. | Check light kit wiring connections. If problem persists, contact customer support. |
| Remote control not responding. | Dead batteries; remote not paired; interference. | Replace AAA batteries. Re-pair remote control. Ensure no obstructions between remote and receiver. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact WINGBO customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | WINGBO |
| Model Number | SYCF48113 |
| Product Dimensions | 48"D x 48"W x 20.39"H |
| Blade Material | ABS Plastic |
| Number of Blades | 3 |
| Motor Type | DC Motor |
| Number of Speeds | 6 |
| Noise Level | 25 Decibels |
| Wattage | 30 watts |
| Voltage | 120 Volts |
| Light Type | Integrated LED |
| Color Temperature | 3000K/4000K/6000K (3CCT) |
| Dimming Range | 10%-100% |
| Control Method | Remote Control |
| Mounting Type | Downrod Mount |
| Indoor/Outdoor Usage | Indoor, Outdoor (Wet Rated) |
| Special Features | LED Light, Remote Controlled, Timer, Waterproof, Wet Rated, Reversible Motor |

Figure 6: Powerful & Quiet Efficient DC Motor. This image illustrates the DC motor's design, highlighting its energy efficiency (80% savings compared to AC motors) and quiet operation (under 30 dB).
Warranty and Support
WINGBO stands behind the quality of its products. Your WINGBO 48" Outdoor Ceiling Fan comes with the following warranty:
- Motor: 10-year warranty.
- Whole Fan (excluding motor): 3-year warranty.
For any questions, technical assistance, or warranty claims, please contact WINGBO customer support. We offer a 24-hour quick online reply to resolve your problems immediately.

Figure 7: WINGBO Service. This image outlines the customer support commitment, including 24-hour online reply, a 3-year warranty for the whole fan, and a 10-year warranty for the motor.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.