Zbtlink specializes in wireless networking solutions, producing 4G/5G LTE routers, Wi-Fi 6 systems, and openWRT-compatible hardware for home, vehicle, and industrial use.
Zbtlink (Shenzhen Zhibotong Electronics Co., Ltd.) is a manufacturer of networking equipment dedicated to wireless Internet of Things (IoT) solutions. The company produces a wide range of devices including openWRT wireless routers, 4G and 5G LTE routers, vehicle-mounted Wi-Fi units, and outdoor CPE bridges. Zbtlink products are designed for versatility, often featuring SIM card slots for cellular data, rugged metal enclosures for industrial environments, and detachable antennas for enhanced signal coverage.
Focused on both consumer and industrial markets, Zbtlink provides connectivity solutions for rural internet access, vending machines, transportation, and enterprise networks. Their routers typically support customizable firmware like OpenWRT, making them popular among enthusiasts and integrators requiring flexible network management.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
The default management IP address is usually 192.168.1.1. The default username and password are typically both 'admin'. Check the label on the bottom of the device for specific details.
Ensure the router is powered off before inserting the SIM card. Verify that the chip faces the direction indicated by the icon near the slot. If using a nano or micro SIM, ensure it fits securely in the adapter/holder provided. If the issue persists, check if the SIM requires a PIN or is locked.
Check if your SIM card requires a specific APN (Access Point Name) setting; you can obtain this from your carrier and enter it in the Network/3G 4G LTE settings. Also, verify that the router's frequency bands are compatible with your local carrier.
Locate the Reset button on the device (usually on the back). While the router is powered on, press and hold the button for about 10 seconds until the LED indicators flash, then release it to restore factory settings.