UHPPOTE Manuals & User Guides
Manufacturer of access control systems including RFID readers, electric locks, and secure entry keypads.
About UHPPOTE manuals on Manuals.plus
UHPPOTE is a provider of professional access control and security solutions, specializing in RFID technology, electric locks, and door entry systems. The company offers a wide range of products including proximity card readers, standalone keypads, electromagnetic locks, and wireless remote control switches tailored for residential and commercial security applications.
Frequently associated with HOBK Electronic Technology, UHPPOTE focuses on delivering reliable and affordable hardware for building management, often compatible with smart home ecosystems like Tuya and eWeLink.
UHPPOTE manuals
Latest manuals from manuals+ curated for this brand.
UHPPOTE HBK-D01 Proximity Rfid Card Reader User Manual
UHPPOTE HBK-D04 RFID Card Reader User Manual
UHPPOTE HBK-D02K Wiegand Rfid Reader User Manual
UHPPOTE HBK-RW01 Remote Control User Manual
UHPPOTE HBK-R04T Touch Screen Wireless Remote Control User Manual
UHPPOTE HBK-A03 RFID Door Access Control Keypad Card Reader User Manual
UHPPOTE HBK-R01 Access Control Outswinging User Manual
UHPPOTE HBK-P01 Door Access Control Power Supply User Manual
UHPPOTE HBK-A02W Wi-Fi Door Access Control Keypad Proximity Card Reader User Manual
UHPPOTE HBK-A02W Access Control Keypad User Manual
UHPPOTE HBK-D01 Wiegand RFID Reader User Manual and Installation Guide
UHPPOTE HBK-A04T 2.4-inch TFT RFID Access Control Terminal User Manual
UHPPOTE HBK-A01 Access Control Keypad User Manual
UHPPOTE HBK-A02 Access Control Keypad User Manual
UHPPOTE HBK-V006 WiFi Smart Switch User Manual
UHPPOTE HBK-P01 Switching Power Supply User Manual
UHPPOTE HBK-R01 Remote Control User Manual
UHPPOTE HBK-D02K Wiegand RFID Reader User Manual
UHPPOTE HBK-A03 Access Control Keypad User Manual
UHPPOTE HBK-RW01 Remote Control User Manual
UHPPOTE manuals from online retailers
UHPPOTE Proximity RFID Card Reader (Model UT0111-101A) Instruction Manual
UHPPOTE UT0111-08X Wiegand 26-bit 125KHz RFID Proximity Card Reader Instruction Manual
UHPPOTE Normal Closed Wired Screw-Terminal Surface-Mount Magnetic Contact User Manual
UHPPOTE Fail Secure Electric Drop Bolt Lock UT0521-500NO User Manual
UHPPOTE UT-RZ-40NC Normally Closed Wired Magnetic Contact Sensor User Manual
UHPPOTE UT-CPK-861A Resettable Emergency Exit Release Button User Manual
UHPPOTE UT0611-05 Zinc Alloy Door Push To Exit Button Instruction Manual
UHPPOTE HBK-A02 125KHz RFID Access Control Keypad User Manual
UHPPOTE YB-700A Electric Strike Lock User Manual
UHPPOTE Electric Strike Lock UT0511-621 User Manual
UHPPOTE 600lb Outswinging Electric Magnetic Door Lock Kit with RF Remote Control
UHPPOTE AC/DC12-48V 2-Channel 433Mhz RF Wireless Remote Control Switch Instruction Manual
UHPPOTE video guides
Watch setup, installation, and troubleshooting videos for this brand.
310MHz DTC Garage Door Opener Remote Control Setup for Linear Delta 3 Systems
UHPPOTE Door Exit Bar with Alarm & Exterior Lever | Push to Exit Device Features
UHPPOTE Gate Door Wireless Remote Control Switch for Outdoor Use
UHPPOTE RB741 FM135 Wireless Remote Transmitter for Gate Openers - 100ft Range
UHPPOTE support FAQ
Common questions about manuals, registration, and support for this brand.
-
Can UHPPOTE RFID readers work alone?
Most UHPPOTE Wiegand RFID readers (e.g., HBK-D01) cannot work alone; they must be connected to a Wiegand protocol access controller or master panel.
-
How do I reset my UHPPOTE keypad to Wiegand mode?
For models like the HBK-A03, you can typically change to Wiegand mode by entering the programming mode and pressing specific codes (e.g., '82 #') followed by '*'. Refer to your specific user manual for exact codes.
-
Which mobile app works with UHPPOTE WiFi remote controls?
Depending on the model, UHPPOTE devices may use the 'Tuya Smart' app (e.g., HBK-RW01) or the 'eWeLink' app (e.g., HBK-R04T). Check your device manual for the correct app.
-
What does the red LED mean on the card reader?
On many UHPPOTE readers, a solid Red LED indicates the device is in Standby mode and powered on. It typically turns Green when an authorized card is read.