HBK-RW01
REMOTE CONTROLUSER MANUAL

Thank you for choosing the HBK-RW01 remote control provided by us.

Precaution

For avoidance of damage to the product or injury to the people, please carefully read this manual before use and keep it for further reference.
Warnings

• For avoidance of damage to the product, do not expose the product to rain or damp.
• This product is only for indoor use.
• Please use a combination of transmitter and receiver provided by us as we can’t guarantee our transmitters or receivers are fully compatible with other manufacturers products.
• The product installation shall be conducted by a professional electrician as it requires specialized knowledge. Incorrect operation may damage the product, or make it inoperable.
• The transmitter and receiver have been paired with each other in factory.
• Keep this product away from children under 3 year old to prevent ingestion.
• Install the receiver in a place out of touch of children, so as to prevent electric shock.
• Please do not put the battery in water, fire or moisture places for avoidance of explosion.
• The battery contains hazardous substance. Return the waste batteries to the recycling bin to avoid contamination to the environment.

Features

• Specialized for the access control system and unable to be applied to other fields.
• Support connecting external access control keypad.
  (Remarks: Access control keypad is excluded.)
• Built-in buzzer makes sound to remind people when the door is locked or unlocked.
• Built-in WiFi module which enables you to control the HBK-RW01 remotely via free Tuya Smart app.

HBK-RW01 REMOTE CONTROL

Specifications

Receiver
Operating Voltage: 12VDC	Output Current: 1A
Operating Environment: Indoor	Lock Output Port: 1
Exit Button Output Port: 1	Keypad Connection Port: 1
RF Frequency: 433.92MHz	RF Channel: 1
WiFi Standard: 2412-2462MHz	Transmitter Support: Max. 40
DC Encoding Type: Learning Code	Built-in Buzzer: Yes
Time Delay: 0/5/10 seconds	Enclosure Material: ABS Plastic
Ambient Humidity: 0%RH-95%RH(Non-condensing)
Ambient Temperature: -22°F to 140°F
Operating Method: RF Remote and WiFi
Operating Distance: 164 feet without block
Operating Mode: Momentary/Toggle/Latched
Dimensions: 3-37/64″x 2-21/64″x 1-9/64″ [91x59x29mm]

Transmitter
Operating Current: 10mA	Enclosure Material: ABS Plastic
Batteries Type: CR2016 (Built-in)
Transmitting Frequency: 433.92MHz
Operating Voltage: 6VDC (Powered by 2pcs CR2016 batteries)

Wiring Demonstration Diagram

1. Connect Fail-Secure Lock
2. Connect Fail-Safe Lock

Operating Settings

1. Remote Pairing
   Tap RF icon followed by press the button on the transmitter within 20 seconds.
2. Unpairing
   Tap and hold RF icon for 8 seconds.
   Remarks: The operation will clear all paired transmitters, please operate with caution.
3. Lock Type Setting
   NO: Fail-Secure Lock
   NC: Fail-Safe Lock
   Remarks: Incorrect setting will affect operating of the lock, please confirm the lock type before setting.
4. Buzzer Setting
   ON: Enable.
   OFF: Disable.
5. Operating Mode Select
   Momentary: Press button A for ON, Release button A for OFF.
   Latched: Press button A for ON, press button B for OFF.
   Toggle: Press button A for ON, press button A again for OFF.
   Remarks: Latched is only valid when using a transmitter with 2-buttons.
6. Time Delay Setting
   Support 0/5/10 seconds time delay.
   Remarks: Only available when Momentary selected.
7. WiFi Pairing
   Please refer to ‘Tuya Smart’ APP Operation Guide in this manual.

‘Tuya Smart’ APP Operation Guide

1. D ownload Tuya Smart APP
   Search ‘Tuya Smart’ in Apple Store for iOS version or Google Play for Android version.

   http://smart.tuya.com/download

2. Registration and Login
   Tap ‘Register’ on the top-right corner, then input a valid mobile number or email address and tap ‘Get Verification Code’.
   Enter verification code and set password, tap ‘Done’.
3. WiFi Pairing
   Step 1. Power the HBK-RW01 with a 12VDC power adapter.
   Step 2. Tap and hold WiFi icon on the HBK-RW01 for 5 seconds to enter pairing mode.Step 3. Tap ‘Add Device’ on the home page of Tuya app followed by tap ‘Add’ to enter Wi-Fi information.
   Step 4. Choose Wi-Fi and enter password.The Wi-Fi must be the same as the phone connecting, otherwise it will cause offline problem.
   The Tuya Smart only supports 2.4GHz Wi-Fi communication protocol and can’t support 5GHz.
   Step 5. The Tuya Smart app will search for nearby device and connected to the HBK-RW01.Step 6. Name the added device .

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

© 2022 HOBK Electronic Technology Co., Ltd
All rights reserved
>75% recycled paper

Documents / Resources

UHPPOTE HBK-RW01 Remote Control [pdf] User Manual HBK-RW01 Remote Control, HBK-RW01, Remote Control, Control

References

• User Manual