Seeed Studio is an innovative IoT technology company providing hardware, development boards, and smart sensing modules for makers, engineers, and developers.
Seeed Studio is a globally recognized IoT hardware enabler, specializing in edge computing, network communication, and smart sensing applications.
They provide a vast array of hardware solutions ranging from advanced mmWave radar modules for human presence and fall detection to compact, powerful microcontrollers like the popular XIAO series. Whether you are a maker or an engineer, Seeed Studio offers accessible, open-source hardware to accelerate your workflow and IoT development.
Selected manuals from manuals+ curated for this brand.
Featured manuals are a limited selection. Search for more manuals.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Datasheets and user manuals for Seeed Studio modules, such as mmWave and fall detection radars, can be found on this page or the official Seeed Studio Bazaar.
The XIAO series (like the RP2040 or ESP32-S3) can be programmed using the Arduino IDE or MicroPython. Ensure you have installed the appropriate board support package in your IDE.
According to the user manual, the radar requires a stable rated supply voltage of 4.9V to 6V and a current of 200mA or more for optimal operation.
Adjust the sensitivity parameters via the UART protocol and ensure the radar is mounted correctly, avoiding direct exposure to moving objects like fans, air conditioners, or pets.