Introduction
The XIAO ePaper Display Board EN04 is an electronic device designed for general use, development, and educational purposes. Powered by the XIAO nRF52840 Plus, this versatile board supports both 24-pin and 50-pin ePaper displays. It integrates a JST 2.0 mm battery connector with a power switch, a built-in charging IC, one reset button, and three user-programmable buttons. It is ideally suited for low-power ePaper projects such as digital signage, electronic labels, and portable information boards.
Safety Information
- Warning: Children need to use this product under adult supervision.
- Do not use in humid or high-temperature environments.
- Do not short circuit the power interface.
- Keep away from children.
- Do not disassemble the product without authorization.
- Use only appropriate power supply.
- Slight heating during operation is normal and not a cause for concern.
Package Contents
- XIAO ePaper Display Board EN04 × 1
- 24Pin Adapter and 24Pin FFC Extension Cable × 1
- 50Pin Adapter and 50Pin FFC Extension Cable × 1
Setup
1. Initial Inspection
Before use, please check the product for any visible damage or missing components against the package contents list.
2. Hardware Overview
Familiarize yourself with the board's components using the diagram below:
3. Connecting ePaper Displays
The EN04 board supports both 24-Pin and 50-Pin ePaper displays. Use the appropriate FFC cable and adapter provided. Ensure the display select jumper caps are correctly configured for your chosen display type.
- 24-Pin ePaper: Connect to the 24-Pin FPC connector.
- 50-Pin ePaper: Connect to the 50-Pin FPC connector.
4. Power Supply
The board can be powered via USB Type-C or a 3.7V Li-Battery connected to the JST 2.0mm battery connector. Use the integrated power switch for efficient power management.
- USB Type-C: For primary power and data connection.
- 3.7V Li-Battery: Connect to the JST 2.0mm connector for portable applications. Ensure the battery power ON/OFF switch is in the desired position.
Operating Instructions
Connect the board according to normal electronic operation procedures. For detailed technical information and programming guides, refer to the official website or product page.
1. User Buttons
The board includes one reset button and three user-programmable buttons (KEY1, KEY2, KEY3) for custom functions and project acceleration.
2. NFC Interface
The onboard NFC interface allows for tap-to-configure, pairing, or triggering content updates on compatible ePaper displays.
3. Software Platforms
The XIAO ePaper Display Board EN04 is compatible with various software development platforms, providing flexibility for your projects:
- Arduino
- Platform IO
- ESPHome
- And more...
4. Typical Applications
This board is well-suited for a range of low-power ePaper projects:
- Smart Name Badge: Create battery-powered ePaper name tags for events or offices, updated via NFC tap or wireless connection, with buttons to switch profiles or display QR codes.
- Dynamic Price Tags: Build low-power retail labels that show prices, stock levels, or promotions on different size ePaper, updated periodically without needing constant power.
- Meeting Room Signage: Use as status boards for meeting rooms, showing booking info, occupant name, or “Do Not Disturb” states, with buttons to quickly change modes.
- Portable Checklist Board: Make handheld task boards or packing lists that retain their content even when powered off.
Maintenance
Storage Conditions
- Store in a dry and ventilated place.
- Avoid direct sunlight and moisture.
Troubleshooting
Common Issues and Solutions
- Board not detected by PC: Ensure the USB Type-C cable is securely connected. Verify that the necessary drivers for the nRF52840 Plus are installed on your computer. Refer to the official documentation for driver installation guides.
- ePaper display not updating: Check all FFC cable connections to the ePaper display and the board. Ensure the display select jumper caps are correctly set for your specific ePaper display type.
- Power issues: If using battery power, ensure the battery is charged and the power switch is in the 'ON' position. If using USB, try a different USB port or cable.
- Unexpected behavior: Perform a reset using the dedicated reset button. Review your code and connections for any errors.
Specifications
| Parameter | Description |
|---|---|
| Processor | XIAO nRF52840 Plus |
| ePaper Connector | FPC 24 Pin 0.5mm, FPC 50 Pin 0.5mm |
| Battery Connector | JST 2.0mm |
| Switch | Battery Power ON/OFF |
| Power Supply | - 3.7V Li-Battery, - USB Type-C |
| Buttons | - 1x Reset button, - 3x User buttons |
| Compatible With | ePaper |
| Accessory Type | LCD Screen |
| Battery Included | No |
| Typical Application Fields | Internet of Things (IoT) |
User Tips
- Verify Microcontroller: Always double-check the product specifications to confirm the microcontroller used (e.g., nRF52840 Plus vs. ESP32 S3) to ensure compatibility with your development environment and project requirements.
- Driver Installation: If your PC doesn't detect the board correctly, ensure you have installed the latest drivers for the XIAO nRF52840 Plus. Consult the official Seeed Studio documentation for specific driver and setup instructions.
- Start with Examples: Begin with simple example code provided by Seeed Studio or the community for your chosen software platform (Arduino, Platform IO) to quickly get familiar with the board's functionalities.
Warranty and Support
Warranty Information
This product is covered by a limited warranty against manufacturing defects. Damage caused by misuse, modification, or improper operation is not covered under this warranty.
Support
For support, technical assistance, or further documentation, please contact the official Seeed Studio store or refer to the following resources:
- Official Website: Visit the Seeed Studio website for product pages, forums, and community support.
- Wiki Resources: Consult the Wiki-XIAO ePaper Display Board EN04 Resources for detailed guides and examples.
- User Manual (PDF): A comprehensive user manual is available in PDF format: Download PDF Manual.