Seeed Studio XIAO ESP32C6

Contents

Seeed Studio XIAO ESP32C6 User Manual

Compact and Powerful IoT Development Board

Introduction

The Seeed Studio XIAO ESP32C6 is a cost-effective Microcontroller Unit (MCU) based on Espressif’s ESP32-C6 SoC. This compact development board is designed for Matter-compliant smart home applications, offering versatile wireless connectivity including 2.4GHz Wi-Fi 6, Bluetooth 5.0, Zigbee, and Thread. Its thumb-sized footprint and single-sided mount make it ideal for space-constrained projects. The XIAO ESP32C6 integrates robust security features and supports seamless integration with major IoT Cloud platforms, facilitating streamlined development and rapid market entry for your IoT solutions.

Seeed Studio XIAO ESP32C6 front view

Figure 1: Front view of the Seeed Studio XIAO ESP32C6 development board.

Video 1: Product overview of the Seeed Studio XIAO ESP32C6.

Key Features

  • Outstanding RF Performance: Powered by the ESP32-C6 SoC, it offers robust WiFi/Bluetooth connectivity. An on-board antenna provides up to 80m BLE/Wi-Fi range, with an interface reserved for an external UFL antenna.
  • Enhanced Connectivity: Supports 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5 (LE), and IEEE 802.15.4 radio, enabling Thread and Zigbee protocols.
  • Matter Native: Designed for Matter-compliant smart home projects, ensuring interoperability.
  • Security Encrypted on Chip: Features secure boot, flash encryption, identity protection, and Trusted Execution Environment (TEE) for enhanced security.
  • Leveraging Power Consumption: Offers 4 working modes, with a deep sleep mode consuming as low as 15 μA, and supports lithium battery charge management.
  • Dual RISC-V Processors: Incorporates two 32-bit RISC-V processors; a high-performance processor up to 160 MHz and a low-power processor up to 20 MHz.
  • Classic XIAO Design: Maintains the compact 21 x 17.5mm thumb-size form factor and single-sided mount, ideal for small projects.
Graphic highlighting key features of XIAO ESP32C6

Figure 2: Key features and capabilities of the XIAO ESP32C6.

Specifications

Attribute Value
Model NumberSeeed Studio XIAO ESP32C6
Brand Nameseeed studio
Demo Board TypeRISC-V
ProcessorEspressif ESP32-C6 SoC, two 32-bit RISC-V processors (HP up to 160 MHz, LP up to 20 MHz)
On-chip Memory512KB SRAM & 4MB Flash
Wireless ConnectivityComplete 2.4GHz Wi-Fi 6 subsystem, Bluetooth 5.0, Bluetooth mesh, Zigbee, Thread IEEE 802.15.4
Interface1x UART, 1x LP_UART, 1x IIC, 1x LP_IIC, 1x SPI, 11x GPIO (PWM), 7x ADC, 1x SDIO
Working Temperature-40°C ~ 85°C
Dimensions (L x W x H)21 x 17.5 mm (Board), 10 x 7 x 2 cm (Package)
Weight0.1 kg (Package)
Battery IncludedNo
Typical Application FieldsEducation and Learning

Hardware Overview

The XIAO ESP32C6 features a compact layout with clearly labeled pins and components. Understanding the pinout is crucial for proper integration into your projects.

Detailed hardware overview and pinout diagram of the XIAO ESP32C6

Figure 3: Detailed pinout and component labels for the XIAO ESP32C6.

Key components include:

  • USB Type-C Port: For power supply and data communication.
  • Reset Button (R): Resets the board.
  • Boot Button (B): Used for entering bootloader mode.
  • Charge LED (PWR): Indicates power status.
  • User LED (USER): Programmable LED for user feedback.
  • UFL Antenna Connector: For connecting an external antenna (if needed).
  • Onboard Antenna: Integrated antenna for wireless communication.
  • GPIO Pins: General Purpose Input/Output pins for connecting peripherals.
  • 3V3 Pin: 3.3V power output.
  • GND Pins: Ground connections.
  • BAT Pins: For connecting a lithium battery.
Diagram illustrating the built-in antenna of XIAO ESP32C6

Figure 4: Illustration of the built-in antenna on the XIAO ESP32C6.

Setup Instructions

  1. Unpack the Board: Carefully remove the XIAO ESP32C6 board and any included accessories (e.g., pin headers) from its packaging.
  2. Attach Pin Headers (Optional): If your project requires breadboard compatibility or custom wiring, solder the provided 7-pin headers to the board's through-holes. Ensure correct orientation.
  3. Connect to Computer: Use a USB Type-C cable to connect the XIAO ESP32C6 to your computer. The board should power on, and the power LED (PWR) should illuminate.
  4. Install Drivers: Your operating system may automatically install necessary USB-to-serial drivers. If not, you may need to manually install drivers for the ESP32-C6 chipset. Refer to Espressif's official documentation for specific driver installation instructions.
  5. Prepare Development Environment: Install your preferred Integrated Development Environment (IDE), such as Arduino IDE or ESP-IDF. Configure the IDE to support ESP32-C6 boards.
  6. Upload First Program: Test your setup by uploading a simple program, such as a blinking LED sketch, to the board. This confirms successful communication and programming.
Seeed Studio XIAO ESP32C6 with included headers

Figure 5: XIAO ESP32C6 board with included pin headers, ready for soldering.

Operating Instructions

The XIAO ESP32C6 is designed for a wide range of IoT applications. Here are general guidelines for operation:

  • Power Supply: The board can be powered via the USB Type-C port (5V) or through the BAT pins for battery-powered applications. Ensure the power source matches the board's requirements.
  • Wireless Communication: Utilize the integrated Wi-Fi 6, Bluetooth 5.0, Zigbee, or Thread capabilities for network connectivity. Refer to the ESP-IDF or Arduino libraries for specific API calls and examples for each protocol.
  • GPIO Usage: Connect sensors, actuators, and other peripherals to the available GPIO pins. Configure pins as input or output, and use digital or analog functions as required by your project.
  • Low-Power Modes: For battery-operated devices, leverage the deep sleep and other low-power modes of the ESP32-C6 to extend battery life.
  • Cloud Integration: The board is compatible with platforms like ESP Rain Maker, AWS IoT, Microsoft Azure, and Google Cloud. Follow the respective platform's documentation for connecting and managing your device.
  • Matter Protocol: For smart home applications, develop using the Matter protocol to ensure interoperability with other Matter-certified devices.
Example application: Smart Home setup using XIAO ESP32C6

Figure 6: The XIAO ESP32C6 is ideal for secure and connected smart home applications.

Example application: Wearable device using XIAO ESP32C6

Figure 7: Its small size and low power consumption make it suitable for wearables.

User Tips

  • The XIAO ESP32C6 is a very versatile and capable board, allowing for a wide range of projects.
  • Users have found the quality of the ESPs to be good, working as intended.
  • The compact size and included headers make it convenient for prototyping on breadboards.
  • Consider using the provided cute, reusable packaging for storing the board and small components.
  • For initial testing, simple programs like blinking an LED or receiving data from a GPS module are good starting points.
  • The board's powerful capabilities allow for advanced projects, such as creating mmWave sensors.

Maintenance

To ensure the longevity and optimal performance of your XIAO ESP32C6, follow these maintenance guidelines:

  • Handle with Care: The board contains sensitive electronic components. Avoid dropping it or subjecting it to excessive force.
  • Keep Dry: Protect the board from moisture and liquids, which can cause short circuits and damage.
  • Clean Gently: If cleaning is necessary, use a soft, dry brush or compressed air to remove dust. Avoid using liquids or abrasive materials.
  • Storage: When not in use, store the board in an anti-static bag or its original packaging to protect it from electrostatic discharge and physical damage.
  • Temperature: Operate and store the board within its specified working temperature range (-40°C to 85°C).

Troubleshooting

If you encounter issues with your XIAO ESP32C6, consider the following troubleshooting steps:

  • Board Not Powering On:
    • Check the USB Type-C cable and port for proper connection.
    • Try a different USB cable or USB port on your computer.
    • Ensure your computer's USB port provides sufficient power.
  • Upload Errors:
    • Verify that the correct board and COM port are selected in your IDE.
    • Ensure necessary drivers are installed.
    • Try holding down the BOOT button while pressing and releasing the RESET button, then release BOOT to enter bootloader mode before uploading.
    • Check for syntax errors in your code.
  • Wireless Connectivity Issues:
    • Double-check Wi-Fi credentials (SSID, password).
    • Ensure the device is within range of the wireless network.
    • Verify that the correct wireless libraries are included and configured in your code.
    • Consider using an external UFL antenna if signal strength is consistently low.
  • Peripheral Not Responding:
    • Check all wiring connections to ensure they are secure and correct.
    • Verify that the GPIO pins are configured correctly (input/output, pull-up/down).
    • Ensure the peripheral is powered correctly.

Package Contents

  • Seeed Studio XIAO ESP32C6 Board x1
  • 7 Pin Header x2
Seeed Studio XIAO ESP32C6 in its protective packaging

Figure 8: The XIAO ESP32C6 board typically comes in a small, protective container.

Warranty and Support

For detailed technical documentation, tutorials, and community support, please refer to the official Seeed Studio resources. You can find comprehensive guides, including pin multiplexing and getting started instructions, on their wiki.

For further assistance or to view additional documentation, please visit the official Seeed Studio website or refer to the User Manual (PDF) provided by the manufacturer.

© 2024 Seeed Studio. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.