Flysky is a leading manufacturer of radio control systems, including 2.4GHz transmitters and receivers for RC cars, boats, and aircraft, known for their AFHDS technology.
Shenzhen Flysky Technology Co., Ltd., commonly known as Flysky, is a prominent manufacturer specializing in radio control (RC) technology since 2006. Based in Shenzhen, China, the company develops and produces advanced 2.4GHz transmission systems, including the proprietary Automatic Frequency Hopping Digital System (AFHDS). Flysky provides a comprehensive range of affordable and reliable transmitters, receivers, and telemetry sensors catering to hobbyists involved with RC cars, boats, fixed-wing aircraft, and drones.
Flysky products are widely recognized for their balance of performance and accessibility, featuring ergonomic designs and extensive programmability. Popular models include the FS-i6 series for air transmitters and the FS-GT5 for surface vehicles. The company emphasizes innovation through its dedicated research and development teams, ensuring stable signal transmission and robust safety features like failsafe protections and two-way communication protocols.
Selected manuals from manuals+ curated for this brand.
Additional documents are a limited selection. Search all manuals.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
To bind, put your transmitter into 'Bind Mode' via the menu or bind key. Then, power on the receiver while holding its bind button or using the bind plug. The receiver LED should stop flashing and remain solid when binding is successful.
Navigate to the System Setup menu on your transmitter (e.g., RX Setup > Failsafe). Select the channel you wish to protect (usually throttle), set the desired value (e.g., -100%), and turn the function ON to ensure the model stops if signal is lost.
A slowly flashing LED on the receiver typically indicates that it is waiting for a connection or is in binding mode but has not yet paired with the transmitter. Ensure your transmitter is on and within range.
Official firmware updates can be downloaded from the Flysky website (www.flysky-cn.com) under the downloads or support section for your specific model.