FlySky FS-i6S

Contents

FLYSKY FS-i6S 2.4G 10CH AFHDS 2A Digital Proportional Radio Control System User Manual

Model: FS-i6S

1. Introduction

The FLYSKY FS-i6S is a 2.4G 10-channel digital proportional radio control system designed for various remote-controlled models, including quadcopters, fixed-wing aircraft, multicopters, helicopters, RC cars, and boats. It utilizes the advanced AFHDS 2A (Automatic Frequency Hopping Digital System Second Generation) technology for reliable and interference-free communication. This manual provides essential information for the safe and effective use of your FS-i6S transmitter and compatible receivers (FS-iA6B and FS-iA10B).

FLYSKY FS-i6S Transmitter and Packaging
Figure 1: FLYSKY FS-i6S Transmitter and Packaging

2. Safety Information

  • Always ensure all switches are in their "up" (neutral/off) position before powering on the transmitter to prevent unintended model activation.
  • Operate your RC model in open areas, away from people, vehicles, and obstacles.
  • Do not operate the system in adverse weather conditions (rain, strong winds, lightning).
  • Regularly check battery levels of both transmitter and receiver before each use.
  • Keep the transmitter and receiver away from moisture and extreme temperatures.
  • This product is not a toy and should be operated by individuals aged 14 years or older with appropriate supervision.
FS-i6S Transmitter Initial Warning Screen
Figure 2: Initial warning on the FS-i6S LCD screen to ensure switches are in the up position.

3. Package Contents

Depending on the purchased variant, your package may include:

  • FLYSKY FS-i6S Transmitter (White or Black)
  • FLYSKY FS-iA6B 6-Channel Receiver (Optional)
  • FLYSKY FS-iA10B 10-Channel Receiver (Optional)
  • User Manual (Quick Start Guide)
  • Binding Plug (if applicable)
Various RC parts and FS-i6S manual
Figure 3: Example of package contents including the FS-i6S manual and various RC components.

4. Product Overview

4.1 FS-i6S Transmitter

The FS-i6S transmitter features a sleek design with dual antennas for enhanced signal reliability. It includes two joysticks, multiple switches, and an LCD screen for displaying telemetry data and settings. The M2 variant indicates a left-hand throttle configuration.

FS-i6S Transmitter Multi-Angle Views
Figure 4: Multi-angle views of the FS-i6S transmitter, highlighting its controls and design.

4.2 FS-iA6B Receiver

The FS-iA6B is a 6-channel receiver compatible with the FS-i6S transmitter, suitable for fixed-wing, multicopter, and helicopter models. It operates on the AFHDS 2A system and includes an i-BUS port.

FLYSKY FS-iA6B Receiver
Figure 5: The FS-iA6B 6-channel receiver shown with the FS-i6S transmitter.

4.3 FS-iA10B Receiver

The FS-iA10B is a 10-channel receiver, also compatible with the FS-i6S, offering more channels for complex models like airplanes, gliders, and helicopters. It features dual antennas, an i-BUS interface, and data acquisition capabilities.

FLYSKY FS-iA10B Receiver
Figure 6: The FS-iA10B 10-channel receiver.

5. Setup

5.1 Battery Installation (Transmitter)

The FS-i6S transmitter requires 4 x 1.5V AA batteries (not included).

  1. Locate the battery compartment on the back of the transmitter.
  2. Slide the battery cover open.
  3. Insert four AA batteries, ensuring correct polarity (+/-).
  4. Close the battery cover securely.
FS-i6S Transmitter Battery Compartment
Figure 7: Rear view of the FS-i6S transmitter with the battery compartment open.

5.2 Binding the Receiver

To establish communication between the transmitter and receiver, a binding process is required. Refer to the specific receiver manual for detailed binding instructions, as the process may vary slightly. Generally, it involves:

  1. Ensure both transmitter and receiver are powered off.
  2. Connect a binding plug to the B/VCC port on the receiver.
  3. Power on the receiver (e.g., connect to an ESC or external power source). The receiver's LED should flash rapidly.
  4. While holding the BIND button on the transmitter (if available, or follow specific menu instructions), power on the transmitter.
  5. The receiver's LED should turn solid, indicating successful binding.
  6. Power off both the transmitter and receiver, then remove the binding plug from the receiver.
  7. Power on the transmitter first, then the receiver, to confirm the connection.

5.3 Receiver Connection

Connect your servos, ESCs, and other components to the appropriate channels on the receiver. The FS-iA6B has 6 channels, while the FS-iA10B has 10 channels. Ensure correct polarity for all connections.

6. Operation

6.1 Powering On/Off

  • Power On: Ensure all switches are in their neutral/up position. Press and hold the power button until the LCD screen illuminates.
  • Power Off: Press and hold the power button until the screen turns off.

6.2 Basic Controls

The FS-i6S features two main joysticks and several auxiliary switches and potentiometers.

  • Joysticks: Control primary functions like throttle, rudder, aileron, and elevator. The M2 version has a left-hand throttle, meaning the left stick controls throttle and rudder, while the right stick controls aileron and elevator. Both joysticks are typically self-centering for precise control, especially useful for RC cars and multirotor drones.
  • Switches: Used for activating different flight modes, gear, flaps, or other auxiliary functions.
  • LCD Screen: Displays real-time information such as transmitter and receiver battery voltage, flight mode, and channel outputs.
FS-i6S Transmitter Main Display Screen
Figure 8: The main display screen of the FS-i6S transmitter showing flight mode and battery status.

6.3 Low Voltage Warning

The transmitter will issue a low voltage warning when its battery level drops below 4.2V. Replace or recharge batteries immediately to avoid loss of control.

7. Maintenance

  • Keep the transmitter and receivers clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Store the system in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Remove batteries from the transmitter if it will not be used for an extended period to prevent leakage.
  • Regularly inspect all cables and connectors for signs of wear or damage.

8. Troubleshooting

  • No Power: Check battery installation and ensure batteries are charged.
  • No Control/Loss of Signal:
    • Ensure the transmitter and receiver are properly bound.
    • Check receiver power supply and connections.
    • Verify transmitter and receiver antennas are correctly positioned and undamaged.
    • Ensure you are within the operational range.
  • Unresponsive Joysticks/Switches: Check for physical obstructions or damage. Ensure all switches are in their initial "up" position upon startup.
  • Model Not Responding Correctly: Verify channel assignments and servo directions in the transmitter's settings.

9. Specifications

9.1 FS-i6S Transmitter

Feature Detail
Brand Name FlySky
Item Name FS-i6S transmitter
Model Type Quadcopter, Fixed-wing, Multicopter, Helicopter, RC Cars, Boats
Channel Resolution 4096 steps
Low Voltage Warning Less than 4.2V
Antenna Length 26 x 2mm (dual antenna)
Weight 410g
Battery 6V (4 x 1.5V AA, not included)
Size 179 x 81 x 161mm
Color Options Silver White, Black
Certificate CE, FCC
Throttle Configuration M2 (Left-hand throttle)

9.2 FS-iA6B Receiver

Feature Detail
Brand Flysky
Model FS-iA6B
Channels 6CH
Model Type Fixed-wing, multicopter, helicopter
RF Range 2.4055-2.475GHz
RF Receiver Sensitivity -105dBm
2.4GHz System AFHDS 2A
Modulation Type GFSK
Power 4.0-6.5V DC
i-BUS Port Yes
Size 47 x 27 x 15mm
Weight 20g

9.3 FS-iA10B Receiver

Feature Detail
Number of Channels 10
Suitable Models Airplane / glider / helicopter
Frequency Range 2.4-2.48 GHz
Frequency Hopping Points 160
Transmitting Power Not more than 20dBm
Receiver Sensitivity -105dBm
2.4G Modes Automatic frequency second generation digital system (AFHDS 2A)
Encoding GFSK
Antenna Length 26 mm * 2 (dual antenna)
Weight 19.3 g
Input Power 4.0-6.5 V DC
Dimensions 47 x 33.1 x 14.7 mm
Certification CE0678, FCC
i-BUS Interface Yes
Data Acquisition Interface Yes

10. User Tips

  • Self-Centering Sticks: Many users appreciate the self-centering joysticks, which are beneficial for precise control in RC cars and multirotor drones. This feature enhances usability and control precision.
  • Versatile Compatibility: The FS-i6S and its receivers are noted for working well with a variety of RC models, including complex setups like excavators, wheel loaders, and helicopters, supporting multiple servos effectively.
  • Check Packaging: While the product itself is generally well-regarded, some users have reported that the outer packaging might arrive damaged. Always inspect the contents upon arrival to ensure the product is intact.
  • Battery Choice: Consider using rechargeable batteries for the transmitter for convenience, as standard AA batteries are not included and can be a recurring cost.

11. Warranty and Support

For warranty information and technical support, please refer to the official FlySky website or contact your retailer. Keep your proof of purchase for any warranty claims.

12. Compliance

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.