1. Introduction
This manual provides essential information for the safe and effective use of your FLYSKY FS-R7V 7CH Gyro Receiver. Designed for hobby-grade radio control models, this receiver offers 7 channels with built-in gyroscope functionality and supports ANT protocol for compatible transmitters like the FS-G7P. Please read this manual thoroughly before installation and operation.
Recommended Age: 14+ years
2. Safety Guidelines
- Purpose: For use in hobby-grade Radio Control models.
- Power: Use only within the rated voltage specified for this component (3.5 ~ 9V/DC). Incorrect voltage will cause damage.
- Environment: Keep components dry and protected from physical impact.
- Signal: Maintain a clear line of sight between your transmitter and model to ensure reliable communication.
- Always handle electronic components with care to prevent electrostatic discharge.
3. Product Overview
The FS-R7V receiver is a compact unit featuring multiple ports for connecting to your model's components. It includes a single antenna for signal reception and an LED indicator for status.




4. Specifications
| Feature | Detail |
|---|---|
| Product Name | FS-R7V |
| Compatible Transmitters | FS-G7P (Adapts surface transmitters with ANT protocol) |
| Compatible Models | Cars or boats |
| PWM Channels | 7 |
| RF | 2.4GHz ISM |
| Maximum Power | <20dBm (e.i.r.p.) (EU) |
| Antenna | Single antenna |
| Distance | ≥ 300m (Ground distance without interference) |
| 2.4G Protocol | ANT |
| Resolution | 4096 |
| Data Output | PWM/PPM/i-BUS/S.BUS |
| Input Power | 3.5 ~ 9V/DC |
| Online Update | Yes |
| Temperature Range | -10℃ ~ +60℃ |
| Humidity Range | 20% ~ 95% |
| Waterproof Rating | PPX4 |
| Dimensions | 35.0mm x 23.3mm x 13.3mm |
| Weight | 8.0g |
| Material | Composite Material |
| Certifications | CE, FCC ID: 2A2UNR7P00 |
5. Installation
- Disconnect Power: Always disconnect all power to your model before beginning installation.
- Connect Wires: Connect the wires according to their function (e.g., Power, Ground, Signal) to the corresponding points on your receiver or power distribution system. Refer to the port diagram in the Product Overview section for correct pin assignments.
- Secure Component: Secure the receiver safely inside your model, ensuring it does not interfere with any moving parts. Proper placement helps maintain signal integrity and prevents physical damage.
- Verify Connections: Before applying power, double-check that all connections are correct and secure. Loose connections can lead to intermittent operation or damage.
6. Operation
Binding the Receiver
To establish communication between your FS-R7V receiver and a compatible transmitter (e.g., FS-G7P), follow the binding procedure outlined in your transmitter's manual. Typically, this involves:
- Ensure both the transmitter and receiver are powered off.
- Connect a bind plug to the BIND port on the receiver.
- Power on the receiver. The LED indicator should flash, indicating it's in binding mode.
- Put your transmitter into binding mode (refer to your transmitter's manual for specific steps).
- Once bound, the receiver's LED should become solid.
- Power off both the receiver and transmitter, then remove the bind plug from the receiver.
- Power on the transmitter first, then the receiver. The receiver should now be successfully bound and operational.
Gyroscope Functionality
The FS-R7V features a built-in gyroscope. After binding, ensure the gyroscope is correctly calibrated and functioning as expected. This may involve specific settings on your transmitter or initial setup procedures for your model. Test the gyroscope's response by gently moving your model and observing the corrective actions of the servos.
7. Maintenance
- Inspection: Periodically inspect the receiver for any signs of wear, damage, or loose connections.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to gently wipe the receiver. Avoid using solvents or harsh chemicals.
- Storage: Store the receiver in a cool, dry place, away from direct sunlight and extreme temperatures.
- Ensure the antenna is not kinked or damaged, as this can affect signal range.
8. Troubleshooting
- Receiver not powering on:
- Check power connections and ensure the input voltage is within the specified range (3.5 ~ 9V/DC).
- No signal/control after binding:
- Verify that the receiver is correctly bound to the transmitter. Ensure the transmitter is compatible (FS-G7P with ANT protocol). Check for clear line of sight and potential interference.
- Intermittent signal loss:
- Check antenna placement and ensure it is not obstructed or damaged. Avoid operating near large metal objects or other strong RF sources.
- Servos not responding correctly:
- Ensure servos are connected to the correct PWM channels. Check for proper calibration and settings on your transmitter.
9. User Tips
- Initial Check: Upon receiving your new FS-R7V receiver, it's a good practice to test its functionality, including binding and gyroscope operation, before full installation into your model.
- Compatibility: This receiver is designed to work with FLYSKY transmitters using the ANT protocol, such as the FS-G7P. Always confirm compatibility with your specific transmitter model.
- Secure Mounting: Ensure the receiver is securely mounted within your model to prevent vibrations or impacts from affecting its performance or causing damage.
10. Package Contents
The package typically includes:
- 1 x FS-R7V Receiver
Note: Package contents may vary slightly. Please check your product packaging for exact details.
11. Compliance
The seller confirms that this component is intended for integration into a final product that must comply with all applicable regulations in the target country.
This product is certified with CE and FCC ID: 2A2UNR7P00.
12. Additional Resources
For a detailed user manual in PDF format, please refer to the official documentation provided by the manufacturer. A PDF version of the item guide is available here.
13. Production Overview
The following video provides a glimpse into the production and quality control processes for similar products, highlighting the attention to detail and manufacturing standards.