Bluedio Faith 2 User Manual

Bluedio Headphone Faith 2

USER MANUAL

Bluedio Headphone Faith 2

Bluedio Headphone
Model: Faith 2

Welcome to your new Bluedio headphones
We appreciate your choice of Bluedlo headphones. Before use, please read this user manual carefully and keep for future reference.

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedio.com; Or to email us at [email protected]; Or to call us at 020-88062628-835.

Important Safety Information

  1. Don’t use the headphones at the high volume for any extended period to prevent hearing damage.
  2. DON’T use the headphones while driving or in any environment requiring your full attention. If necessary, use Bluedio communication headphones.
  3. Keep the headphones, accessories and packaging parts out of reach of children to prevent accidents and choking hazards.
  4. STOP using the headphones immediately if you feel sick while using the headphones.
  5. DON’T expose the headphones to either extremely high or low temperatures (ideal: 10°C to 35°C).
  6. The headphones have ANC (Active Noise Cancellation) function; please use it in safe environment, such as public transportation and noisy office, instead of the road to avoid accidents.
  7. Removal of the chargeable battery in the headphones shall be conducted only by a qualified professional. DON’T try to replace the battery on your own.
  8. If the headphones have incompatible issues with your laptop or desktop, please use the Included audio cable to connect; Or buy a CSR4.0 and above Bluetooth adapter.

In the Box

In the Box

Headphone Overview

Headphone Overview

Power on:
When the headset is off, press and hold the MF button until you hear “Power on”, and you will one the blue light blinks. Note: The ANC function must be turned off before turning on the headphone under Bluetooth mode.

Power off:
When the headset is on, press and hold the MF button until you hear “Power or. Pairing: When the headset is off, press and hold the MF button until you hear “Ready to pair”, and you will one the blue light stays on.

Answer/Reject phone calls:
Receiving an incoming call, press the MF button once to Answer; press once again to End; Press and hold for 2 seconds to refuse.

Switch phone calls:
Receiving Call 2 in Call 1, press and hold the MF button to hold on Call 1 and answer Call 2; press and hold again to switch back to Call 1; press once to end the call.

Radial the last number:
Press the MF button twice to redial the last number.

Music control
When playing music, press the MF button once to Pause/Play.

Music control

Bluetooth pairing:
Make the headset enter pairing mode (see instruction “Pairing”), and tum on the Bluetooth feature of your phone, select ‘Bluedio F”; you will hear “device connected” after successfully paired.
Note: If pairing is not successful within 2 minutes, please repeat above steps to pair again.

Volume- button
Press once to reduce the volume; press and hold to skip to the previous track.

Volume- button

Volume+ button
Press Once to increase the volume; Press and hold skip to next track.

Volume+ button

ANC switch
Push the ANC switch to turn on/off the ANC function; when it’s on, the green light will stay on.

Note:

  1. When connecting the audio cable, push the ANC switch, the ANC function will take effect after about 3 seconds.
  2. When the headphone is in low battery state or the voltage less than 3V, the ANC indicator will go out and the ANC function takes no effect. In this situation, the headphone must be charged.
  3. If you activate ANC function before turning on the headphone, the headphone will be switched to Line-in mode automatically, at which time the headphone can not be turned on.
ANC Switch

Language selection:
Turn on the headset first, then press the MF button and the Volume- button once simultaneously to select English/Chinese/ French/Spanish.

Language selection

Connect to two mobile phones via Bluetooth:

  1. Connect the headphones with phone 1, then turn off the headphones and the Bluetooth feature of phone 1.
  2. Turn on the headphones and make it enter pairing mode.
  3. Connect the headphones with phone 2.
  4. Turn on the Bluetooth feature of phone 1, select ‘Bluedio r in the Bluetooth list.

Line-In music playback:
Use the standard 3.5mm Type-C audio cable to connect the headphones with your mobile phone and computer.
Note: Turn off the headphone befor using this feature.

Line-out music playback:
Connect the headphones with your mobile phone via Bluetooth first, then use the 3.5mm Type-C audio cable to connect the headphones with other headphones.
Note: Turn off the ANC function before using this feature.

Charger and battery
Charging cable: please use the Included Type-C charging cable to charge the battery, or it may damage the headphones.
USB wall Charger: if using a USB wall charger, the output requires 5VDC, > 0.5A.

Charge the headphones
The built-in battery is rechargeable and non-detachable. Don’t try to replace the battery on your own. Turn off the headphones before charging.
Use the included Type-C charging cable to connect the headphones with a computer or wall charger. While charging, the red light stays on.
Allow 1.5 hours for a full charge. Once fully charged, the blue light will stay on.

Charge the Headphone

Specifications:

  • Bluetooth version: 4.2
  • Bluetooth operating range: up to 33 feet (free space)
  • Bluetooth transmission frequency: 2.4GHz to 2.48GHz
  • Bluetooth profiles: A2DP, AVRCP, HSP, HFP
  • Audio resolution: [email protected] • Drivers: c•57mm
  • Impedance: 160
  • Frequency response: 15Hz-25,000Hz
  • Sound Pressure Level (SPL): 116dB
  • Standby time: about 650 hours
  • Bluetooth musicltalk time: about 16 hours
  • Bluetooth music/talk time under ANC: about 16 hours
  • Pure ANC time: about 16 hours
  • Charging time: 1.5 hours for full charge
  • Operating temperature range: -10°C to 50°C only
  • Charging voltage/current: 5V/ s 500mA
  • Output power: 25mWi-25mW

Specifications are subject to change without notice.

Questions about your Manual? Post in the comments!

Bluedio T4S User Manual

Bluedio T4S Headphones

USER MANUAL

Bluedio T4S Headphones

Bluedio Headphones
Model: T4S

Welcome to your new Bluedio headphone
We appreciate your choice of Bluedio headphones. Before use, please read this user manual carefully and keep for future reference.

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome lo visit our official website: www.bluedio.com; Or to email us at
[email protected]; Or to call us at 020-86062626-835.

Important Safety Information

  • DON’T use the headphones ate high volume for any extended period to prevent hearing damage.
  • DON’T use the headphones while driving or In any environment requiring your full attention. 11 necessary, use Bluedio communication headphones.
  • Keep the headphones, accessories and packaging parts out of reach of children to prevent accidents and checking hazards.
  • STOP using the headphones Immediately If you feel sick while using the headphones.
  • DON’T expose the headphones to either extremely high or low temperatures (ideal: 10″C to 35″C).
  • The headphones have ANC (Active Noise cancellation) function; please use It In safe environment, such as public transportation and noisy office, Instead er the road to avoid accidents.
  • Removal of the chargeable battery in the headphones shall be conducted only by a qualified professional. DON’T try to replace the battery on your own.
  • If the headphones have incompatible issues with your laptop or desktop, please use the included audio cable to connect: Or buy a CSR4.0 and above Bluetooth adapter.

In the box

In the box

Headphone overview

Headphone overview

Power on:
When the headset Is ctr, press and hold the MF button until you hear “Power on•, and you will see the blue light blinks.

Power off:
When the headset Is on, press and held the MF button until you hear “Power off.

Pairing:
When the headset Is off, press and hold the MF button until you hear “Ready to pair”, and you will see the blue light stays on.

Answer/Reject phone calla:
Receiving an incoming call, press the MF button once to Answer; press once again to End; Press and hold for 2 seconds to refuse.

Switch phone calls:
Receiving Call 2 in Call 1. press and hold the MF button to hold on Call 1 and answer Csll 2; press and hold again to switch back to Call 1; press once to end the call.

Redial the last number:
Press the MF button twice to radial the lest number.

Paring

Bluetooth pairing:
Make the headset enter pairing mode (see Instruction “Pairing”). and tum on the Bluetooth feature of your phone, select ‘Bluedio T”; you will hear “device connected• after Successfully paired.

Note: If pairing is not successful within 2 minutes, please repeat above steps to pair again.

Music control
When playing music, press the Pause/Play button once to Pause; press once again to resume.

Music control

Volume- button
Press once to reduce the volume; press and hold to skip to the previous track.

Volume- button

Volume+ button
Press once to increase the volume; press and hold to skip to the next track.

Volume+ button

ANC Switch
Push the ANC switch to turn on/off the ANC function; when it’s on, the green light will stay on. The ANC function will take effect after about 5 seconds.

ANC Switch

Language selection:
Turn on the headset first, then press the MF button and the Volume- button once
simultaneously to select English/Chinese/ French/Spanish

Language selection

Connect to two mobile phones via Bluetooth:

  1. Connect the headphones with phone 1, then turn off the headphones and the Bluetooth f eature of phone 1.
  2. Turn on the headphones and make it enter pairing mode.
  3. Connect the headphones with phone 2.
  4. Turn on the Bluetooth feature of phone 1, select “Bluedio T• in the Bluetooth list.

Line-in music playback:
Use the standard 3.5mm Type-C audio cable to connect the headphones with your mobile phone and computer.
Note : Turn off the headphone before using this feature.

Line-out music playback
Connect the headphones with your mobile phone vie Bluetooth first, then use the 3.5mm Type-C audio cable to connect the headphones with other headphones.

Note: Tum off the ANG function before using this feature.

Charger and battery
Charging cable: please use the included Type-C charging cable to charge the battery, or It may damage the headphones. USB wall Charger: If using a USB wall charger, the output requires SVDC > 0.5A.

Charge the headphones
The built-in battery is rechargeable and non-data enable. Don’t try to replace the battery on your own.
Turn off the headphones before charging. Use the Included Type-C charging cable to connect the headphones with a computer or wall charger. While charging, the red light stays on.
Allow 1 .5 hours for a full charge. Once fully charged, the blue light will stay on.

Specifications:

  • Bluetooth version: 4.2
  • Bluetooth operating range: up to 33 feet (free space)
  • Bluetooth transmission frequency: 2.4GHz lo 2A8GHz
  • Bluetooth profiles: A2DP, AVRCP, HSP, HFP
  • Audio resolution: [email protected]
  • Driver : Cl>57mm
  • Impedance: 160
  • Frequency response: 15Hz-25,000Hz
  • Sound Pressure Level (SPL): 116dB
  • Standby time: about 650 hours
  • Bluetooth music/talk time: about 16 hours
  • Bluetooth music/talk time under ANC: about 16 hours
  • Pure ANC time: about 16 hours
  • Charging time: 1.5 hours for full charge
  • Operating temperature range: -1 C”C lo 60″C only
  • Charging voltage/current 5V/ > 500mA
  • Output power: 25mW+2SmW

Specifications are to change without notice.

Questions about your Manual? Post in the comments!

Bluedio A2 User Manual

Bluedio A2 Headphones

USER MANUAL

Bluedio A2 Headphones

Bluedio Headphones
Model: A2

Welcome to your new Bluedio headphone
We appreciate your choice of Bluedio headphones. Before use, please read this user manual carefully and keep for future reference.

Purchases verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedio.com;
Or to email us [email protected];
Or to call us at 020-86062626-835.

Important Safety Information

  • DON’T use the headphones at a high volume for any extended period to prevent hearing damage.
  • DON’T use the headphones while driving or in any environment requiring your full attention. If necessary, use Bluedio communication headphones.
  • Keep Ole headphones, accessories and packaging parts out of reach of children to prevent accidents and choking hazards.
  • STOP using the headphones immediately if you feel sick while using the headphones.
  • DON’T expose Ole headphones to either extremely high or low temperatures (ideal: 1 O”C to 35″C).
  • Always keep the headphones dry and DON’T use the headphones near water.
  • Removal of Ole chargeable battery in Ole headphones shall be conducted only by a qualified professional. DON’T try to replace the battery on your own .

Headphone overview

Headphone overview

In the box

In the box

MF Button

  1. Power On: Press and hold the MF button until the blue light flashes quickly.
  2. Power Off: Press and hold Ole MF button until U,e blue light flashes quickly then goes out.
  3. Pairing: When the headphones are off, press and hold the MF button until you see Ole blue light stays on.
  4. When playing music, press the MF button once to Pause/Play;
  5. Receiving an incoming call, press the MF button once to Answer/End; Press and hold for 2 seconds to refuse;
  6. Receiving Call 2 in Call 1, press and hold the MF button to hold on Call 1 and answer Call 2; press and hold again to switch back to Call 1; press once to end the call;
  7. Press the MF button twice to redial the last number.
  8. When there comes a call, the headphones will automatically broadcast the phone number.
MF Button

Bluetooth pairing

  1. Make the headphones enter pairing mode (see instruction “MF button”), and turn on the Bluetooth feature of your phone, select “A• (enter “oooo” if necessary). After successfully paired, you will see the blue light blinks. Next time just turn on the headphones and the Bluetooth feature of your phone, it will automatically connect to your phone.
  2. Note: If pairing is not successful within 2 minutes, please repeat above steps to pair again.

Volume-/ previous Track
Press once to reduce the volume; press and hold to skip to the previous track.

Volume-

Volume+/next track
Press once to increase the volume; press and hold to skip to the next track.

Volume+

Language selection
Turn on the headphones first. then press the MF button and Volume- button together once, it will emit related prompt tone. There are 4 languages available, including Chinese, English, French and Spanish.

Language selection

Tum on/off the 3D sound
ON: Press the Volume+ button and Volume- button once together;
OFF: When the 30 sound is on, press the Volume+ button and Volume- button once together.

Tum on 3D Sound

Line-in music playback
Use the standard 3.5mm audio cable to connect the headphones with your mobile phone or computer.
Note: Tum off the headphones before using this feature.

Line-out music playback
When playing music via Bluetooth, use the 3.5mm audio cable to connect A with, other headphones .

Connect to two mobile phones via Bluetooth

  1. Connect A with phone 1, then turn off A and the Bluetooth feature of phone 1.
  2. Turn on A and make it enter pairing mode.
  3. Connect A with phone 2.
  4. Turn on the Bluetooth feature of phone 1, select “A” in the Bluetooth list.
Connect to two mobile phones via Bluetooth

Charger and battery

  1. Charging cable: please use the included USB charging cable to charge the battery, or it may damage the headphones.
  2. USB wall Charger: if using a USB wall charger, the output requires 5VDC, > 0.4A.

Charge The Headphone

The built-in battery is rechargeable and nondetachable. Don’t try to replace the battery on your own.

  1. Turn off the headphones before charging.
  2. Use the included USB charging cable to connect the headphones with a computer or wall charger. While charging, the red light stays on.
  3. Allow 2 hours for a full charge. Once fully charged, the blue light will stay on.
Charge The Headphone

Specification

  • Bluetooth version: 4.2
  • Bluetooth transmission frequency: 2.4GHz to 2.48GHz
  • Bluetooth operating range: up to 33 feet (free space)
  • Bluetooth profiles: A2DP, AVRCP, HSP, HFP
  • Frequency response: 20Hz-20,000Hz
  • Audio resolution: [email protected]
  • Drivers: <1>57mm
  • Impedance: 160
  • Total Harmonic Distortion (THD): 0.3%-3%
  • Sound Pressure Level (SPL): 118dB
  • Standby time: about 1300 hours
  • Bluetooth music/talk time: about 33 hours
  • Charging time: 2 hours for full charge
  • Operating temperature range: -10″C to 50″C only
  • Charging voltage/current: 5V/ >400mA
  • Output power: 25mW+25mW

Specifications are subject to change without notice.

Questions about your Manual? Post in the comments!

Bluedio US User Manual

Bluedio US User Manual

USER MANUAL

Bluedio US

Bluedio Speaker
Model: US

Welcome to your new Bluedio speaker
We appreciate your choice of Bluedio speaker. Before use, please read this user manual carefully and keep for future reference.

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedio.com;
Or to email us at [email protected];
Or to call us at 020-86062626-835.

Important Safety Information :

  • DON’T use the speaker at a high volume for any extended period to prevent hearing damage.
  • DON’T use the speaker while driving or in any environment requiring your full attention. If necessary, use Bluedio communication headphones.
  • Keep the speaker, accessories and packaging parts out of reach of children to prevent accidents and choking hazards.
  • STOP using the speaker immediately if you feel sick while using the speaker.
  • DON’T expose the speaker to either extremely high or low temperatures (ideal: 10’C to 35°C).
  • Removal of the chargeable battery in the speaker shall be conducted only by a qualified professional. DON’T try to replace the battery on your own.
  • If the speaker has incompatible issues with your laptop or desktop, please use the included audio cable to connect; or buy a CSR4.0 and above Bluetooth adapter.

Speaker overview :

Speaker overview

In the box

In the box

MF Button

  • Turn on: When the speaker is off, press and hold the MF button until you hear “Power on”, then the speaker is on and in pairing mode;
  • Turn off: When the speaker is on, press and hold the MF button until you hear Power off”;
  • When playing music in Bluetooth mode, press the MF button once to Pause/Play;
  • Receiving an incoming call, press the MF button once to Answer/End; Press and hold for 2 seconds to refuse;
  • Press the MF button twice to redial the last number.
MF button

Bluetooth Paring

Make the speaker enter pairing mode (see instruction “MF button”), and turn on the Bluetooth feature of your phone, select ·us” to connect. Next time just turn on the speaker and the Bluetooth feature of your phone, it will automatically connect to your phone.
Note: If pairing is not successful within 3 minutes, please repeat above steps to pair again.

Volume- button
Press once to reduce the volume; press and hold to skip to the next track.

Volume- button

Volume + button
Press once to increase the volume; press and hold to skip to the previous track.

Volume + button

3D button
Press once to tum on the 3D sound; press and hold for 2 seconds to tum off.

3D button

Line-in music playback
Use the standard 3.5mm audio cable to connect the speaker with your mobile phone or computer.
Note: Turn on the speaker before using this feature.

Line-in music

Carry belt
How to use the carry belt :
1. Flat and unfold the carry belt, then put the speaker on it;
2. Roll up the thicker belt around the middle sound drum, then fasten the clasp;
3. Roll up the left and right thinner belt respectively around the speakers metal shell, then fasten the clasp.

Carry belt

How to fasten the clasp :
Make the belt end without clasp pass through the second hole from the bottom of the clasp, then fold back through the first hole and tighten it.

How to fasten the clasp

Charge the battery
Connect the speaker to a power source with the included USB charging cable. While charging, the red light stays on. After fully charged, the blue light will stay on.

Specifications :

  • Bluetooth version: 4.1
  • Bluetooth transmission frequency: 2.4GHz to 2.48GHz
  • Bluetooth profiles: A2DP, AVRCP, HSP, HFP
  • Frequency response: 50Hz-20,000Hz
  • Audio input: VRM$:S:1V
  • Bluetooth operating range: up to 33 feet (free space)
  • Standby time: about 1000 hours
  • Bluetooth music/talk time: about 5 hours
  • Charging time: about 4-5 hours
  • Operating temperature range: -1 0’C to 50’C only
  • Audio output power: 2*2.5W+5W (right and left sound tracks+ bass)

Specifications are subject to change without notice.

Questions about your Manual? Post in the comments!

Bluedio UFO PLUS User Manual

Bluedio UFO PLUS

USER MANUAL

Bluedio UFO PLUS

Bluedio Headphone
Model: UFO PLUS

Welcome to use this manual
Thanks very much for your great support to this headset.

To verify the headset
Scrape the anti-fake label on the package for verification code; Visit our website: www.bluedio.com; Enter the verification code to verify the headset

For information and help
Welcome to visit our website: www.bluediocom; Or to email as at [email protected]; Or to call us at 020-86062626-835.

Read this user manual carefully and completely before using the headset.

  • DON’T use the headphones at a high volume for any extended period to prevent hearing damage.
  • DON’T use the headphones while driving or in any environment requiring your full attention.
  • Keep the headphones, accessories and packaging parts out of reach of children to prevent accidents and choking hazards.
  • Always keep the headphones dry and DON’T use the headphones near water.
  • STOP using the headphones immediately if you feel sick while using the headphones.
  • DON’T expose the headphones to either extremely high or low temperatures(ideal: 10°C to 35°C ).
  • Removal of the chargeable battery in the headphones shall be conducted only by a qualified professional. DON’T try to replace the battery on your own.
  • If the headphones have incompatible issues with your laptop or desktop, please use the included audio cable to connect; or buy a CSR4.0 and above Bluetooth adapter.

In the Box

In the Box

Headset Overview

Headset Overview

MF button:

  • When the headset is off, press and hold the MF button until you hear “Power On, Pairing”, the headset is on and in pairing mode, and the blue light will stay on.
  • When the headphones are on, press and hold the MF button until you hear “Power off’.
  • When playing music, press the MF button once to Pause/Play.
  • When receiving a call, press the MF button once to answer/end; press and hold for 2s to reject.
  • Receiving call 2 when In call 1, press and hold the MF button to keep call 1 and answer call 2; press and hold the MF button to switch back to call 1; press once to end.
  • Press the MF button twice to redial the last number.
MF button

Volume+ button:
Press Volume+ button once to turn up the volume.

Volume+ button

Volume- button:
Press Volume- button once to turn down the volume.

Volume- button

Previous track/EQ conversion:
Press once to skip back to the previous track; press and hold to turn off the EQ effect.

Previous track

Next track/EQ conversion:
Press once to skip forward to the nerd track; press and hold to turn on the EQ effect.

Next track

Bluetooth pairing:

Turn on the headset; twill enter pairing mode automatically; turn on the Bluetooth feature on your phone; select “UPlus”; once successfully paired, you will hear ‘Connected”.

Note: If the pairing is not successful within 3 minutes, please repeat above steps to try pairing again. If the headset has successfully connected to your phone, simply turn on the headset and Bluetooth feature of your phone to reestablish the Bluetooth connection.

Connecting to 2 mobile phones:

  1. Connect UPlus with phone 1, then turn off UPlus and The Bluetooth feature of phone 1.
  2. Turn on UPlus and make it enter pairing mode.
  3. Connect UPlus with phone 2.
  4. Turn on the Bluetooth feature of phone 1; select “UPlus” to conned.
Connecting to 2 mobile phones

Line-in music playback:
Connect the headset to your mobile phone or computer via the standard 3.5mm audio cable.
Note: Turn off the headset before using this feature.

Clear the pairing memory:
Make the headset enter pairing mode, then press the Volume+ and Volume- buttons together.

Clear the pairing memory

Specifications:

  • Bluetooth version: V4.1
  • Bluetooth operating range: up to 10m (free space)
  • Bluetooth transmission frequency: 2.4GHz-2.48GHz
  • Bluetooth profiles: A2DP, AVRCP, HSP, HFP
  • Drivers: 50mm x 2; (3Ornm x 2; (2Omm x 8)
  • Impedance: 420 ( 50mm), 320 ( 30mm), 320 ( 20mm)
  • Frequency response: 10Hz-22KHz
  • Sound pressure level(SPL) : 112dB
  • Bluetooth music/talk time: about 25 hours
  • Standby time: about 1000 hours
  • Fully charged time: about 2.5 hours
  • Charging voltage: 5V
  • current: 9500mA
  • Power Consumption: 109mw

Questions about your Manual? Post in the comments!

Bluedio V barrel User Manual

Bluedio V barrel Speaker

USER MANUAL

Bluedio V barrel

Bluedio Speaker
Model: V barrel

Welcome to your new Bluedio speaker
We appreciate your choice of Bluedio speaker. Before use, please read this user manual carefully and keep for future reference.

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedio.com;
Or to email us at [email protected];
Or to call us at 020-86062626-835.

Important Safety Information :

  • DON’T use the speaker at a high volume for any extended period to prevent hearing damage.
  • DON’T use the speaker while driving or in any environment requiring your full attention. If necessary, use Bluedio communication headphones.
  • Keep the speaker, accessories and packaging parts out of reach of children to prevent accidents and choking hazards.
  • STOP using the speaker immediately if you feel sick while using the speaker.
  • DON’T expose the speaker to either extremely high or low temperatures (ideal: 10’C to 35°C}.
  • Removal of the chargeable battery in the speaker shall be conducted only by a qualified professional. DON’T try to replace the battery on your own.
  • If the speaker has incompatible issues with your laptop or desktop, please use the included audio cable to connect; or buy a CSR4.0 and above Bluetooth adapter.

Speaker overview :

Speaker overview

In the box

In the box

MF button

  • Turn on: When the speaker is off, press and hold the MF button until you hear “Power on”, then the speaker is on and in pairing mode;
  • Turnoff: When the speaker is on, press and hold the MF button until you hear “Power off;
  • When playing music in Bluetooth mode, press the MF button once to Pause/Play;
  • Receiving an incoming call, press the MF button once to Answer/End; Press and hold for 2 seconds to refuse;
  • Press the MF button twice to redial the last number.
MF button

Bluetooth pairing
Make the speaker enter pairing mode (see instruction “MF button”), and turn on the Bluetooth feature of your phone, select “Bluedio V” to connect. Next time just turn on the speaker and the Bluetooth feature of your phone, it will automatically connect to your phone.
Note: If pairing is not successful within 3 minutes, please repeat above steps to pair again.

Volume- button
Press once to reduce the volume; press and hold to skip to the next track.

Volume- button

Volume + button
Press once to increase the volume; press and hold to skip to the previous track.

Volume + button

3D button
Press once to tum on the 3D sound; press and hold for 2 seconds to turn off.

3D button

Line-In music playback
Use the standard 3.5mm audio cable to connect the speaker with your mobile phone or computer.
Note: Turn on the speaker before using this feature.

Line-In music playback

Carry belt
How to use the carry belt :

  1. Flat and unfold the carry belt, then put the speaker on it;
  2. Roll up the thicker belt around the middle sound drum, then fasten the clasp:
  3. Roll up the left and right thinner belt respectively around the speaker’s metal shell, then fasten the clasp.
Carry belt

How to fasten the clasp :
Make the belt end without clasp pass through the second hole from the bottom of the clasp, then fold back through the first hole and tighten It.

How to fasten the clasp

Charge the battery
Connect the speaker to a power source with the included USB charging cable. While charging, the red light stays on. After fully charged, the blue light will stay on.

Specifications :

  • Bluetooth version: 4.1
  • Bluetooth transmission frequency: 2.4GHz to 2.48GHz
  • Bluetooth profiles: A2DP, AVRCP, HSP, HFP
  • Frequency response: S0Hz-20,000Hz
  • Audio input: VRMSS1V
  • Bluetooth operating range: up to 33 feet (free space)
  • Standby time: about 1000 hours
  • Bluetooth music/talk time: about 5-7 hours
  • Charging time: about 4-5 hours
  • Operating temperature range: -1 0″C to 50°C only
  • Audio output power: 2.5W”2+5W+0.5W”2 (Left and right channels+ bass+ treble)

Specifications are subject to change without notice.

Questions about your Manual? Post in the comments!

Bluedio Vinyl User Manual

Bluedio Vinyl Headphones

USER MANUAL

Bluedio Vinyl Headphones

Bluedio Headphones
Model: Vinyl

Welcome to your new Bluedio headphones
We appreciate your choice of Bluedio headphones. Before use, please read this user manual carefully and keep for future reference.

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official website: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to visit our official website: www.bluedio.com, Or to email us at [email protected]: Or to call us at 020-86062828-835.

Important Safety Information

  • DON’T use the headphones at a high volume for any extended period to prevent hearing damage.
  • DON’T use the headphones while driving or in any environment requiring your full attention. If necessary, use Bluedio communication headphones.
  • Keep the headphones, accessories and packaging parts out of reach of children to prevent accidents and choking hazards. • STOP using the headphones immediately if you feel sick while using the headphones.
  • DON’T expose the headphones to either extremely high or low temperatures (ideal: 10°C to 35.C).
  • Always keep the headphones dry and DON’T use the headphones near water.
  • Removal of the chargeable battery in the headphones shall be conducted only by a qualified professional. DON’T try to replace the battery on your own.
  • If the headphones have incompatible issues with your laptop or desktop, please use the included audio cable to connect; or buy a CSR4.0 and above Bluetooth adapter.

In the Box

In the Box

Headphones Overview

Headphones Overview

Slide switch:
Push the Slide Switch to turn on/off Vinyl, and it will emit “Power On”/”Power Off “.

Slide switch

MF button:

  • When playing music, press the MF button once to Pause/Play;
  • Receiving an incoming call, press the MF button once to Answer/End; Press and hold for 2 seconds to refuse;
  • Receiving Call 2 in Call 1, press and hold the MF button to hold on Call 1 and answer Call 2; press and hold again to switch back to Call 1; press once to end the call;
  • Press the MF button twice to redial the last number.
MF button

Volume- button :
• Press once to reduce the volume; press and hold to skip to the previous track.

Volume- button

Volume+ button :
• Press once to increase the volume; press and hold to skip to the next track.

Volume+ button

Turn on/off the 3D sound
ON: press the MF button and Volume+ button once together;
OFF: press the MF button and Volume- button once together

Tuen On 3D
Tuen Off 3D

Bluetooth pairing :
Push the Slide Switch to turn on Vinyl, and turn on the Bluetooth feature of your phone; select “VINYL”; you will hear “Connected” after successfully paired.

Note: If pairing is not successful within 3 minutes, please repeat above steps to pair again.

Connect to two mobile phones via Bluetooth :

  1. Connect Vinyl with phone 1, then turn off Vinyl and the Bluetooth feature of phone 1.
  2. Turn on Vinyl and connect it with phone 2.
  3. Turn on the Bluetooth feature of phone 1, select °VINYL” in the Bluetooth list.
Connect to two mobile phones via Bluetooth

Line-in music playback :
Use the standard 3.5mm audio cable to connect the headphones with your mobile phone and computer.
Note: Turn off the headphones before using this feature.

Line-out music playback :
When playing music via Bluetooth, use the 3.5mm audio cable to connect Vinyl with other headphones or speakers.

music playback

Clear the pairing memory :
Turn on Vinyl, when you hear “Pairing”, press the Volume + and Volume – buttons once together.

Clear the pairing memory

Specifications :

  • Bluetooth version: 4.1
  • Bluetooth operating range: up to 33 feet (free space)
  • Bluetooth transmission frequency: 2.4GH. to 2.48GHz
  • Bluetooth profiles: A2DP, AVRCP,HSP, HFP
  • Audio resolution: [email protected]
  • Drivers: (I)57mm • Impedance: 160
  • Frequency response: l5Hz-25,000Hz
  • Sound Pressure Level (SPL): 116dB
  • Total Harmonic Distortion (THD): <0.1%
  • Standby time: about 1100 hours
  • Bluetooth music/talk time: about 20 hours
  • Charging time: 2 hours for full charge
  • Operating temperature range: -10°C to 50°C only
  • Charging voltage: 5V
  • Current: s500mA
  • Power consumption: 137mw

Questions about your Manual? Post in the comments!

Bluedio Vinyl Plus User Manual

Bluedio Vinyl Plus Headphones

USER MANUALS

Bluedio Vinyl Plus  Headphones

Bluedio Headphones
Model: Vinyl Plus

Welcome to your new Bluedio headphones
We appreciate your choice of Bluedio headphones. Before use, please read this user manual carefully and keep for future reference.

Purchase verification
You can find the verification code by scraping the coating off the security label that is affixed to the original packaging. Enter the code on our official webslte: www.bluedio.com for purchase verification.

Learn more and get support
Welcome to vise our official website: www.bluedio.com; Or to email us at aftersales©gdliwei.com; Or to call us at 020-86062826.

Please read this user manual carefully and keep for future reference.

Important Safety Information

  • DON’T use the headphones at a high volume for any extended period to prevent hearing damage.
  • DON’T use the headphones while driving or in any environment requiring your full attention.
  • Keep the headphones, accessories and packaging parts out of reach of children to prevent accidents and choking hazards.
  • Always keep the headphones dry and DON’T use the headphones near water.
  • STOP using the headphones immediately if you feel sick while using the headphones.
  • DON’T expose the headphones to either extremely high or low temperatures(ideal: 10T to 35T ).
  • Removal of the chargeable battery in the headphones shall be conducted only by a qualified professional.
  • DON’T try to replace the battery on your own.

Charging the battery
The battery needs to be charged when you hear “Please charge” or you see the red light blinks.

  1. Turn off the headphones before charging.
  2. Plug the small end of the included charging cable into the charging connector on the headphones. Plug the large end into a USB wall charger or computer that is powered on . When charging, the red light stays on.
  3. Allow 2 hours for a full charge. When fully charged, the blue light stays on.

Note:

  1. The headphones will not play while charging.
  2. USB wall charger requires output: 5VDC, 0.5A.
Charging the battery

Entering pairing mode
When the headphones are off (If not, turn off the headphones first), press and hold the MF Button until you hear “Pairing” or you see the blue light stays on (instead of blinking).

Paring

  1. Move the headphones close to your mobile phone. The closer, the better.
  2. Make sure the headphones have entered pairing mode. (See instruction °Entering pairing mode”)
  3. Go to your phone’s Bluetooth settings, add or search devices. (Make sure the Bluetooth feature is turned on)
  4. Select “Vinyl Plus° from your device fist (If asked for a password or PIN code, enter “0000”)
  5. When you hear “Connected”, the headphones and your phone are successfully paired and connected.

Note: If pairing is not successful within 60 seconds, the blue light blinks and the headphones are out of pairing mode. Please turn off the headphones and try pairing again.

Paring

Turning the headphones on/Off
ON: Press and hold the MF Button until you hear “Power on or you see the red and blue light comes on.
OFF: Press and hold the MF Button until you hear “Power off or you see the red and blue light comes on.

Headphones Overview

Headphones Overview

In The Box

In The Box

Connecting to 2 Mobile phones:

  1. Move the headphones close to 2 mobile phones. The closer, the better.
  2. Make sure the headphones have entered pairing mode. (See instruction “Entering pairing mode”)
  3. Go to the Bluetooth settings on phone 1, turn on the Bluetooth feature, add or search devices, select “Vinyl Plus” from the device list.
  4. Turn off the Bluetooth feature on phone 1, and turn off the headphones.
  5. Make sure the headphones have entered pairing mode. (See instruction “Entering pairing mode”)
  6. Go to the Bluetooth settings on phone 2, turn on the Bluetooth feature, add or search devices, select “Vinyl Plus” from the device list.
  7. Turn on the Bluetooth feature of phone 1, and the headphones will reconnect to phone 1 automatically. (If automatic reconnecting tails, please Unpair/Forget This Device on phone 1. Turn off the headphones and try pairing again)

Reconnecting the paired headphones to your phone

  1. Move the headphones close to your mobile phone. The closer, the better.
  2. Simply turn on the headphones, no additional operation needed. When you see the blue light blinks, the headphones are in reconnecting mode.
  3. Turn on the Bluetooth feature of your phone, and the headphones will reconnect to your phone automatically. When successfully reconnecting, you will hear “Connected”.

Note: If automatic reconnecting fails, please Unpair/Forget This Device on your phone. Turn off the headphones and try pairing again.

Disconnecting the headphones from your phone
Turn off the headphones or turn off the Bluetooth feature on your phone.

Note: In Bluetooth mode° means the headphones and your phone are connected via Bluetooth.

Using the head hones to talk (M Bluetooth mode)
When you hear a ringtone, there is an incoming call. To answer it: press the MF Button once.

To end a call
When you are on call, to end it: press the MF Button once.

To reject a call
When you hear a ringtone, there is an incoming call. To reject it: press and hold the MF Button for 2 seconds.

To Redial the last number
Press the MF Button twice, you will hear a beep and the redialing begins.

Voice dial (Must be supported by your noble phone)
Press and hold the MF Button until you hear a beep.

Call waiting (must be supported by yow mobile phone)
When you are on call 1, and you receive call 2:

  1. To and call 18, answer call 2: Press the MF Button once
  2. To answer call 2 and put call 1 on hold: Press and hold the MF Button until you hear a beep When you are on call 2, and call 1 is on hold:
  3. To switch back to call 1 and put call 2 on hold: Press and hold the MF Button until you hear a beep
  4. To switch back to call 1 8 and call 2: Press the MF Button once

Track / Volume control (In Bluetooth mode)
Pause/Play: Press the MF Button once
Skip Forward: Press and hold the Vol+ Button
Skip Back: Press and hold the Vol- Button
Volume Up: Press the Vol+ Button once
Volume Down: Press the Vol- Button once

Line-in music playback

  1. Plug the included audio cable into the jack on the headphones.
  2. Plug the Included audio cable Into the jack on your device.

Note: Make sure the headphones are turned off before using this feature.

Line-out music sharing

1.Connect the headphones to your phone via Bluetooth.
2.Connect the headphones to other wired headphones or amplifier.

Turning 3D sound on/off (In Bluetoolh mode)

ON: When the headphones are playing stereo music, press the MF Button and Vol+ Button together then release the buttons immediately. You will hear a tone and the 3D sound is on.

OFF: When the 3D sound is on, press the MF Button and Vol- Button together then release the buttons immediately. You will hear a tone and the 3D sound is olf.

Clearing the headphones memory

  1. Make sure the headphones have entered pairing mode. (See instruction “Entering pairing model )
  2. Press the Vol, Button and Vol- Button together then release the buttons immediately. All Bluetooth devices are cleared from the headphones.

Specifications

  • Bluetooth version: 4.1 +EDR
  • Bluetooth profiles: A2DP, AVRCP, HSP, HFP
  • Bluetooth transmission frequency: 2.4GHz to 2.48GHz
  • Bluetooth operating range: up to 33 feet (free space)
  • Drivers: 070mm
  • Impedance: 1611
  • Frequency response: 15Hz-25,000Hz
  • Total Harmonic Distortion (THD): 00.1%
  • Bluetooth music/talk time: up to 20 hours
  • Standby time: up to 1100 hours
  • Charging time: 2 hours for full charge
  • Operating temperature range: -10 °C to 50°C only

Specifications are subject to change without notice.

FAQ

  1. Headphones cannot be paired to your mobile phone.
    Solution: Check if the headphones have entered pairing mode. Check if your mobile phone supports the HS or HF profile. Check if the Bluetooth search function of your phone is tumed on. Check if your mobile phone is tumed off. Check if the distance between the headphones and your phone exceeds 10m.
  2. Headphones cannot be turned on.
    Solution:
    The battery runs low. Recharge the battery.
  3. Can the battery be replaced?
    Solution:
    Answer: The battery is non-detachable and cannot be replaced.
  4. Can the headphones be used while driving?
    Solution:
    Answer: DON’T use the headphones in an environment that requires your special attention.
  5. Bluetooth connection is suddenly Interrupted within 10 meter.
    Solution:
    Check if there is metal or other material interfering with the transmission.
  6. No audio signal
    Solution:
    Check if the headphones are turned off. Check if the headphones are paired. If necessary pair the headphones with the audio source again. Check the connection to your audio source. The volume is too low, turn up the volume.
  7. Can the headphones be used to control the APPs on your mobile phone.o control the APPs on your mobile phone.
    Solution:
    Software settings of APPs may be varied, thus some APPs may not be control light by the headphones.
  8. The headphones can’t be recharged.
    Solution:
    Check the connection of USB plugs. If necessary, remove the USB cable and plug again. Turn on the headphones then turn it off.

Questions about your Manual? Post in the comments!

Bluedio UFO User Manual

Bluedio UFO Headset

USER MANUAL

Bluedio Headphones

Bluedio Headset
Model: UFO

Welcome to use this manual
Thanks very much for your great support to this headset.

To verify the headset
Scrape the anti-fake label on the package for verification code; Visit our website: www.bluedio.com; Enter the verification code to verify the headset.

For Information and help
Welcome to visit our website: www.bluedio.com; Or to email us at [email protected]; Or to call us at 020-86062626-835.

Read this user manual carefully and completely before using the headset.

  1. Should adjust reasonable volume and time when using the headphone.
  2. Please stop using the headphone if there is any danger to ensure your safety.
  3. Be careful not to turn the volume so high that you can’t hear anything around you. If there is a tinnitus or the volume is too high, please reduce the volume.
  4. Please avoid using headphone to listen to music, make or receive calls to avoid distraction while driving.
  5. Put this product and its accessories somewhere out of the reach of children, to avoid inappropriate use by children which may cause a fatal danger.
  6. Should avoid water entering the headphone during grooming, which may cause damage to the sound quality or the headphone.
  7. Stop using the headphone if you feel obvious discomfort, irritation or have other adverse reactions.
  8. The headphone should not be stored or use at temperatures below -15°C. (5°F) or above 55°C (131°F) which may shorten headphone or battery life.

Charging and battery
Warning(to avoid damage to the headset)

  1. Charging cable: Only use charging cable of standard Micro-USB(5 PINS).
  2. Charger: If you use a charger for charging, its output DC voltage should be 5V-5.5V, and its output current should exceed 500mA.

Charge the headset
The built-in battery of the headset is rechargeable and non-detachable. Do not replace the battery.

  1. Power off the headset before charging.
  2. Connect the Micro-USB plug(the smaller plug) of the charging cable to the charging socket of the headset; Connect the other plug to the USB socket of your computer or other charging device. The LED remains red and the headset is being charged.
  3. When the headset is fully charged(takes about 3hrs), the LED remains blue.
Charge the Headset
Charge the Headset

In The Box

In the Box

Headset Overview

Headset Overview

Power On/Off
ON: Press and hold the MFB until the LED(red and blue) lights up, then release the MFB and the headset will issue “power on”.
OFF: Press and hold the MFB until the LED(red and blue) lights up, then release the MFB and the headset will issue “power off’.

Enter pairing mode
When the headset is off, press and hold the MFB until the LED remains blue, then release the MFB. The headset will issue “pairing”, and it is in pairing mode.

Pair the headset with your mobile phone

  1. Keep the distance between the headset and your mobile phone (or other device) within 1 meter. The closer, the better.
  2. Make sure the headset enters pairing mode.(See instruction “Enter pairing mode”)
  3. Switch on the Bluetooth of your mobile phone, add/search devices.
  4. When “U” appears, select it. (If asked for a pass code: Enter “0000”)
  5. When you see the LED flashing blue, the headset and your mobile phone is in Bluetooth connection.

Attention: If the pairing is not successful within 300 seconds, the blue LED will go out and the headset is out of pairing mode. Please repeat the pairing procedure to try again.

Pair the headset with your mobile phone

Connect to two mobile phones at the same time:

  1. Keep the distance between the headset and mobile phones within 1 meter. The closer, the better.
  2. Make sure the headset enters pairing mode.(See instruction “Enter pairing mode”)
  3. Switch on the Bluetooth of phone 1, add/search devices, select “LT, connect phone 1 to the headset.
  4. Switch off the Bluetooth of phone 1, and power off the headset.
  5. Make sure again the headset enters pairing mode.(See instruction “Enter pairing mode”)
  6. Switch on the Bluetooth of phone 2, add/search devices, select “U”, connect phone 2 to the headset.
  7. Switch on again the Bluetooth of phone 1, and the headset will connect to it automatically.(If automatic connection fails, please pair again phone 1 with the headset)
  8. The headset connects to two mobile phones at the same time.

Reconnect the paired headset to your mobile phone

  1. Keep the distance between the headset and your mobile phone within 1 meter. The closer, the better.
  2. Power on the headset, and it will enter reconnecting mode automatically with the LED flashing blue.
  3. Switch on the Bluetooth of your mobile phone, and the headset will automatically connect to your mobile phone. (If automatic connection fails, please pair again the headset with the phone)

Disconnect the headset with your mobile phone

  1. Power off the headset . 2. Or switch off the Bluetooth of your mobile phone.
  2. Or leave the headset 20m (60ft) away from your mobile phone or farther.

Use the headset to talk on the phone(in Bluetooth mode)
In Bluetooth mode, the headset and your mobile phone is in Bluetooth connection. (See instruction “Pair the headset with your mobile phone”)

Answer a call
When there is a call, the headset will issue a ring tone. Press the MFB once to answer it. Or use your mobile phone to answer it.

End a call
When you are on call, press the MFB once to end it. Or use your mobile phone to end it.

Reject a call
When there is a call, the headset will issue a ring tone. To reject it, press and hold the MFB for around 2 seconds, then release the MFB. Or use your mobile phone to reject It.

Redial last number
Press the MFB twice.

Call waiting (need your mobile phone to support)
When you are on call 1 , there comes call 2:

  1. To end call 1& answer call 2: press the MFB once
  2. To retain call 1 & answer call 2: press and hold the MFB for around 2 seconds, then release the MFB When you am on call 2, and call 1 is still retained:
  3. To switch to call 1 & retain call 2: press and hold the MFB for around 2 seconds, then release the MFB
  4. To switch to call 1 & end call 2: press the MFB once

Voice control (need your mobile phone to support)
Press and hold the MFB for around 2 seconds, then release the MFB.

Control track / Adjust Volume(in Bluetooth mode)
Pause /Resume track: press the MFB once
Skip to previous track: press the < Button once

Skip to next track: press the > Button once
Turn up the volume: press the + Button once
Turn down the volume: press the — Button once

3D sound effect on/off On Bluetooth mode)
ON: When the headset is playing stereo music, press and hold the > Button until you hear a beep, release the > Button. The 3D sound effect is on.
OFF: When the 3D sound effect is on, press and hold the < Button until you hear a beep, release the < Button. The 3D sound effect is off.

Line-In music
Connect one plug of the 03.5mm audio cable to the audio jack of the headset, and connect the other plug to the audio jack of your mobile phone.

control

Specifications:

  • Bluetooth version: V4.1
  • Supported profiles: A2DP, AVRCP, HSP, HFP
  • Transmission frequency range: 2.4GHz-2.48GHz
  • Bluetooth operating range : up to 10m (free space)
  • Audio DAC Resolution: up to [email protected]
  • Driver units: 050mm•2; 020mm•6 Nominal impedance: 320
  • Frequency response: 5Hz-25KHz
  • Total harmonic distortion(THD): 0.3%-3%
  • Sound pressure level(SPL) : 120dB
  • Bluetooth music time: up to 25hrs
  • Bluetooth talk time: up to 28hrs
  • Standby time: up to 1300hrs(about 50 days)
  • Fully charged time: about 3hrs
  • Operating environment: -10 to 50°C

Specifications are subject to change without notice.

FAQ

  1. Headphone cannot pair with mobile phone.
    Solution: Please check whether your headphone is in pairing mode or reconnection mode, check whether Bluetooth search function of your mobile phone has been opened. Thus, check your mobile device’s Bluetooth menu and delete/forget the headphone, reconnect the headphone following instructions of user manual.
  2. Headphone cannot be switch on.
    Solution: Please check the battery status of your headphone.
  3. Can I change battery for the headphone?
    Solution: No, this headphone use a built-in non-detachable Li-Polymer battery, it cannot be removed.
  4. Can I use headphone while driving?
    Solution: For safety reason, we strongly recommend not to use over-ear headphone to avoid distraction while driving.
  5. Headphone disconnect with your mobile phone within 10 meter.
    Solution: Please check if there is metal or other material within relatively close range may interfere Bluetooth connection, as Bluetooth is a radio technology that is sensitive to objects between the headphone and the connected device.
  6. Cannot hearing a sound from your computer or mobile phone.
    Solution: Please check whether the output channel of your computer is Bluetooth Audio Device and Bluetooth function of your computer support A2DP profile. And please check volume of your headphone, and computer/mobile phone.
  7. Cannot hearing a sound from source and audio streaming application.
    Solution: Check the source of streaming audio is on and playing. Or check that the device supports A2DP audio streaming. Or try other source / audio streaming app or try another track. Or check the Bluetooth device volume is at a high level and not muted. Or place the device to headphones (10 meters). Or take device and headphones away for any device that may cause interference, like other Bluetooth devices, cordless phones, microwave ovens or wireless computer network routers. Or reduce the number of applications running on the device. The audio quality will also be improved by turning off the Wi-Fi functionality of the device.
  8. Cannot use the headphone to control volume or select track of APP of your mobile phone.
    Solution: Software settings of APP may be varied led to some functions of the APP may not control by the headphone.
  9. Cannot charge the headphone.
    Solution: Make sure both ends of the USB cable are securely connected. If you use a power outlet, ensure that the power supply is connected securely and the outlet works. If you use a computer, make sure it is connected and the USB port is powered. Turn on the headphone and then turn them off. Disconnect and reconnect the USB charging cable.

Questions about your Manual? Post in the comments!

Bluedio A User Manual

Bluedio A Headphones

USER Manual

Bluedio  A Headphones

Bluedio Headphones
Model: A

Welcome to your new Bluedio headphones
We appreciate your choice of the Bluedio headphones.

To verify the headphones
Scrape the anti-fake label on the package for verification code; Visit our website: www.bluedio.com; Enter the verification code to verify the headphones.

Learn more and get support
Welcome to visit www.bluedio.corn; Or to email us at [email protected]; Or to call us at 020-86062626-835.

Please read this user manual carefully and keep for future reference.

Important Safety Information

  • DON’T use the headphones at a high volume for any extended period. To avoid hearing damage, make sure to use your headphones at a comfortable, moderate volume level.
  • DON’T use the headphones during any activity requiring your full attention, e.g., while driving, riding a bike or crossing streets.
  • Keep the headphones, accessories and packaging parts out of reach of children to prevent accidents and choking hazards.
  • Always keep the headphones dry and DON’T expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation .
  • DON’T use the headphones if you feel obvious discomfort, irritation or other adverse reactions.

WARNINGS

  1. Charging cable: Only use charging cable of standard Micro-USB (5 feet).
  2. USB wall charger: If you use a USB wall charger for charging, make sure its output DC voltage should be 5V-5.5V, and its output current should exceed 500mA.

Charging the battery

The built-in battery is rechargeable and non-detachable. DON’T try to replace the battery on your own.

  1. Turn off the headphones before charging.
  2. Plug the small end of the included USB cable into the charging connector on the right earcup. Plug the other end into a computer or USB wall charger. When charging, the red light stays on.
  3. Allow 2.5 hours for a full charge. Once fully charged, the light will turn to blue.
Charging
Charging the battery

In The Box

In The Box

Headphones Overview

Headphones Overview

Power On/Off ON:
Press and hold the MF Button until you hear Tower on or you see the red and blue light flashing. OFF: Press and hold the MF Button until you hear “Power off’ or you see the red and blue light flashing.

Entering paring mode
When the headphones are off (If not, turn off the headphones first), press and hold the MF Button until you hear “Pairing” or you see the blue light stays on (instead of blinking).

Reconnecting mode
Every time the headphones are turned on, they will enter reconnecting mode automatically with the blue light blinking, connecting to their most recent device automatically.

Pairing

  1. Keep the distance between the headphones and your mobile phone within 1 meter.
  2. Make sure the headphones have entered pairing mode. (See instruction “Entering pairing mode”)
  3. Go to your phone’s Bluetooth settings, make sure the Bluetooth feature is on, add or search devices.
  4. When “A” appears, select it. (If asked for a password or PIN code, enter “0000”)
  5. Once successfully connecting, you will hear “Connected”. Note: If pairing is not successful within 300 seconds, the blue light will go out and the headphones are out of pairing mode. Please repeat the pairing procedure.
Paring

Connecting to 2 mobile phones:

  1. Keep the distance between the headphones and 2 mobile phones within 1 meter.
  2. Make sure the headphones have entered pairing mode. (See instruction “Entering pairing mode”)
  3. Go to the Bluetooth settings on phone 1, make sure the Bluetooth feature is on, add or search devices, select “A”.
  4. Turn off the Bluetooth on phone 1, and turn off the headphones.
  5. Again make sure the headphones have entered pairing mode. (See instruction ‘Entering pairing mode.)
  6. Go to the Bluetooth settings on phone 2, make sure the Bluetooth feature is on, add or search devices, select “A”.
  7. Tum on the Bluetooth of phone 1, and the headphones will connect to it automatically. (If automatic reconnection fails, please Unpair/Forget This Device on the Bluetooth settings of phone 1, and then pair them again)

Reconnecting

  1. Keep the distance between the headphones and your mobile phone within 1 meter.
  2. Tum on the headphones, and they will enter reconnecting mode automatically with the blue light blinking.
  3. Tum on the Bluetooth of your phone, and the headphones will connect toil automatically. (If automatic reconnection fails, please Unpair/Forget This Device on the Bluetooth settings of your phone, and then pair them agan)

Disconnecting the headphones

  1. Turn off the headphones.
  2. Or turn off the Bluetooth on your phone.
  3. Or leave the headphones 20m (60ft) away from your phone.

Using the headphones to talk (In Bluetodh mode)
Note: Bluetooth made” means the headphones are connected to your phone via Bluetooth

To answer a call
When you receive a call, you will hear a ring tone in the headphones. Press the MF Button wee to answer it.

To end call
When you are on mall, puns the MF Button once to end it .

To reject a call
When you receive a call, you will hear a ring tone in the headphones. To reject it, press and hold the MF Button for 2 seconds.

To radial the last number
Press the MF Button twice.

Voice dial (must be supported by your mobile phone)
Press and hold the MF Button for 2 seconds

Call waiting (must be supported by your mobile phone)
When you are on call 1, and you receive call 2:

Call waiting (need your mobile phone to support)
When you are on call 1, and you receive call 2:

  1. To end call 18, answer call 2: Press the MF Button once
  2. To answer call 2 and put call 1 on hold: Press and hold the MF Button for 2 seconds When you are on call 2, and call 1 is on hold:
  3. To switch back to call 1 and put call 2 on hold: Press and hold the MF Button for 2 seconds
  4. To switch back to call 1 & end call 2: Press the MF Button once .

Track / Volume control ( Bluetooth mode)
Play/Pause: Press the MF Button once
Skip Forward: Press and hold the Vol. Button for 3 seconds
Skip Back: Press and hold the Vol- Button for 3 seconds
Volume Up: Press the Vol, Button once
Volume Down: Press the Vol- Button once

Line-In music playback

  1. Plug the included audio cable into the jack on the left earcup.
  2. Plug the included audio cable into the jack on your phone. Note: Make sure the headphones are turned off before using the audio cable.

Line-out music sharing
Connect headphones 1 to your phone via Bluetooth, and then connect headphones 1 to headphones 2 with the included audio cable.

Turning 3D sound onlolf (In Bluetooth male)
ON: When the headphones are playing music in Bluetooth mode, press the MF button and Volume+ button together once, and you will hear a beep.
OFF: When the 3D sound is on, press the MF button and Volume- button together once, and you will hear a beep.

Clearing the headphones memory
To clear the headphones memory of all paired Bluetooth devices:
Turn on the headphones, press the Vol+ button and Vol-button together and release the buttons.

Clearing the headphones memory

Specifications:

  • Bluetooth version: V4.1
  • Profiles: A2DP, AVRCP, HSP, HFP
  • Transmission frequency range: 2.4GHz-2.48GHz
  • Bluetooth operating range : up to 10m (free space)
  • Audio DAC Resolution: up to 24bitl48KHz Transducers: 4,57mm.2
  • Impedance: 160 Frequency response: 15Hz-25KHz
  • Total harmonic distortion(THD): 0.3%-3%
  • Sound pressure level(SPL) : 118dB
  • Bluetooth music time: up to 20 hours
  • Bluetooth talk time: up to 20 hours
  • Standby time: up to 1000 hours(about 41 days)
  • Charging time: 2.5 hours for Mil charge
  • Temperature ranges: -10 °C to 50°C only

Specifications are subject to change without notification, we apologize for any inconvenience.

Questions about your Manual? Post in the comments!