1. Introduction
This manual provides detailed instructions for the Bluedio BS-3 Portable Bluetooth Wireless Stereo Speaker. The Bluedio BS-3 is designed to deliver clear, full audio and connects wirelessly to most smartphones and tablets. It features a built-in microphone for hands-free calls, allowing you to enjoy and share music anywhere.
Image 1.1: The Bluedio BS-3 Portable Bluetooth Wireless Stereo Speaker in black, showcasing its compact design.
2. Product Overview
Familiarize yourself with the speaker's controls and features.
2.1 Controls and Ports
Image 2.1: Top panel view of the Bluedio BS-3 speaker, highlighting the control buttons.
- MF Button: Multi-function button for power on/off, play/pause, answer/end calls, and Bluetooth pairing.
- Volume+/Previous Track Button: Press to increase volume, hold to go to the previous track.
- Volume-/Next Track Button: Press to decrease volume, hold to go to the next track.
- 3D Button: Activates or deactivates the 3D sound effect.
- Mute Button: Mutes or unmutes audio playback.
- Micro-USB Port: For charging the speaker.
- AUX-in Port: For wired audio connection.
- Microphone: For hands-free calling.
3. Setup
3.1 Charging the Speaker
Before initial use, fully charge the speaker. Connect the provided Micro-USB cable to the speaker's Micro-USB port and the other end to a USB power source (e.g., computer USB port, USB wall adapter). A full charge typically takes 3-4 hours. The indicator light will change to show charging status.
Image 3.1: The Bluedio BS-3 speaker in an outdoor setting, illustrating its portability and up to 5 hours of playtime.
3.2 Bluetooth Pairing
To connect the speaker wirelessly to your device:
- Ensure the speaker is charged.
- Press and hold the MF button until the indicator light flashes blue and red alternately, indicating pairing mode.
- Enable Bluetooth on your smartphone, tablet, or other Bluetooth-enabled device.
- Search for available devices and select "BS-3" from the list.
- Once paired, the indicator light will turn solid blue.
Image 3.2: The Bluedio BS-3 speaker demonstrating Bluetooth 4.1 wireless connectivity and 3.5mm audio cable input.
3.3 Wired Connection (AUX-in)
For devices without Bluetooth or for a direct connection, use the included 3.5mm audio cable:
- Connect one end of the 3.5mm audio cable to the AUX-in port on the speaker.
- Connect the other end to the headphone jack of your audio device (e.g., MP3 player, laptop, smartphone).
- The speaker will automatically switch to AUX mode.
4. Operating Instructions
4.1 Power On/Off
- Power On: Press and hold the MF button until you hear a voice prompt and the indicator light turns blue.
- Power Off: Press and hold the MF button until you hear a voice prompt and the indicator light turns off.
4.2 Music Playback
- Play/Pause: Press the MF button once.
- Volume Up: Press the Volume+ button.
- Volume Down: Press the Volume- button.
- Next Track: Hold the Volume- button.
- Previous Track: Hold the Volume+ button.
4.3 Call Functions
When connected via Bluetooth, the speaker can be used for hands-free calls.
- Answer Call: Press the MF button once when an incoming call rings.
- End Call: Press the MF button once during a call.
- Reject Call: Hold the MF button for 2 seconds when an incoming call rings.
- Redial Last Number: Double-press the MF button.
4.4 3D Sound Effect
The Bluedio BS-3 features a 3D surround sound system for an enhanced audio experience.
- Activate 3D Sound: Press the 3D button once.
- Deactivate 3D Sound: Press the 3D button again.
Image 4.1: An exploded view illustrating the internal components that contribute to the 3D sound effect of the Bluedio BS-3 speaker.
5. Maintenance
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the speaker to extreme temperatures, humidity, or direct sunlight.
- Store the speaker in a cool, dry place when not in use for extended periods.
- Do not attempt to disassemble or repair the speaker yourself, as this will void the warranty.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Low battery. | Charge the speaker fully. |
| Cannot pair via Bluetooth. | Speaker not in pairing mode; Bluetooth disabled on device; too far from device. | Ensure speaker is in pairing mode (flashing blue/red). Enable Bluetooth on your device. Move speaker closer to device (within 10 meters). |
| No sound during playback. | Volume too low; incorrect input mode; device not playing audio. | Increase speaker and device volume. Ensure correct connection (Bluetooth or AUX). Verify audio is playing on the source device. |
| Poor call quality. | Microphone obstruction; weak Bluetooth signal. | Ensure microphone is clear. Move closer to the connected device. |
7. Specifications
- Model: Bluedio BS-3
- Speaker Type: 3D, Surround Sound
- Wireless Technology: Bluetooth 4.1
- Audio Output Power: 10 Watts
- Speaker Size: 52 mm drivers
- Power Source: Battery Powered
- Battery Life: Up to 5 hours (music/talk time), up to 1000 hours (standby time)
- Charging Time: Approximately 3-4 hours
- Control Method: Touch buttons
- Compatible Devices: Laptop, MP3 Player, Smartphone, Tablet
- Dimensions (LxWxH): 22 x 6.8 x 7.6 cm
- Item Weight: 637 grams
- Included Components: Speaker, Micro-USB charging cable, 3.5mm audio cable
8. Warranty and Support
The Bluedio BS-3 speaker comes with a 1-year warranty from the date of purchase. For warranty claims or technical support, please contact Bluedio customer service through their official website or the retailer where the product was purchased. Please retain your proof of purchase for warranty validation.